Cambridge Massachusetts Building Expert Directory

BLOK, a Wired UK Hottest 100 Housing Market Startup, Gets Funding from a Renowned Group of Investors

October 11, 2017 — Aarni Heiskanen - AEC Business
Blok, listed as one of the Hottest 100 European Startups by Wired UK, has secured several renowned investors to promote the company’s product development and marketing in its second round of financing. The Helsinki-based startup company aims to revolutionize the housing market through automation and artificial intelligence. Blok believes that the future of the housing market will be on the Internet, where intelligent technology is opening up new opportunities for disrupting traditional business models. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aarni@aepartners.fi

2021 2Q Cost Report: Industry Execs Believe Recovery Is in Full Swing

August 04, 2021 — Jonathan Keller - Engineering News-Record
The first six months of 2021 have seen big materials cost hikes, increasing labor shortages and uncertainty over federal action on a major infrastructure package. Despite the headwinds, ENR’s Construction Industry Confidence Index has surged up 17 points to a rating of 68—the highest single jump between quarters since the index was started in 2009. The previous record was 16 points between Q4 of 2011 and Q1 of 2012. Reprinted courtesy of Jonathan Keller, Engineering News-Record Mr. Keller may be contacted at kellerj@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Surety Trends to Keep an Eye on in the Construction Industry

March 25, 2024 — Oliver Craig - Construction Executive
Reflecting on the dynamics of the 2023 construction and surety industries, it is evident that opportunities and challenges have emerged for contractors that will shape the landscape for the year ahead. Contractors can not only capitalize on these trends but protect the successful companies they have already built. PROJECT OPPORTUNITIES There has been a notable increase in public works opportunities, driven by increased government spending and the aging infrastructure in the United States. This trend is expected to continue in 2024 and beyond, with a notable portion of work coming in transportation- and public-utility-related infrastructure. Due to increased spending, many contractors are reporting historically high backlogs—and that often includes the largest project their company has contracted in their history. While increased spending presents more opportunity, it’s critical contractors be even more diligent about new opportunities, giving additional consideration to the following: Job Selection: New geographies, scope, project owners and/or subcontractor relationships commonly come with a learning curve. With the current state of the market, it’s not the ideal time to be learning costly lessons. Contractors should focus on having a proactive go/no-go strategy when reviewing potential projects to identify risks early and plan accordingly. Reprinted courtesy of Oliver Craig, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Designers George Yabu and Glenn Pushelberg Discuss One57’s Ultra-Luxury Park Hyatt

July 30, 2014 — Jennifer Parker – Bloomberg
One57 might just be the hottest -- or at least the most expensive -- address in New York City.   The $375 million skyscraper currently piercing its blue-glass presence into Manhattan's midtown skyline is home not only to 94 private condos (two of which have already sold for $90 million); it also hosts a brand new Park Hyatt hotel, which opens this August.    Eight years in the making, this Hyatt is the first ultra-luxury hotel New York has seen since the Mandarin Oriental opened in 2003. It's intended to be a New York icon. So, naturally, Hyatt hired two Canadian guys to design it.   Meet George Yabu and Glenn Pushelberg, the dynamic couple who met as college students in Toronto in 1972, and decided to launch design firm YabuPushelberg. Now, they're earning millions per project to design luxury hotels, restaurants, and residences all over the world. Read the court decision
Read the full story...
Reprinted courtesy of Jennifer Parker, Bloomberg

Insurer’s “Failure to Cooperate” Defense

November 14, 2018 — David Adelstein - Florida Construction Legal Updates
The “failure to cooperate” defense is a defense an insurer may raise when its insured fails to cooperate with it in the defense of the claim against the insured. If an insurer takes this position, it will typically be denying both defense and indemnification obligations, meaning the insured could be forfeiting coverage that otherwise exists through his/her/its failure to cooperate with the insurer. This defense by the insurer is not absolute as recently explained by the Fourth District in Barthelemy v. Safeco Ins. Co. of Illinois, 43 Fla.L.Weekly D2379a (Fla. 4th DCA 2018) discussing the elements of this failure to cooperate defense. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Reminder About the Upcoming Mechanic’s Lien Form Change

August 26, 2019 — Christopher G. Hill - Construction Law Musings
As July 1, 2019 approaches with its inevitable changes to the Virginia Code, I wanted to remind you once again that the statutory form for a Virginia mechanic’s lien will change as of that date. HB2409 passed both houses of the General Assembly and has been signed by the Governor. This bill reconciled the language found in Virginia Code Sec. 43-4 with the various forms for general contractor, subcontractor and sub-subcontractor/supplier forms found in later sections of the code. As you will see if you download the .pdf of the bill as signed, this involved some tweaks to 43-4 and some updates to the mechanic’s lien forms that are in the code. The recent Desai case from the Virginia Supreme Court made it clear that such action was necessary. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

California Precludes Surety from Asserting Pay-When-Paid Provision as Defense to Payment Bond Claim

December 21, 2020 — Nicholas Korst - Ahlers Cressman & Sleight PLLC
In a recent case in California, the Court of Appeals held that a surety who had issued a public works payment bond cannot rely on the “Pay-When-Paid” provision in the subcontract as a defense against the subcontractor’s claim against the payment bond.[1] The case was a public works project in Kern County, CA where the North Edwards Water District (the “District”) hired Clark Bros., Inc. (“Clark”) as the general contractor to build an arsenic removal water treatment plant. Clark hired subcontractor Crosno Construction (“Crosno”) to build and coat two steel reservoir tanks. The subcontract included the following “pay-when-paid” provision, which provided a definition of “reasonable time”: If the Owner or other responsible party delays in making any payment to the Contractor from which payment to Subcontractor is made, Contractor and its sureties shall have a reasonable time to make payment. “Reasonable time” shall be determined according to the relevant circumstances, but in no event shall be less than the time Contractor and Subcontractor require to pursue to conclusion their legal remedies against the Owner or other responsible party to obtain payment, including (but not limited to) mechanics lien remedies. (emphasis added). Read the court decision
Read the full story...
Reprinted courtesy of Nick Korst, Ahlers Cressman & Sleight PLLC
Mr. Korst may be contacted at nicholas.korst@acslawyers.com

OSHA Finalizes PPE Fitting Requirement for Construction Workers

December 31, 2024 — Jonathan H. Schaefer - Construction Law Zone
On December 11, 2024, the Occupational Safety and Health Administration (OSHA) announced it finalized a revision to the personal protective equipment (PPE) standard for the construction industry. The final rule adds specific language to the existing standard requiring employers to provide properly fitting PPE for construction industry workers. This change aligns the construction industry with the standards in place for the general industry. According to OSHA, many types of PPE must properly fit workers. Improperly sized PPE can ineffectively protect workers, creating new hazards for them, such as oversized gloves or protective clothing being caught in machinery and discouraging use because of discomfort or poor fit. OSHA stated that the longstanding issue with improperly fitting PPE particularly impacted women, as well as physically smaller or larger workers. Read the court decision
Read the full story...
Reprinted courtesy of Jonathan H. Schaefer, Robinson+Cole
Mr. Schaefer may be contacted at jschaefer@rc.com

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES