Seattle Washington Building Expert Directory

What to Expect From the New Self-Retracting Devices Standard

November 29, 2021 — Andre Pelland - Construction Executive
One of the latest and most anticipated changes to occur this year relevant to fall protection is the publishing of the ANSI/ASSP Z359.14 2021 revision. Although the effective date isn’t until August 2022, this change is prompting the need for end user to prepare for using and understanding the new terminology performance requirements that will ultimately alter equipment selection criteria. The reason for its relevance is mostly due to its industry dependence and the increasing popularity of these types of devices. This voluntary consensus standard accounts for a vast portion of the fall protection market equipment and has been adopted as the industry standard, even though it is not the legal requirement. To assure a smooth transition, the immediate priority should be to understand the changes and what it means from a usability standpoint. A clear understanding of what changes devices need to comply will allow users to proceed with a comprehensive transition plan. What Are the Most Relevant Changes for the User? Classes The most significant changes are for Class A and B devices used to designate arrest distances and forces and the introduction of the Class 1 and 2 devices. These classes were known as designators for arresting falls at 24 inches and under with higher forces (Class A), and 54 inches and under with lower forces (Class B). Class 1 devices allow anchoring on overhead anchorages only and limitg freefall to no more than two feet. Reprinted courtesy of Andre Pelland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Pelland may be contacted at andre.pelland@puresafetygroup.com

Insurers Subrogating in Arkansas Must Expend Energy to Prove That Their Insureds Have Been Made Whole

July 30, 2019 — Michael J. Ciamaichelo - The Subrogation Strategist
Arkansas employs the “made whole” doctrine, which requires an insured to be fully compensated for damages (i.e., to be “made whole”) before the insurer is entitled to recover in subrogation.[1] As the Riley court established, an insurer cannot unilaterally determine that its insured has been made whole (in order to establish a right of subrogation). Rather, in Arkansas, an insurer must establish that the insured has been made whole in one of two ways. First, the insurer and insured can reach an agreement that the insured has been made whole. Second, if the insurer and insured disagree on the issue, the insurer can ask a court to make a legal determination that the insured has been made whole.[2] If an insured has been made whole, the insurer is the real party in interest and must file the subrogation action in its own name.[3] However, when both the insured and an insurer have claims against the same tortfeasor (i.e., when there are both uninsured damages and subrogation damages), the insured is the real party in interest.[4] In EMC Ins. Cos. v. Entergy Ark., Inc., 2019 U.S. App. LEXIS 14251 (8th Cir. May 14, 2019), EMC Insurance Companies (EMC) filed a subrogation action in the District Court for the Western District of Arkansas alleging that its insureds’ home was damaged by a fire caused by an electric company’s equipment. EMC never obtained an agreement from the insureds or a judicial determination that its insureds had been made whole. In addition, EMC did not allege in the complaint that its insureds had been made whole and did not present any evidence or testimony at trial that its insureds had been made whole. After EMC presented its case-in-chief, the District Court ruled that EMC lacked standing to pursue its subrogation claim because “EMC failed to obtain a legal determination that its insureds had been made whole . . . prior to initiating this subrogation action.” Thus, the District Court granted Entergy Ark., Inc.’s motion for judgment as a matter of law and EMC appealed the decision. Read the court decision
Read the full story...
Reprinted courtesy of Michael J. Ciamaichelo, White and Williams LLP
Mr. Ciamaichelo may be contacted at ciamaichelom@whiteandwilliams.com

Important Insurance Alert for Out-of-State Contractors Assisting in Florida Recovery Efforts!

November 01, 2022 — Richard W. Brown & Stephanie A. Giagnorio - Saxe Doernberger & Vita
Significant portions of Florida suffered extensive damage from Hurricane Ian. Many out-of-state contractors have sent their workers to Florida to help with the cleanup and rebuilding process. SDV is sending out this important notice for all out-of-state contractors to contact their workers’ compensation brokers and insurers to ensure their out-of-state workers’ compensation policy will cover workers in Florida. The state of Florida does not recognize the “All States Endorsement” on workers’ compensation policies, and in some instances could potentially result in out-of-state contractors being without coverage in the State of Florida. As per the Florida Division of Workers’ Compensation: “Out of State Employers must notify their insurance carrier that they are working in Florida. If there is no insurance, the out-of-state employer is required to obtain a Florida Workers’ Compensation Insurance policy with a Florida approved insurance carrier which meets the requirements of Florida law and the Florida Insurance Code. This means that ‘Florida’ must be specifically listed in Section 3A of the policy (on the Information Page).” Reprinted courtesy of Richard W. Brown, Saxe Doernberger & Vita and Stephanie A. Giagnorio, Saxe Doernberger & Vita Mr. Brown may be contacted at RBrown@sdvlaw.com Ms. Giagnorio may be contacted at SGiagnorio@sdvlaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Will Superusers Future-Proof the AEC Industry?

May 13, 2019 — Aarni Heiskanen - AEC Business
Design professionals who leverage tools and technology and, at the same time, have people skills, are essential to the future of the industry. They are Superusers, the protagonists of the latest book by Randy Deutsch. Randy Deutsch is an architect, educator, workshop leader, writer, and international keynote speaker. I had a chance to interview him about his book, Superusers: Design Technology Specialists and the Future of Practice. First, I was curious to know why he chose this topic for his fourth book. He explains: “Right now, it made a lot of sense to focus on the individual, not focus on collaboration and building teams, and really define what each individual team member should be.” Who Are Superusers? IT, technology, and tool specialists are typically experts in a relatively narrow field. Designers, especially architects, must have a wider perspective. Superusers are design technologists; liaisons between business needs and technology solutions. They demonstrate certain skillsets and mindsets. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

White and Williams Announces the Election of Five Lawyers to the Partnership and the Promotion of Five Associates to Counsel

February 16, 2016 — White and Williams LLP
White and Williams is proud to announce that Meredith Bieber, Eric Hermanson, Timothy Martin, Brian Tetro and Debra Weinrich have been elected to the partnership. The firm has also promoted Alan Charkey, Michael DiFebbo, William Doerler, Justin Fortescue and Stephen Milewski from associate to counsel. The newly elected partners and promoted counsel represent the wide array of practices that White and Williams offers its clients, including construction, finance, healthcare, insurance coverage, product liability, real estate, reinsurance, and subrogation. These accomplished lawyers have earned this elevation based on their contributions to the firm and their practices. “We are delighted to elect these five lawyers to the partnership and promote five exceptional associates to counsel. Those included in these promotions represent the breadth of services and the deep bench that we have to offer at White and Williams,” said Patti Santelle, Managing Partner of the firm. “The election of our new partners and promotion of our new counsel is a reflection of their success and dedication as well as the continued health of the firm.” Read the court decision
Read the full story...
Reprinted courtesy of White and Williams LLP

Several Wilke Fleury Attorneys Featured in Sacramento Magazine 2022 Top Lawyers!

October 03, 2022 — Wilke Fleury LLP
Wilke Fleury is extremely proud of its incredibly talented attorneys! Congratulations to Steve Williamson, Dan Egan, Neal Lutterman, Danny Foster, George Guthrie, Mike Polis, Ron Lamb, and David Frenznick, who are all featured in this year’s Sacramento Magazine’s List of Top Lawyers 2022! Reprinted courtesy of Wilke Fleury LLP Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

UPDATE: Texas Federal Court Permanently Enjoins U.S. Department of Labor “Persuader Rule” Requiring Law Firms and Other Consultants to Disclose Work Performed for Employers on Union Organization Efforts

December 08, 2016 — Aaron C. Schlesinger & Gregory R. Begg – Peckar & Abramson, P.C.
As an update to our prior alert, on November 16, 2016, a federal judge in Texas issued a permanent injunction blocking the U.S. Department of Labor’s (“DOL”) “persuader rule” – a preliminary injunction had been granted this past June. In rendering the permanent injunction, the court adopted the reasoning of its prior June 27, 2016 decision that granted a nationwide preliminary injunction on the rule. In the earlier decision, the court held that a temporary injunction was appropriate because the parties challenging the rule were likely to succeed on the merits of their claim […]. Reprinted courtesy of Aaron C. Schlesinger, Peckar & Abramson, P.C. and Gregory R. Begg, Peckar & Abramson, P.C. Mr. Schlesinger may be contacted at aschlesinger@pecklaw.com Mr. Begg may be contacted at gbegg@pecklaw.com Read the court decision
Read the full story...
Reprinted courtesy of

AI AEC Show: Augmenta Gives Designers Superpowers

December 31, 2024 — Aarni Heiskanen - AEC Business
In this episode of the AI AEC Show, host Aarni Heiskanen interviews Aaron Szymanski and Francesco Iorio, the visionary founders of Augmenta, to explore how generative AI is revolutionizing design. Augmenta’s platform gives designers superpowers by automating complex workflows, doubling productivity, and enabling better, faster decision-making. Discover the fascinating origin story of Augmenta, born from the intersection of industrial design frustration and cutting-edge AI research. Aaron and Francesco share how their backgrounds in manufacturing, design, and technology led them to tackle inefficiencies in the construction industry—starting with electrical raceway design. They reveal how their AI-powered tools save time and optimize designs for cost, sustainability, and constructability. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES