City Covered From Lawsuits Filed After Hurricane-Damaged Dwellings Demolished
January 15, 2014 —
Tred R. Eyerly - Insurance Law HawaiiThe Fifth Circuit affirmed the District Court's finding that a duty to defend was owed St. Bernard Parish after it was sued for condemning and demolishing housing destroyed by Hurricane Katrina. Lexington Ins. Co. v. St. Bernard Parish Gov't, 2013 U.S. App. LEXIS 24292 (5th Cir. Dec. 6, 2013).
St. Bernard's policies with Lexington provided coverage for "property damage" and "personal and advertising injury." The policies included a $10,000,000 per occurrence and aggregate limit, subject to a $250,000 retained limit.
Lexington denied coverage and filed for a declaratory judgment that the policies' $250,000 retained limit applied separately to each alleged demolition or property damage asserted in the underlying actions. Under this theory, no defense would be owed because no property had a value exceeding $250,000. The District Court found that only one retained limit applied.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
North Carolina Federal Court Holds “Hazardous Materials” Exclusion Does Not Bar Duty to Defend Under CGL Policy for Bodily Injury Claims Arising Out of Direct Exposure to PFAs
December 07, 2020 —
Paul A. Briganti - White and Williams LLPOn October 19, 2020, the U.S. District Court for the Western District of North Carolina held that a “hazardous materials” exclusion contained in a CGL policy did not preclude a duty to defend the insured against claims alleging bodily injury resulting from direct exposure to perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA), which are man-made chemicals within the group of per- and polyfluoroalkyl substances (PFAs).[1]
In Colony Insurance Company v. Buckeye Fire Equipment Company, the insured was named a defendant in hundreds of underlying suits relating to its manufacture of fire equipment containing aqueous film-forming foam (AFFF), a fire suppressant.[2] The underlying plaintiffs alleged that: (a) the AFFF contained PFOS and PFOA; (b) PFOA and PFOS are highly carcinogenic; and (c) exposure to AFFF contained in the defendants’ products caused bodily injury or property damage. Around a third of the underlying complaints alleged harm from both direct exposure to the foam and exposure through the environment. Representative language from those complaints was: “[d]uring [underlying plaintiff’s] employment as a firefighter and firefighter instructor, he was significantly exposed to elevated levels of PFOS and PFOA in their concentrated form as a result of regular contact with [d]efendant’s AFFF products and through PFOS and PFOA having contaminated the FireCollege well system.”
Read the court decisionRead the full story...Reprinted courtesy of
Paul A. Briganti, White and Williams LLPMr. Briganti may be contacted at
brigantip@whiteandwilliams.com
Insurer Not Entitled to Summary Judgment Based Upon Vandalism Exclusion
June 18, 2014 —
Tred R. Eyerly – Insurance Law HawaiiThe court denied the insurer's motion for summary judgment on plaintiff's breach of contract claim because there was a disputed issue of fact regarding the applicability of the vandalism exclusion. Poole v. Untied Servs. Auto. Assn., 2014 N.Y. Misc. LEXIS 2394 (N.Y. Sup. Ct. May 16, 2014).
The plaintiff rented a residence to tenants. The tenants performed repairs to the residence which resulted in damage in excess of $126,000. The tenants vacated the residence. The plaintiff submitted a claim to USAA for benefits under her homeowners' policy.
USAA denied coverage based upon exclusions for damage caused by, among other things, faulty workmanship, renovation and remodeling. Plaintiff sued and USAA moved for summary judgment.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
In Hong Kong, You Can Find a Home Where the Buffalo Roam
September 17, 2014 —
Shai Oster – BloombergTo city dwellers worried about mice and rats, spare a thought for Hong Kongers confronting half-ton feral beasts.
A few miles from some of the most densely populated neighborhoods in the world, more than 1,000 cows and buffalo from abandoned farms roam the countryside. Development now is pushing them into harm’s way and onto roads.
Hong Kong represents an extreme example of the task many communities face of balancing conservation and growth. Wolves sniff near the suburbs of Paris, bears roam Lake Tahoe and moose stumble across the roads of Halifax. There’s a new word to describe how undomesticated animals adapt to man-made environments: synurbanization.
Read the court decisionRead the full story...Reprinted courtesy of
Shai Oster, BloombergShai Oster may be contacted at
soster@bloomberg.net
Florida Representative Wants to Change Statute of Repose
December 10, 2015 —
Beverley BevenFlorez-CDJ STAFFCurrently in Florida, the ten year clock for construction defect claims typically starts ticking after the final payment is made by the owner. However, WFSU reported, Representative Keith Perry wants to change it so that the completion of the construction triggers the statute of repose.
This change “could favor the construction industry, by shifting the power to start the clock from home owners to builders,” WFSU claimed. Representative Dwight Dudley worries about “what would happen if a contractor felt she was finished but the property owner didn’t agree.”
Read the court decisionRead the full story...Reprinted courtesy of
The Living Makes Buildings Better with Computational Design
November 12, 2019 —
Aarni Heiskanen - AEC BusinessThe AEC industry has a responsibility and mandate when it comes to addressing significant global challenges in the sector and improving operational practice. Professionals such as Lorenzo Villaggi, Senior Research Scientist at The Living, believe that new design technologies hold the key to better-performing built environments.
“Although I’m trained as an architect, I’ve always had an interest in how technology can interact with and have an impact on design processes,” says Lorenzo. “I’ve developed a familiarity with advanced computational tools and eventually developed my own.”
These computational tools are primarily designed to assist with the generation of design options and improve performance analysis. They range from small systems that help users design faster, all the way to elaborate software that can perform complex, mission-critical tasks.
Read the court decisionRead the full story...Reprinted courtesy of
Aarni Heiskanen, AEC BusinessMr. Heiskanen may be contacted at
aec-business@aepartners.fi
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Is the Construction Industry Actually a Technology Hotbed?
August 19, 2024 —
Andrew Silver - Construction ExecutiveTechnology has always been a driving force behind progress, and the construction industry is no exception. Over the years, technological advancements have revolutionized the way companies design, plan and build structures, leading to increased efficiency, safety and sustainability. From virtual-reality simulations to drones and 3D printing, technology has transformed every aspect of the construction process. However, the construction trades still lag behind other sectors in adoption of digital technologies. With a lack of skilled labor continuing to be an impediment to growth and profitability in the construction industry, technological developments could have significant implications for successful adopters.
Already, the industry is seeing a huge difference in valuation between traditional engineering and construction firms and construction software companies. As labor shortages continue to hinder growth in the industry, consolidation is likely, as is the probability that companies with the greatest tech capabilities will be the most highly valued. There are several areas of technology that are of the greatest interest in the current marketplace.
BIM
Building information modeling with computer-aided design software now allows architects and engineers to create detailed and accurate 3D models of buildings and infrastructure projects, integrating data about every aspect of the building, from materials and costs to energy efficiency and maintenance schedules. These models not only help in visualizing the final product; they also enable better communication and collaboration among project stakeholders.
Reprinted courtesy of
Andrew Silver, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
