Fairfield Connecticut Building Expert Directory

Protect Workers From Falls: A Leading Cause of Death

August 14, 2018 — Mark McGhiey - Construction Executive
One of the leading causes of death for construction workers is falls from elevated surfaces, according to the Bureau of Labor Statistics. In 2016, these accidents accounted for more than 30 percent of all construction fatalities. The top four causes of worker deaths (excluding highway collisions) in the private sector construction industry are:

falls: 384 (38.7%);
struck by object: 93 (9.4 percent);
electrocutions: 82 (8.3 percent); and
caught-in/between:1 72 (7.3 percent).

One of the most common — and costly — causes of claims occur when construction workers fall from elevated surfaces. These accidents represent more than 30 percent of all construction claim payments. Reprinted courtesy of Mark McGhiey, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Construction Workers Face Dangers on the Job

November 18, 2011 — CDJ STAFF

OSHA calculates that for each 33,000 active construction workers, one will die on the job each year, making their risk over the course of their careers at one out of every 200 workers. This puts it many times over OSHA’s definition of “significant risk” of 1 death per 1,000 workers over the course of their careers. According to an article in People’s World, “the main risk of death is from falls.”

At a talk at the American Public Health Association’s meeting, one expert noted that “construction workers make up 6 percent to 8 percent of all workers, but account for 20 percent of all deaths on the job every year.”

Read the full story…

Read the court decision
Read the full story...
Reprinted courtesy of

Ex-Detroit Demolition Official Sentenced for Taking Bribes

November 24, 2019 — Jeff Yoders - Engineering News-Record
Aradondo Haskins, a former Detroit demolition projects official, has been sentenced to a year in federal prison for accepting $26,500 in bribes from contractors and rigging bids to tear down homes in a federally funded demolition program. U.S. District Judge Victoria Roberts handed down the sentence on Sept. 23 and ordered Haskins to pay a $5,000 fine and forfeit bribes he took while employed by demolition contractor Adamo Group and by the city. The charges against Haskins were unsealed on April 8, shortly before he pled guilty. Reprinted courtesy of Jeff Yoders, Engineering News-Record Mr. Yoders may be contacted at yodersj@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

City and Contractor Disclaim Responsibility for Construction Error that Lead to Blast

November 13, 2013 — CDJ STAFF
The city of Grand Junction, Colorado and their contractor, Aperion Utility Construction, LLC, have both denied any wrongdoing in the construction accident that lead to the destruction of two homes. Aperion was drilling in order to repair traffic signals. Their drill damaged a gas line. In the subsequent explosion, three people were injured and two homes destroyed. Homes for 10 blocks were subsequently evacuated. The three men who were injured have filed a lawsuit claiming negligence on the part of the contractor and the city. The city has released a report from their insurers that concluded that the city was not responsible. Read the court decision
Read the full story...
Reprinted courtesy of

The A, B and C’s of Contracting and Self-Performing Work Under California’s Contractor’s License Law

July 19, 2017 — Garret Murai - California Construction Law Blog

Class A – General Engineering Contractors;
Class B – General Building Contractors; and
Class C – Specialty Contractors of which there are currently 42 different Class C specialty contractors license types.

Each of these license classifications has separate contracting rules, and rules regarding when work can be self-performed, which for many can be confusing. Minor Work Exception One important (albeit “minor”) exception is that no contractor’s license is required no matter what type of work is being performed if the project has a value of less than $500. Known as the “minor work exception,” the exception is a project-based, not work-based, exception. Thus, for example, if a project owner is remodeling their kitchen at a cost of $6,000 and the cost of doing the flooring is only $300, the person doing the flooring would need to have a contractor’s license in the appropriate classification since the aggregate cost of the work is $500 or more. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Roadway Contractor Owed Duty of Care to Driver Injured Outside of Construction Zone

January 04, 2021 — Garret Murai - California Construction Law Blog
For the roadway contractor it appeared to be an open and shut case: Plaintiff car driver was stopped at a standard one-way “reversing lane closure” traffic control in which traffic going in one direction would be stopped while traffic going in the other direction was allowed to proceed, and then the procedure would be reversed. Plaintiff, while stopped at the traffic control, was rear-ended by another vehicle driven by George Smithson. Smithson testified that he “must have looked off to the side” at some point prior to the collision because he did not see plaintiff’s vehicle before hitting it. He also testified that the primary reason the accident happened was that he was not paying attention and that he knew of no other cause of the accident. For the roadway contractor you couldn’t ask for a better admission. And it ended in the trial court just the way you thought it would, with a win for the roadway contractor. That is, until it was appealed. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

The Moving Finish Line: Statutes of Limitation and Repose Are Not Always What They Seem

June 01, 2020 — Kenneth E. Rubinstein & Nathan Fennessy - Construction Executive
Having an end date for risk is important to construction professionals who need to know when they can close their books and destroy files relating to old projects. While professionals typically look to the statute of limitations and repose, these deadlines can sometimes be harder to determine than one might think. State Laws Prohibiting Alteration of Statutes of Limitation Many contractors seek to control the extent of their risk by negotiating the length of their liability period. In some instances, contractors may seek to shorten the statute of limitations to protect against stale claims. While in other instances, owners periodically negotiate for longer periods to ensure that they will not be time barred from pursuing valid claims. While the majority of states enforce such contractual provision, a number of states hold such clauses unenforceable. In these instances, the state’s original statute of limitations will apply regardless of what the contract says. Reprinted courtesy of Kenneth E. Rubinstein & Nathan Fennessy, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Rubenstein may be contacted at krubinstein@preti.com Mr. Fennessy may be contacted at nfennessy@Preti.com Read the court decision
Read the full story...
Reprinted courtesy of

The Requirement to Post Collateral Under General Agreement of Indemnity Is Real

May 16, 2022 — David Adelstein - Florida Construction Legal Updates
In prior postings, I have discussed the all-powerful General Agreement of Indemnity (click here and here). This is the document a bond-principal executes to obtain bonds (e.g., performance and payment bonds). Not only does the bond-principal execute this General Agreement of Indemnity, but typically, so do other indemnitors such as the company’s principals and their spouses, other related companies, etc. The objective is that the surety has financial comfort that if a claim is made against the bond, there are avenues where it will get reimbursed and indemnified for any cost it incurs, or payment it makes, relative to that claim against the bond. When a surety issues bonds, the objective is that all losses it incurs gets reimbursed because the bonds are NOT insurance policies. One of the powerful tools the surety can exercise in the General Agreement of Indemnity is to demand the bond-principal and other indemnitors to post collateral in an amount the surety deems sufficient to cover any losses it may incur. This is a right in any General Agreement of Indemnity I have seen and is a right the surety can rightfully exercise. A recent example is shown from the opinion in Philadelphia Indemnity Ins. Co. v. Quinco Electrical, Inc., 2022 WL 1230110 (M.D.Fla. 2022), which pertains to the surety’s motion for preliminary injunction. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES