Fannie-Freddie Elimination Model in Apartments: Mortgages
April 08, 2014 —
Sarah Mulholland – BloombergThe apartment-lending units of Fannie Mae (FNMA) and Freddie Mac were among their few money makers after the U.S. housing collapse. Now they should help transform the U.S. mortgage industry.
Lawmakers seeking to eliminate the two government lenders, which were seized by regulators during the 2008 credit crisis, see an antidote to the reckless lending that blew up the U.S. housing market in the structure of the firms’ multifamily operations, which share risks with lenders.
Senate Banking Committee Chairman Tim Johnson and Republican Mike Crapo are proposing legislation to create a new government-backed reinsurer of mortgage bonds that would require private investors to bear losses on the first 10 percent of capital. The model for the provision mirrors Fannie Mae and Freddie Mac (FMCC)’s multifamily lending operations, requiring lenders to shoulder some of the risk on loans they originate.
Read the court decisionRead the full story...Reprinted courtesy of
Sarah Mulholland, BloombergMs. Mulholland may be contacted at
smulholland3@bloomberg.net
Tarriffs, a Pandemic and War: Construction Contracts Must Withstand the Unforeseeable
May 16, 2022 —
Brett Moritz, Adrian Bastianelli III & Adam Handfinger - Construction ExecutiveSince the tariffs on steel and the first wave of the COVID-19 pandemic, the construction industry has been reeling from the impact of material shortages and price increases, labor shortages, breakdowns in the supply chain and the inflationary effect of these issues. Unfortunately, the war in Ukraine has only exacerbated the situation.
International conflicts can constrain supply, resulting in delays and price increases for contractors, subcontractors and suppliers. The disruption caused by the war is expected to be particularly acute due to the role that Russia and Ukraine play in the world economy and the effect of the economic sanctions that have been imposed on Russia by the United States and other countries. Russia controls approximately 10% of the global copper reserves and is estimated to produce about 10% of the world’s nickel supply. It also provides at least 30% of Europe’s oil and natural gas. Ukraine is a significant source of raw materials, such as iron. Thus, the war will cause significant shortages and price increases to the global construction industry. There are already reports of delays and cost increases for commodities such as nickel, aluminum, copper and—most importantly—steel, which have resulted in impacts to construction costs and schedules. Suppliers are especially sensitive to the volatile markets caused by these conditions. Some are insisting on automatic price increases in their purchase orders.
All of this, not to mention the anticipation of what may come next, points to the necessity for a new paradigm to achieve a successful project. It is more important today than ever that owners, contractors, subcontractors and suppliers reasonably address the economic and time impacts of these unforeseeable events in preparing contracts for future work and in administering existing contracts. Otherwise, the risk of a default on more than one level may put projects in jeopardy, to no one’s benefit.
Reprinted courtesy of
Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
California Supreme Court Adopts Vertical Exhaustion for Long-Tail Claims
June 15, 2020 —
Tred R. Eyerly - Insurance Law HawaiiIn another round of litigation involving coverage issues between Montrose Chemical Corporation and its insurers, the California Supreme Court ruled in favor of Montrose, adopting vertical exhaustion of excess policies. Montrose Chem. Corp. of Calif. v. The Superior Court of Los Angeles County, 9 Ca. 5th 215 (2020).
In 1990, the United States and the State of California sued Montrose for contamination from 1947 to 1982 caused by Montrose's facility manufacturing insecticides. Montrose had primary and excess liability policies from defendant insurers between 1961 and 1985. Forty insurers collectively issued more than 115 excess policies, which collectively provided coverage sufficient to indemnify Montrose's anticipate total liability.
Primary coverage was exhausted. Each excess policy provided that Montrose had to exhaust the limits of its underlying coverage before there would be excess coverage. Which excess carrier could be called on first was the issued before the California Supreme Court.
Montrose proposed a rule of "vertical exhaustion" or "elective stacking," whereby it could access any excess policy once it exhausted other policies with lower attachment points in the same policy period. The insurers, in contract, argued for "horizontal exhaustion," whereby Montrose could access an excess policy only after it exhausted other policies with lower attachment points from every policy period in which the environmental damage resulting in liability occurred.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
$1.9 Trillion Stimulus: Five Things Employers Need to Know
March 15, 2021 —
Matthew C. Lewis & Rana Ayazi - Payne & FearsOn March 11, 2021, President Biden signed H.R.1319 - American Rescue Plan Act of 2021 (“Rescue Plan”) into law—a $1.9 trillion stimulus bill. Here are five things every employer should know about the bill.
1. FFCRA Tax Credits Have Been Extended
The Rescue Plan extends the Families First Coronavirus Response Act (FFCRA) tax credit provisions—again—through September 30, 2021. (The ability to recoup the cost of FFCRA leave was previously extended in December 2020 through March 31, 2021: See related article here. Employers that opt to voluntarily provide FFCRA leave will be credited 100 percent for all qualifying wages paid under the FFCRA.
Any employer already providing FFCRA-like leave to employees under state, county, and/or local paid sick leave ordinances, especially if their business is located in California (e.g.,
Cal/OSHA’s COVID-19 Prevention Emergency Temporary Standards) should consider opting to voluntarily provide FFCRA-compliant leave, as by doing so they may be able at least partially to recoup the cost of leave they are otherwise already required to provide.
Reprinted courtesy of
Matthew C. Lewis, Payne & Fears and
Rana Ayazi, Payne & Fears
Mr. Lewis may be contacted at mcl@paynefears.com
Ms. Ayazi may be contacted at ra@paynefears.com
Read the court decisionRead the full story...Reprinted courtesy of
New Orleans Terror Attack Lawsuit Targets Engineer Mott MacDonald, Contractor and City
February 03, 2025 —
Richard Korman - Engineering News-RecordSeven victims who survived the New Year's morning terrorist truck attack on Bourbon Street in New Orleans have filed a negligence lawsuit in state court, in that city, blaming city officials, engineer Mott MacDonald and a contractor for the deaths.
Read the court decisionRead the full story...Reprinted courtesy of
Richard Korman, Engineering News-Record
Additional Insured Not Entitled to Indemnity Coverage For Damage Caused by Named Insured
February 23, 2017 —
Tred R. Eyerly – Insurance Law HawaiiThe additional insured unsuccessfully sought to recover damages to its building caused by the named insured. Brit UW, Ltd. v. Tripar, Inc., 2017 U.S. Dist. LEXIS 2462 (N.D. Ill. Jan. 6, 2017).
Davis Russell Real Estate and Management LLC hired Tripar, Inc., a general contractor, to renovate a 12-unit apartment building. The entire roof was to be replaced by a roofing subcontractor. Davis Russell drafted a Professional Services Agreement (PSA) that governed the project. Tripar was to obtain a CGL policy and provide a certificate of insurance evidencing the coverage. Davis Russell was to be named as an additional insured.
Tripar's insurance broker prepared a certificate of insurance reflecting that a CGL policy was issued to Tripar by Brit UW, Ltd. But the certificate clearly stated that it was not issued by the insurer and that it did not alter coverage. The certificate of insurance further stated that it conferred no rights upon the holder.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
3D Printing Innovations Enhance Building Safety
October 07, 2019 —
Mahmut Ekenel & Melissa Sanchez - Construction ExecutiveThe mention of 3D printing alone is enough to get people excited, often conjuring images of a desktop console that can download and create three dimensional objects such as prototypes, or mechanical parts. And yet, in recent years the technology has given way to a slight impatience, as people begin to wonder how and when it will have a direct impact on both their lifestyles and their businesses.
The construction industry has been quick to take advantage of these innovations, and the effects are tangible, especially regarding building safety. The 3D construction technology allows for several key advantages in terms of faster construction times, uncompromised quality of construction and lower costs—allowing for affordable dwellings to be quickly built for people in need.
These advantages also lead to safety improvements during the building process. The ability to accelerate construction time without requiring an increase in labor results in a fewer construction-related workplace injuries and a reduction in material waste, making it an environmentally friendly construction method as well.
ICC-Evaluation Service (ICC-ES), a subsidiary of the International Code Council (ICC) which develops model codes and standards (i.e. International Building Code, International Residential Code) and delivers a wide array of building safety services, has taken the lead on developing acceptance criteria to address building code compliance of 3D printed construction. Currently, 3D construction technology is not within the provisions of the International Building Code (IBC) or International Residential Code (IRC). The acceptance criteria introduces new compliance measures for interior and exterior 3D printed concrete walls (with and without structural steel reinforcement), load-bearing and non-load-bearing walls, and shear walls in one-story, single-unit, residential dwellings. The 3D walls are constructed by printing two outer layers of 3D concrete and then filling the core with 3D concrete to form a solid wall.
Reprinted courtesy of
Mahmut Ekenel & Melissa Sanchez, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Mr. Ekenel may be contacted at mekenel@icc-es.org
Ms. Sanchez may be contacted at msanchez@icc-es.org
Read the court decisionRead the full story...Reprinted courtesy of
Cogently Written Opinion Finds Coverage for Loss Caused By Defective Concrete
November 07, 2012 —
Tred Eyerly, Insurance Law HawaiiIf ever in need of a concise, well-reasoned opinion on “occurrence,” “property damage” and applicability of the business risk exclusions, turn to Pamperin Rentals II, LLC v. R.G. Hendricks & Sons Construction, Inc., 2012 Wis Ct. App. LEXIS 698 (Wis. Ct. App. Sept. 5, 2012).
A contractor was hired to install concrete during construction of seven gas stations. Red-D-Mix provided the concrete. The contractor and Red-D-Mix were eventually sued by the gas stations, based upon allegations that the concrete was defectively manufactured and installed. The gas stations alleged that Red-D-Mix supplied concrete that was defective and resulted in damages, including the need to repair nearby asphalt.
Red-D-Mix tendered to its insurers, who denied coverage. Suit was filed and the insurers moved for summary judgment. The trial court determined there were no allegations of either “property damage” or an “occurrence.” Therefore, there was no duty to defend or indemnify Red-D-Mix.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law Hawaii. Mr. Eyerly can be contacted at
te@hawaiilawyer.com