Why Should Businesses Seek Legal Help Early On?
December 03, 2024 —
Scott L. Baker - Los Angeles Litigation BlogMost business owners are natural problem solvers. They assess the issue that lies before them and develop a strategy to overcome it. It’s a critical mindset to have, but do all business owners have the skillset to solve every issue?
While it is understandable that business owners may want to attempt to resolve issues on their own, it is invariably beneficial to obtain guidance for legal issues earlier rather than later.
3 Reasons to Consult an Attorney Sooner than Later
Many people might consider working with an attorney to be a last resort. Typically, this is not the case; rather, getting knowledgeable legal counsel sooner than later can help business owners because:
- It’s Cheaper: Early legal intervention can often prevent disputes from leading to litigation, which can be expensive. Working with an attorney to resolve a conflict before it escalates into a larger issue is often a good business decision and wise investment.
Read the court decisionRead the full story...Reprinted courtesy of
Scott L. Baker, Baker & AssociatesMr. Baker may be contacted at
slb@bakerslaw.com
More Reminders that the Specific Contract Terms Matter
January 24, 2022 —
Christopher G. Hill - Construction Law MusingsIf there is a theme I have pounded upon here at Construction Law Musings in the over 13 years of posting, it is that the specific terms of your construction contracts will make a huge difference. While there have been reminders galore, a case from the Eastern District of Virginia presented another wrinkle on this theme. The wrinkle? A factoring company.
In CJM Financial, Inc. v. Leebcor Services, LLC et. al., the Court examined this scenario (though it went into more detail than I will here): Leebcorp hired a subcontractor, Maston Creek Services to provide certain construction services under two separate contracts. Maston then hired CJM, a factoring company, and assigned CJM its receivables and the right to collect those receivables. We wouldn’t be discussing this case if all had worked out as planned, so you likely anticipate at least some of what came next. The short story is that Matson failed to pay some of its suppliers and Leebcorp exercised its termination rights under those contracts when Matson refused to cure. In the interim, CJM had paid part of certain payment applications to Matson in compliance with the factoring agreement. When Leebcorp failed to pay CJM for Matson’s work, CJM exercised its assigned rights to collect the receivables and sued Leebcorp for breach of contract. In response, Leebcorp counterclaimed for, among other counts including civil conspiracy, breach of contract based on Matson’s failure to perform. CJM moved to dismiss the counterclaims.
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Home Sales Topping $100 Million Smash U.S. Price Records
May 07, 2014 —
Prashant Gopal – BloombergThe U.S. trophy-home market is shattering price records this year as an increasing number of residential properties change hands for more than $100 million.
Barry Rosenstein, founder of hedge fund Jana Partners LLC, has purchased an 18-acre (7.3-hectare) beachfront property in East Hampton, New York, for $147 million, according to the New York Post. That would break the U.S. single-family price record of $120 million set last month with the sale of a Greenwich, Connecticut, waterfront estate on 51 acres. In Los Angeles, a 50,000-square-foot (4,600-square meter) home sold in February for $102 million in cash after a bidding war.
The world’s richest people are moving cash to real estate as they seek havens for their wealth. In the U.S., an improving economy and stocks at a record are bolstering confidence among the affluent. Home purchases of $2 million or more jumped 33 percent in January and February from a year earlier to the highest level for the two-month period in data going back to 1988, according to an analysis by DataQuick.
Read the court decisionRead the full story...Reprinted courtesy of
Prashant Gopal, BloombergMr. Gopal may be contacted at
pgopal2@bloomberg.net
Know Whether Your Course of Business Operations Are Covered Or Excluded By Your Insurance
December 27, 2021 —
David Adelstein - Florida Construction Legal UpdatesIt is a good idea to know what your insurance covers and does not cover. This way, if your course of business has you performing a certain (risky) operation, you know whether that operation is covered or excluded under your policy. If you are not sure, discuss with your insurance broker — this is important. There is little value performing an operation that is NOT covered by your insurance policy, as you are now performing a risk that is not covered by insurance. If you know it is not covered by insurance you may elect to change your operations or see if there is insurance to cover the risk. Below is a case study of this occurrence dealing with a commercial automobile liability policy where an insured’s operations using a crane mounted to a super duty truck was not covered under their automobile liability policy.
In People’s Trust Ins. Co. v. Progressive Express Ins. Co., 46 Fla. L. Weekly D262a (Fla. 3d DCA 2021), homeowners hired a company to install a shed. The company hired another company to deliver and install the shed using a crane; the company used a crane mounted to a Ford F-750 super duty truck. This company improperly operated the crane resulting in the shed falling and damaging the homeowner’s roof. The homeowners submitted a claim to their property insurer and their property insurer subrogated to their rights and sued. The company operating the crane’s commercial automobile liability insurer denied coverage, and thus, denied the duty to defend. As a result, a
Coblentz-type agreement was entered into where the company operating the crane consented to a judgment in favor of the property insurer (subrogee) and assigned its rights under its commercial automobile liability policy to the property insurer. The property insurer then sued the automobile liability carrier for coverage. The trial court granted summary judgment in favor of the automobile liability insurer finding there was no coverage and this was affirmed on appeal. Why?
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
Zoning Hearing Notice Addressed by Georgia Appeals Court
April 20, 2017 —
David R. Cook Jr. - Autry, Hanrahan, Hall & Cook, LLPThe Georgia Court of Appeals recently addressed the requisite notice of zoning proceedings that ultimately requested in a zoning decision. The key question was whether, after a properly noticed planning meeting, additional notice was required before the board’s formal vote that occurred three months later.
Read the court decisionRead the full story...Reprinted courtesy of
David R. Cook, Autry, Hanrahan, Hall & Cook, LLPMr. Cook may be contacted at
cook@ahclaw.com
Seventh Circuit Confirms Additional Insured's Coverage for Alleged Construction Defects
August 10, 2017 —
Tred R. Eyerly - Insurance Law HawaiiThe Seventh Circuit held that the underlying complaint alleged an occurrence by asserting that the painting subcontractor was negligent in causing damage to the building. Westfield Ins. Co. v. Nat'l Decorating Serv., Inc., 2017 U.S. App. LEXIS 12516 (7th Cir. July 13, 2017).
McHugh Construction, the general contractor for construction of a 24 story condominium building in Chicago, retained National Decorating Service, Inc. as a subcontractor to perform all of the painting work. This meant National Decorating would paint the exterior of the building with a protective coating that was a waterproof sealant.
After completion, the building's board of managers sued McHugh, National Decorating, and others for damages resulting from faulty workmanship. The third amended complaint alleged: (1) significant cracking of the exterior concrete walls, interior walls, and ceilings; (2) significant leakage through the exterior concrete walls, balconies, and windows; (3) defects to the common elements of the building; and (4) damage to the interior ceilings, floors, interior painting, drywall, and furniture in the units.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly - Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Form Contracts are Great, but. . .
November 12, 2019 —
Christopher G. Hill - Construction Law MusingsRecently I was discussing the ConsensusDOCs with a colleague and friend and had a revelation. These forms are used often (though somewhat less than their AIA counterparts and less than they should be used). Quick disclaimer: I have been a part of a couple of drafting committees for ConsensusDOCs and am friends with Brian Perlberg, general counsel to the drafting effort.
Some of the reason that these forms are so widely used is that they can be applied in a general way to almost any situation. Both sets of forms have documents for small and large jobs. Both have forms for Contractor/Owner and Contractor/Subcontractor. In short, a form document exists for about any scenario.
I am writing now to let you know that while forms are great, they are just that. . . forms. Like with any set of forms, they need to be “tweaked” for your particular project. In my opinion they both have great clauses in them, and both have some flexibility built in (ConsensusDOCS more at the moment than the AIA forms). At the very least, construction professionals need to use this flexibility to conform the documents to their particular situation and do so within the documents themselves and not with addenda that “strike” or “modify” particular clauses.
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
