Fairfield Connecticut Building Expert Directory

Biggest U.S. Gas Leak Followed Years of Problems, State Says

June 10, 2019 — Mark Chediak & Edvard Pettersson - Bloomberg
The worst natural gas leak in U.S. history, which broke out at a Sempra Energy storage field near Los Angeles almost four years ago, was caused by corrosion, according to a report commissioned by California regulators. The rupture of a 7-inch (18-centimeter) well casing at Sempra Energy’s Aliso Canyon storage complex was due to “microbial corrosion” brought on by contact with groundwater, an independent analysis conducted by Blade Energy Partners and commissioned by two state agencies found. The report also concluded there had been more than 60 leaks in the field dating back to the 1970s, and Sempra didn’t carry out detailed inspections after they occurred, the California Public Utilities Commission and Department of Conservation said in a joint statement. The company’s Southern California Gas lacked “any form of risk assessment” to manage the integrity of its wells and hadn’t established systematic practices to protect against corrosion and monitor well pressure, the agencies said. Reprinted courtesy of Mark Chediak, Bloomberg and Edvard Pettersson, Bloomberg Read the court decision
Read the full story...
Reprinted courtesy of

Ninth Circuit Reverses Grant of Summary Judgment to Insurer For Fortuitous Loss

July 01, 2019 — Tred R. Eyerly - Insurance Law Hawaii
The Ninth Circuit reversed the district court's issuance of summary judgment regarding coverage for damages when the insured's plant had to be shut down due to an accident. Ingenco Holdings, LLC v. Ace American Ins. Co., 2019 U.S. App. LEXIS 10946 (9th Cir. April 15, 2019). Ingenco operated a gas purification plant which converted raw landfill gas into usable natural gas. The final step in the purification process involved the removal of excess nitrogen from the landfill gas. The gas was directed through adsorbent beads, to which nitrogen adhered, contained within pressure vessels.The beads could not withstand the direct pressure of the landfill gas inflow. which, if untreated, could grind the beads down into dust. To reduce the force of the gas flow on the beads, a "diffuser basket" was suspended from the top of each bead-filled pressure vessel. The diffuser basket acted as a shield that prevented the full force of the incoming landfill gas from striking the beads directly. In 2010, metal brackets securing a diffiuser basket broke. This resulted in damage to other components and an eventual shutdown of the entire facility. The plant remained idle for several months as Ingenco investigated alternative nitrogen filtration options and undertook repairs. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

2020s Most Read Construction Law Articles

January 25, 2021 — ConsensusDocs
2020 was . . . well . . . well it was memorable. Among many other things, construction was recognized as essential and ConsensusDocs published industry firsts in addressing prefabricated construction and lean for design-build, as well as 8 comprehensively revised performance and payment bonds. We also saw unprecedented readership of our construction law newsletter. As we celebrate the end of 2020 and wish you a happy new year, we continue a new a tradition of recognizing the below most read construction law articles of the year. The ConsensusDocs Team. 5. Level 10 Construction v. Sea World LLC: Can Force Majeure Save Sea World? By: Jamey B. Collidge Associate, Troutman Pepper. 4. The Designer’s Pre-bid Standard Of Care In A Design-Build Project By: Joshua A. Morehouse Associate, Peckar & Abramson P.C. Read the court decision
Read the full story...
Reprinted courtesy of

New Standard Addresses Wind Turbine Construction Safety Requirements and Identifies Hazards

October 09, 2018 — Christopher Daniels - Construction Executive
American Society of Safety Professionals’ industry consensus standard, ANSI/ASSP A10.21 – 2018 Safety Requirements for Safe Construction and Demolition of Wind Generation/Turbine Facilities, is the first standard to identify and address hazards specific to wind turbine construction. It includes nearly a dozen appendices that provide additional consideration and guidance for hazards that vary between projects, turbines and geographical areas. The new A10.21 standard starts by requiring a site hazard identification prior to construction commencing. It establishes the general contractor as the responsible party for site hazard identification assessment. This is because the general contractor is usually one of the first entities on site able to assess the various challenges/concerns such as: geography, utilities, environmental, etc. This assessment is usually done by driving the project site and identifying GPS coordinates of specific challenges. Reprinted courtesy of Christopher Daniels, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Daniels may be contacted at chris.daniels@mortenson.com

5 Impressive Construction Projects in North Carolina

February 04, 2014 — Melissa Dewey Brumback – Construction Law in North Carolina
What are your top construction building projects in North Carolina? Do you have a “short list”? Author Ralitsa Golemanova of JW Surety Bonds does, and she has the reasoning behind them. Ralista’s Top 5, which all “present a different facet of exceptional modern design and construction” are presented below. For her full commentary and some great pictures of the projects, check out her full article. Her list, in no particular order, includes: 1. The North Carolina Museum of Art’s West Building Expansion The 127,000 square-feet West Building Expansion of the North Carolina Museum of Arts won the 2011 American Institute of Architects (AIA) Honor Award for Architecture. The Building is largely made of aluminum panels. One of its specificities is that it does not have any windows. Instead, visibility is ensured through 360 skylights that allow delicate natural light to enter the inner galleries. Read the court decision
Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Construction Law in North Carolina
Ms. Brumback can be contacted at mbrumback@rl-law.com

Using the Prevention Doctrine

April 22, 2019 — David Erhart - Gordon & Rees Construction Law Blog
The following scenario happens regularly in the construction industry. A contractor on a project reaches out to a subcontractor to perform work. Excited about the prospect of performing the work, the subcontractor signs a contract and puts it nose to the grindstone. After dutifully completing the work the subcontractor turns to the contractor and asks to be paid. But, the contractor refuses saying that there is a provision in the subcontract that says the contractor is only obligated to pay the subcontractor if the contractor receives payment from the owner. So the contractor has completed the work, but has no money to show for it. One potential remedy for a subcontractor in this situation is the use of the prevention doctrine. “Under the prevention doctrine, ‘if a promisor prevents or hinders fulfillment of a condition to his performance, the condition may be waived or excused.’” Cox v. SNAP, Inc., 859 F.3d 304, 308 (4th Cir. 2017) (quoting Moore Bros. Co. v. Brown & Root, Inc., 207 F.3d 7171, 725 (4th Cir. 2000)). “Put simply, ‘where a party to a contract is the cause of the failure of the performance of the obligation due him or her, that party cannot in any way take advantage of that failure.’” Haddon Hous Assocs v. United States, 711 F.3d 1330, 1338 (Fed. Cir. 2013) (quoting Restatement (Second) of Contracts § 245; Williston, § 39:4). Read the court decision
Read the full story...
Reprinted courtesy of David Erhart, Gordon & Rees Scully Mansukhani
Mr. Erhart may be contacted at derhart@grsm.com

Georgia Court Rules that Separate Settlements Are Not the End of the Matter

October 14, 2013 — CDJ STAFF
The Georgia Court of Appeals recently took up the question of how parties in a construction defect settlement relate to one another in terms of apportioning the settlement. Scott Murphy, writing on the Barnes & Thornburg blog clarifies the issues. The underlying construction defect case involved a newly-constructed hotel with mold and mildew problems. The owners sued the contractor (for negligent construction) and the architect (for negligent design). Separately, the owners settled with the contractor for $2.3 million and the architect for $100,000. Subsequently, the contractor sued the architect, attempting to recover part of the settlement the contractors had made with the owners. At trial, the architect prevailed, obtaining a summary judgment that under Georgia law, “joint-tortfeasors can no longer assert contribution or non-contractual indemnity claims.” This was reversed by the Court of Appeals, determining that the two were not joint tortfeasors. Mr. Murphy notes that “the court rejected the parties’ attempt to disavow joint and several liability in their respective settlement agreements.” The court ruled that the contractor could proceed with their claims against the argument. Read the court decision
Read the full story...
Reprinted courtesy of

Michigan Finds Coverage for Subcontractor's Faulty Work

August 24, 2020 — Tred R. Eyerly - Insurance Law Hawaii
The Michigan Supreme Court held that under a CGL policy, an "accident" may include unintentional subcontractor work that damages the insured's work product. Skanska USA Building Inc. v. M.A.P. Mechanical Contractors, Inc., et al., 2020 Mich. LEXIS 1194 (Mich. June 29, 2020). Skanska USA Building Inc. was the construction manager on a renovation project for a medical centre. The heatng and cooling portion of the project was subcontracted to M.A.P. Mechanical Contractors, Inc. (MAP). MAP installed a steam builder and piping for the heating system. The installation included several expansion joints. After completion, Skanska learned that MAP had installed some of the expansion joints backward. This caused significant damage to concrete, steel and the heating system. The medical center sent a demand letter to Skanska, who send a demand letter to MAP. Skanska did the repairs and replacement of the damaged property. Skanska then submitted a claim of $1.4 million for its work to Amerisure Insurance Company. The claim was denied. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES