Seattle Washington Building Expert Directory

Ahlers, Cressman & Sleight PLLC Ranked Top Washington Law Firm By Construction Executive

July 06, 2020 — Joshua Lane - Ahlers Cressman & Sleight Blog
ACS is proud to announce that in its review of the top 50 national construction law firms, Construction Executive has ranked ACS as the top 23rd national firm, and first among firms with a majority of their attorneys based in Washington. Now in its 18th year of publication, Construction Executive is the leading trade magazine about the business of construction. In its June 2020 issue, CE published a comprehensive ranking of The Top 50 Construction Law Firms™ featuring breakouts and analysis accompanied by an article in which leading legal experts discuss the impact of the COVID-19 pandemic on the construction industry. To determine the 2020 ranking, CE asked hundreds of US law firms with a construction practice to complete a survey. Data collected included: 1) 2019 revenues from the firm’s construction practice; 2) number of attorneys in the firm’s construction practice; 3) percentage of firm’s total revenues derived from its construction practice; 4) number of AEC clients; and 5) the year in which the construction practice was established. The ranking was determined by an algorithm that weighted the aforementioned factors in descending order of importance. Read the court decision
Read the full story...
Reprinted courtesy of Joshua Lane, Ahlers Cressman & Sleight Blog
Mr. Lane may be contacted at joshua.lane@acslawyers.com

Contract Construction Smarts: Helpful Provisions for Dispute Resolution

June 03, 2019 — Christopher G. Hill - Construction Law Musings
For this week’s Guest Post Friday, Musings welcomes back Doug Reiser (@douglasreiser), though from new digs. Doug is a construction attorney, LEED AP and the principal at Reiser Legal LLC in Seattle, WA. His office provides effective construction counsel for businesses in the construction industry. He also runs the Builders Counsel Blog, a blog focused on progressive issues in Washington construction law. Doug is a former partner/member at Wolfe Law Group LLC and former owner and director of Express Lien Inc. There are many types of attorneys out there, but there are certainly two styles: ones looking for the fight and ones trying to prevent the fight. I take the preventative approach. Client funds do not grow on trees. That old saying “an ounce of prevention is worth a pound of cure” should say a “ton of cure.” It’s that valuable. Sometimes the problem for prevention attorneys is trying to relay that message to a construction business. The cost of smart prevention is mainly thought of as just that – a cost. But when it buys you a cure for pennies on the dollar, it’s worth it. You will know it’s worth it when you finally become engaged in a costly three year long legal proceeding over a construction dispute. Read the court decision
Read the full story...
Reprinted courtesy of The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

California Contractor Tests the Bounds of Job Order Contracting

March 01, 2021 — Garret Murai - California Construction Law Blog
Most contractors have heard of design-bid-build, design-build, construction manager at risk, and even public private partnerships, various project delivery methods, which, at their heart, focus on balancing the interests of the various parties involved in a construction project, from owners, to design professionals, to contractors. There’s one project delivery method you may not be as familiar with though: Job Order Contracting, also known by its acronym JOC. JOC contracting is a project delivery method used on public works projects and has been authorized to be used by California K-12 school districts, community colleges, CalState universities, and the Judicial Council of California, which, among other things, is responsible for the construction of California state courts. It is intended to be used on smaller, independent, long-horizon project typically involving maintenance, repair and refurbishment. Think periodic maintenance of facilities. JOC contracts are administered by public entities issuing a request for proposals. The public entity then awards a JOC contract to the lowest responsible bidder. The lowest responsible bidder then enters into a JOC contract with the public entity. JOC contracts typically have a duration of one (1) year and are limited to a total construction value of $4.9 million increased annually based on the Consumer Price Index. When entering into a JOC contract, a JOC contractor agrees to perform work at prices set forth in a Construction Task Catalog also known as a unit price book which includes current local labor, material and equipment costs. Unit prices are then adjusted by a “bid adjustment factor” based on the JOC contractor’s bid. When work is needed, the public entity will then issue a job order to the JOC contractor. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

Subcontractor’s Miller Act Payment Bond Claim

September 07, 2017 — David Adelstein - Florida Construction Legal Updates
Since I wrote my ebook on the application of federal Miller Act payment bonds, I have not discussed a case applying the Miller Act. Until now! Below is a case that reinforces two important points applicable to Miller Act payment bond claims. First, the case reinforces what a claimant needs to prove to establish a Miller Act payment bond claim. Very important. Second, the case reinforces that a subcontractor is going to be governed by its subcontract. This means that those provisions regarding payment and scope of work are very important. Not that you did not already know this, but ignoring contractual requirements will not fly. In U.S.A. f/u/b/o Netplanner Systems, Inc. v. GSC Construction, Inc., 2017 WL 3594261 (E.D.N.C. 2017), a prime contractor hired a subcontractor to run cabling and wiring at Fort Bragg. The subcontractor claimed it was owed a balance and filed a lawsuit against the general contractor the Miller Act payment bond. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Florida Construction Legal Updates
Mr. Adelstein may be contacted at Dadelstein@gmail.com

Withholding Payment or Having Your Payment Withheld Due to Disputes on Other Projects: Know Your Rights to Offset

January 04, 2021 — Christopher C. Broughton, Jones Walker LLP - ConsensusDocs
Introduction The right to offset refers to the common sense ability to reduce or eliminate your payment obligations to a party who owes you money on another contract. With offsets, common law largely tracks common sense. The right of offset is recognized by statute and court decisions in many states as well as under federal law and the U.S. Bankruptcy Code. The right to offset can also be established in the contract or subcontract. But like many things that may seem simple, the right to offset can easily become complex. This article provides an overview of the extent and limits of the right to offset varies from state to state and with federal government contracts about the extent and limits of the right of offset. Construction trust fund statutes add another layer of complications. These variations may not be obvious or intuitive, but they have a tremendous impact on your right to get paid or your right to withhold payment. Because of the variations, you must always confirm the law applicable to your contract or subcontract, which may not be where the project or you are located. Read the court decision
Read the full story...
Reprinted courtesy of Christopher C. Broughton, Jones Walker LLP
Mr. Broughton may be contacted at cbroughton@joneswalker.com

Tokyo Building Flaws May Open Pandora's Box for Asahi Kasei

October 28, 2015 — Kathleen Chu, Joji Mochida & Katsuyo Kuwako – Bloomberg
Japanese real estate investment trusts are joining apartment owners and regulators in pushing Asahi Kasei Corp. for answers on an apartment building sagging sideways on the outskirts of Tokyo, as concerns are mounting that it may not be an isolated case. REITs including Advance Residence Investment, Nippon Accommodation Fund Inc., Daiwa House Residential Investment Corp. and Japan Rental Housing Investment Inc. have all asked Asahi Kasei for details on what other buildings might be flawed, according to the trusts. Asahi Kasei disclosed on Thursday the names of prefectures where the company has undertaken work in the past 10 years on more than 3,000 buildings, after the land ministry requested the data. The sites include 342 schools, 257 medical and health-care facilities, 696 housing complexes and 217 office buildings, the firm said. Asahi Kasei, the subcontractor of the project, said a unit didn’t properly install foundation piles at an apartment building in Yokohama, and the division falsified data on the work. The scandal has sent Asahi Kasei’s shares down more than 21 percent since Oct. 13, when news of the flawed building first emerged. Shares of Sumitomo Mitsui Construction Co., the contractor, plunged 25 percent and those of Mitsui Fudosan Co., which sold units at the Yokohama project in 2006, have tumbled 5 percent since then. All three companies said that the impact of the incident on their earnings is not yet clear. Reprinted courtesy of Bloomberg reporters Kathleen Chu, Joji Mochida and Katsuyo Kuwako Read the court decision
Read the full story...
Reprinted courtesy of

What Does “Mold Resistant” Really Mean?

December 21, 2016 — Duane Craig – Construction Informer
Mold resistant building products offer to reduce the long term risks builders and architects face, but it’s important to know how companies verify their products are truly mold resistant. Here’s the deep story. It may come as a surprise to many but we live in a world that is infested with mold. Some sources put the number of species of mold, or fungi, at three hundred thousand or more. Most of these fungi spend their time doing useful things like breaking down complex substances into simpler compounds. For example the single-celled forms of fungi, called yeast, make bread, beer, and wine possible. Even most of the multi-celled, or hyphae molds, serve the planet by decomposing organic matter so it can be recycled and reused by other life forms on earth. Outdoor Mold Dominates The built environment definitely has its share of mold. But new research has found that most of the mold occurring inside is actually of the outdoor variety. In “The Diversity and Distribution of Fungi on Residential Surfaces” study, Rachel I. Adams and researchers “sampled fungi from three surface types likely to support growth and therefore possible contributors of fungi to indoor air: drains in kitchens and bathrooms, sills beneath condensation-prone windows, and skin of human inhabitants. ” They took the samples at a university housing complex that didn’t have any mold problems. Read the court decision
Read the full story...
Reprinted courtesy of Duane Craig, Construction Informer
Mr. Craig may be contacted at dtcraig@constructioninformer.com

Does the UCC Apply to the Contract for the Sale of Goods and Services

July 03, 2022 — David Adelstein - Florida Construction Legal Updates
What governs the transaction for the hybrid contract that includes both goods and services–the Uniform Commercial Code (UCC) or the common law? A question that is asked in numerous disputes. A good example is the recent case out of the Eleventh Circuit Court of Appeals, Wadley Crushed Stone Company, LLC v. Positive Step, Inc., 2022 WL 1639011 (11th Cir. 2022), dealing with Alabama law. In this case, the plaintiff (buyer) wanted to build a granite plant in Alabama that would process 500 tons of granite per hour. The plaintiff reached out to a defendant company to start the process of building a granite plant. The defendant company engaged vendors and professionals in the due diligence process to determine the equipment the plaintiff would need. After this due diligence, plaintiff and defendant entered into a contract that included equipment and services. Thereafter, the parties modified the contract to reduce the amount for the erection, installation, and electrical work (about $1.5 Million) as plaintiff planned to independently hire the contractor to perform that work. The modified contract was worth $4,059,224.43 of which there were 25 lines items for equipment totaling $3,887,274.43 with the balance (less than 5% of the contract amount) for engineering (done by a third party), installation, setup, and calibration of scales. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES