Cambridge Massachusetts Building Expert Directory

Pennsylvania Court Finds that Two Possible Causes Can Prove a Product Malfunction Theory of Liability

September 29, 2021 — Gus Sara - The Subrogation Strategist
In Allstate Ins. Co. v. LG Elecs. USA, Inc., No. 19-3529, 2021 U.S. Dist. LEXIS 127014, the United States District Court for the Eastern District of Pennsylvania considered whether plaintiff’s expert engineer’s opinion that there were two possible causes of a fire—both related to alleged product defects within a refrigerator manufactured by the defendant—was sufficient to support the malfunction theory of products liability. The court found that because both potential causes imposed liability on the product manufacturer and the expert ruled out misuse of the product, as well as all external causes of the fire, it was not necessary for the engineer to identify a specific cause under the malfunction theory. The court also found that the expert’s investigation and opinions met the criteria set forth in Daubert v. Merrell Dow Pharms., Inc., 509 U.S. 579 (1993) and the Federal Rules of Evidence and, thus, were admissible. LG Electronics arose from a fire at the home of Thomas and Lisa Ellis. The public sector fire investigator identified the area of fire origin as the top of a refrigerator manufactured by LG Electronics USA, Inc. (LG). The Ellises filed a claim with their homeowner’s insurance carrier, Allstate Insurance Company (Insurer). Insurer retained a fire investigator and an electrical engineer to investigate the origin and cause of the fire. The fire investigator agreed with the public sector investigator that the fire originated at the top of the refrigerator. The engineer conducted a forensic inspection of the scene and ruled out all potential external ignition sources. He then examined the internal components of the refrigerator. He found arcing activity on a wire at the front top of the refrigerator. He opined that there were two possible causes of the fire: either the heater circuit insulation failed over time due to mechanical damage, or the heat from the internal light fixture ignited combustible components of the refrigerator. Since the engineer ruled out improper use of the refrigerator, he opined that the damage was caused by a manufacturing defect. Read the court decision
Read the full story...
Reprinted courtesy of Gus Sara, White and Williams
Mr. Sara may be contacted at sarag@whiteandwilliams.com

What You Should Know About Liquidated Damages and Liability Caps for Delay and Performance Liquidated Damages

May 06, 2024 — Chris Cazenave - ConsensusDocs
Liquidated damage clauses are omnipresent in today’s construction contracts—often considered in early negotiations to provide a degree of certainty and limit financial liability. There are two principal types of LDs appearing in construction contracts—(i.) damages for delay when a contractor fails to deliver a project by a certain milestone; and (ii.) performance damages when a contractor fails to meet specific performance requirements. Differentiating between LDs for delay and LDs for performance—especially when both LD types are combined in the same contract—is key to risk awareness and allocation during contract negotiations and throughout performance. This article briefly outlines what you should know about LDs for delay and LDs for failing to meet certain performance requirements. The article also covers how contractors can allocate and cap risks based on risks each party can either manage, insure, or otherwise limit. Read the court decision
Read the full story...
Reprinted courtesy of Chris Cazenave, Jones Walker LLP
Mr. Cazenave may be contacted at ccazenave@joneswalker.com

Hotel Claims Construction Defect Could Have Caused Collapse

December 30, 2013 — CDJ STAFF
The owners of the Crowne Plaza New Orleans Airport, in Kenner, Louisiana, have filed a lawsuit claiming that a defective beam installed during renovations put the building at risk of collapse, reports The Louisiana Record. The hotel was sold to its current owners, 2929 Williams Blvd, LLC, in 2006, and the renovations began after Hurricane Katrina in 2007. The renovations converted an indoor pool area into a ballroom. The renovations were finished in 2008, but hotel staff noticed the walls and ceiling of the ballroom were sagging by September 2011. A structural engineer determined that a main beam had failed, risking collapse of the entire building. The hotel owners set upon repairing the structure and now seek reimbursement. 2929 Williams Blvd., LLC is suing Trimark Constructors LLC, Kyle Associates LLC, and Avengo Baily & Associates, Inc. for an unspecified amount of damages. Read the court decision
Read the full story...
Reprinted courtesy of

Testing Your Nail Knowledge

September 03, 2014 — Beverley BevenFlorez-CDJ STAFF
Tools of the Trade provided “ten things you probably don’t know about nails.” For instance, “[I]n 2013 the U.S consumed 629,716 tons of steel nails.” Frane, the author of the article, said that if that “many nails were melted down and cast into a block of solid steel, the block would cover the area of a football field to a depth of 45’.” Another fact is that only 21% of nails used in the U.S. were made in the U.S. Furthermore, the leading U.S. supplier of nails is Mid Continent Nail Corporation, and they are located in Poplar, Missouri. Read the court decision
Read the full story...
Reprinted courtesy of

Meritage Acquires Legendary Communities

July 23, 2014 — Beverley BevenFlorez-CDJ STAFF
According to Big Builder, Meritage entered Atlanta through its acquisition of Legendary Communities for $130 million, “completing a two-year quest.” “Probably for about two years, we’ve been looking in the market, talking to builders, and studying the geography, and meeting different people to learn who the players are and learn about the area,” Meritage Homes chairman and CEO Steven J. Hilton told Big Builder. This acquisition makes Meritage Homes “the number one builder in the Greenville-Anderson-Mauldin, S.C. market, owning more than 16 percent of the 2013 market share with 266 closings, according to Metrostudy data. It also owns almost seven percent of the market share in nearby Spartanburg, S.C. with 44 closings.” Legendary fits “in very nicely with what we do at Meritage,” Hilton said to Big Builder. “We’re a strong first and second move up builder, as are they at Legendary. It’s a very complementary fit between the two companies.” Read the court decision
Read the full story...
Reprinted courtesy of

Just a House That Uses 90 Percent Less Energy Than Yours, That's All

August 20, 2014 — Amelia Hennighausen – Bloomberg
Active City, Passive House From the tallest skyscraper to the humblest suburban abode, the buildings that we live and work in draw about 70 percent of the nation’s annual electricity. They burn more than a quarter of the natural gas the U.S. consumes every year. They eat all that energy for a simple reason: They were designed to. But that needn’t be the case in the future. Enter the “passive house,” a kind of super-efficient building that’s highly insulated, heated mostly by the sun and sealed air-tight. It is, in other words, an energy trap. Read the court decision
Read the full story...
Reprinted courtesy of Amelia Hennighausen, Bloomberg

Home Prices in 20 U.S. Cities Rose at a Faster Pace in October

January 06, 2016 — Victoria Stilwell & Michelle Jamrisko – Bloomberg
Home values in 20 U.S. cities rose at a faster pace in the year ended October as lean inventories of available properties combined with steadily improving demand. The S&P/Case-Shiller index of property values climbed 5.5 percent from October 2014 after rising 5.4 percent in the year ended September, the group said Tuesday in New York. The median projection of 21 economists surveyed by Bloomberg called for a 5.6 percent advance. Nationally, prices rose 5.2 percent year-over-year. A limited supply of properties for sale has helped prop up home values, boosting the household wealth levels of U.S. homeowners in the process. Faster wage growth and continued low borrowing costs will be needed to keep low-income and first-time buyers in the market and provide the next leg of growth in the housing recovery. Reprinted courtesy of Victoria Stilwell, Bloomberg and Michelle Jamrisko, Bloomberg Read the court decision
Read the full story...
Reprinted courtesy of

New Opportunities for “Small” Construction Contractors as SBA Adjusts Its Size Standards Again Due to Unprecedented Inflation

September 11, 2023 — Hanna Lee Blake - ConsensusDocs
Thanks to the SBA’s November 17, 2022 adjustments to the size standards and monetary thresholds, a number of construction contractors will be able to retain their “small” status, and more contractors may benefit from federal assistance, programs, and contracts earmarked for “small” concerns. In the SBA’s view, small businesses should not lose their “small” status due solely to price level increases rather than from increases in business activity. It is anticipated that federal agencies may choose to set aside more construction contracts for competition among small businesses given the greater number of businesses that may be deemed “small” as a result of the SBA’s recent rule. In light of this, small construction contractors should consider whether it is prudent to register or update their existing profiles in the System for Award Management (SAM) to participate in federal contracting. The SBA’s Statutory Mandate The Small Business Act of 1953 (P.L. 83-163, as amended) authorized the SBA and justified the agency’s existence on the grounds that small businesses are essential to the maintenance of the free enterprise system. The congressional intent was to assist small businesses as a means to deter monopoly and oligarchy formation within all industries and the market failures caused by the elimination or reduction of competition in the marketplace. Congress delegated to the SBA the responsibility to establish size standards to ensure that only small businesses were provided SBA assistance. Since that time, the SBA has analyzed various economic factors, such as each industry’s overall competitiveness and the competitiveness of firms within each industry, to set its size standards. Read the court decision
Read the full story...
Reprinted courtesy of Hanna Lee Blake, Watt Tieder
Ms. Blake may be contacted at hblake@watttieder.com

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES