Flying Solo: How it Helps My Construction Clients
February 18, 2015 —
Christopher G. Hill – Construction Law MusingsTwo and a half years ago, on July 1, 2010, I opened my solo practice. At the time, I really had no insight into how big this change would be from a positive, customer service, perspective.
When I made the decision to go solo with my construction law practice, I knew I wanted to have flexibility to serve my client base of contractors and subcontractors in Virginia. I started some flat rate billing and had the ability to take cases that were below the dollar value of those that my old firm was willing to take. I also knew that I would be a master of my own destiny for better or worse (and it has been much more of the former than the latter).
What I did not realize is the impact that owning my own business would have on my perspective. I have always believed that, in most cases where construction disputes occur, mediation is a great option. However mediation only occurs with conflict. For any business, whether construction or otherwise, conflict creates expenses that were not likely to have been anticipated or built in to the budget. Litigation is not something that most businesses can, or should, build into their operating budgets.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, Law Office of Christopher G. Hill, PCMr. Hill may be contacted at
chrisghill@constructionlawva.com
Indiana Court Enforces Contract Provisions rather than Construction Drawing Markings
January 14, 2015 —
Beverley BevenFlorez-CDJ STAFFTimothy J. Abeska, a vice-chair of Barnes & Thornburg LLP’s Construction Law Practice Group, analyzed Goodrich Quality Theaters, Inc. v. Fostcorp Heating and Cooling, Inc., 16 N.E.3d 426 (Ind. Ct. App. 2014), which “provides an example of a court enforcing contract provisions rather than markings on construction drawings that are inconsistent with contract requirements.”
The case evolved from a dispute on a construction of an IMAX theater, when the general contractor did not understand the architect’s markings for non-standard joist girders, and ordered standard joist girders, per the contract. The error created delays and other problems, which led to payment disputes and mechanic’s liens against the project.
Abeska stated that “[t]his case shows the importance of making sure all documents which comprise a construction contract are consistent with each other, as courts will enforce contracts negotiated by the parties. The case also demonstrates that litigation is not a quick process, as the Court of Appeals Opinion was issued more than seven years after the project was completed.”
Read the court decisionRead the full story...Reprinted courtesy of
How to Determine the Deadline for Recording a California Mechanics Lien
September 17, 2015 —
William L. Porter, Esq. – Porter Law Group BulletinThe California Mechanics Lien is one of the most valuable collection devices available to contractors, subcontractors and suppliers who are unpaid for work performed and materials supplied in relation to a California private works construction project. The mechanics lien allows the claimant to sell the property where the work was performed in order to obtain payment. As noted below, in order to pursue this remedy, certain deadlines must be met.
Know Your Mechanics Lien Filing Deadlines Generally
Working within deadlines is absolutely crucial to preserving mechanics lien rights under California law. The deadlines differ, depending on whether you are a ”direct” contractor, also known as “original” or “prime” contractor (one who contracts directly with the property owner) or a subcontractor or material supplier. The primary differences are that the direct contractor is only required to serve the “Preliminary Notice” on the Construction Lender (Civil Code section 8200-8216), whereas the subcontractor and material supplier must serve not only the Construction Lender, but also the Owner and Direct Contractor (see Civil Code section 8200(e)). Another difference is that a direct contractor has a longer period of time in which to record a mechanics lien after a valid “notice of completion” or a “notice of cessation” has been recorded (Civil Code sections 8180-8190), (60 days for original contractors as compared to 30 days for subcontractors and suppliers – See Civil Code sections 8412 and 8414).
Read the court decisionRead the full story...Reprinted courtesy of
William L. Porter, The Porter Law GroupMr. Porter may be contacted at
bporter@porterlaw.com
How to Protect a Construction-Related Invention
May 10, 2021 —
Patrick Barthet - Construction ExecutiveThey say necessity is mother of invention. That was surely true for Johan Vaaler, who in 1899 decided he was tired of having to sew pages together to keep them organized. Voila, enter the paper clip. This wasn’t the case for Percy Spencer. He was a radar tube designer working at Raytheon who, while working in front of an active radar set, noticed the candy bar in his pocket started to melt. Exploring the phenomenon further, he placed corn kernels in front of the radar and behold, he ended up with the world’s first microwaved popcorn. He patented the microwave oven in 1945.
Whether by necessity or by accident, what should contractors do if they develop a unique tool to accomplish some portion of their work faster, easier or less expensively? How do they protect it from misappropriation by competitors, or by an errant employee? We are all familiar with the fact that in today’s internet-driven market, it has become very easy to reverse engineer and knock off an innovative product.
The best way to safeguard an invention is, of course, to register it with the appropriate government agency:the United States Patent and Trademark Office (USPTO). Generally done with the assistance of a patent lawyer, the process is neither inexpensive or abbreviated. It could cost several thousand dollars and take 12 to 18 months. But, more importantly, this is not sufficient. Inventors must regularly monitor their patents to police possible infringers. Many folks think the USPTO does this, but it does not.
Reprinted courtesy of
Patrick Barthet, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Barthet may be contacted at
pbarthet@barthet.com
LEEDigation: A Different Take
June 22, 2020 —
Christopher G. Hill - Construction Law MusingsThis weeks Guest Post Friday at Musings is a real treat. Sara Sweeney is a registered architect, LEED AP and GreenFaith Fellow in religious environmental leadership. Her 18-year architectural career reflects her passion and commitment to sustainable building design and stewardship of our natural environment. She is the founder of EcoVision LLC, a solutions-based research and consulting firm, grounded in sustainable design practices, environmental stewardship, and building science.
Dude
Every so often I come across a word that drives me nuts. A few years ago it was ‘Dude.’ Lately, it is ‘LEEDigation.’ It’s a new term to “describe green building litigation” coined by Chris Cheatham, a fine person and very knowledgeable attorney in construction law and a LEED AP as well. Per his definition, LEEDigation “could involve disputes arising from green building certification, could arise if a project fails to obtain government incentives or satisfy mandates for green building construction, or could simply result from improperly designed or constructed green building strategies. It all makes sense. So why does it drive me nuts?
Round Peg. Square Hole.
Although I fully understand why the term was coined, such a term keeps us in flat world, that is, the world of conventional design and construction. Designing and building to LEED standards, or rather, just designing and building sustainably in general, whether to meet a third party standard or not, is a different way than what we have been used to. Period. Whereas our conventional way is focused on first costs, and sees the building more as a commodity than the human imprint and legacy on Earth, sustainable design and building is a process which, at its best, considers the economic impacts of NOT building responsibly. It is a more holistic way of building and balances long-term costs and implications with short term costs.
Read the court decisionRead the full story...Reprinted courtesy of
The Law Office of Christopher G. HillMr. Eyerly may be contacted at
te@hawaiilawyer.com
Examining Construction Defect as Occurrence in Recent Case Law and Litigation
February 05, 2014 —
Beverley BevenFlorez-CDJ STAFFIn Lexology, Stephen M. Prignano and Nora A. Valenza-Frost of Edwards Wildman Palmer LLP examined recent case law and litigation to discuss whether or not construction defects are construed as an occurrence in the current legal climate.
Prignano and Valenza-Frost stated, “The determination of whether there is coverage under a CGL policy for a construction defect claim requires an insurer to carefully examine the law of the relevant jurisdiction. Courts and legislatures continue to reach different conclusions respecting coverage, and some states have a more well-developed body of law on these issues than others.”
Read the court decisionRead the full story...Reprinted courtesy of
Judicial Panel Denies Nationwide Consolidation of COVID-19 Business Interruption Cases
October 05, 2020 —
Tred R. Eyerly - Insurance Law HawaiiThe Judicial Panel on Multidistrict Litigation denied motions to centralize pretrial proceedings in pending COVID-19 business interruption claims. In re COVID-19 Business interruption Protection Insurance Litigation, 2020 U.S. District. LEXIS 144446 (Aug. 12, 2020).
Plaintiff policy holders sought consolidation, contending their policies provided coverage for business interruption losses caused by the COVID-19 pandemic and the related government orders suspending, or severely curtailing, operations of non-essential businesses. The Panel considered 15 actions on the pending motions, but had notice of 263 related actions.
Some plaintiffs opposed centralization or sought to be excluded from any MDL. Some argued the Panel should centralize the coverage actions on a state-by-state, regional, or insurer-by-insurer basis.
The Panel did not accept consolidation of all cases. There was little potential for common discovery across the litigation because there was no common defendant as the actions involved either a single insurer or insurer-group. The various cases involved different insurance policies with different coverages, conditions, exclusions, and policy language, purchased by different businesses in different industries located in different states.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
Tightest Credit Market in 16 Years Rejects Bernanke’s Bid
October 08, 2014 —
Prashant Gopal – BloombergJames Bregenzer, a 31-year-old marketing strategist in Chicago, was rejected for a mortgage in May after successfully financing two previous home purchases. The hitch this time: his monthly payment would have been $100 more than the lender was willing to approve.
Bregenzer is in good company. Standards in the U.S. are so high and inflexible that former Federal Reserve Chairman Ben S. Bernanke, now a Brookings Institute fellow-in-residence with a net worth of at least $1.1 million, said at a conference last week that he couldn’t refinance his house in Washington. Even some doctors struggle to get home loans if they’re self-employed.
“We asked if we could go over by $100 and were told that’s just not going to work,” said Bregenzer, who bought his first home before getting married in 2008. “The process of buying a home used to be stupid easy. Now, my wife and I were buying a home with two salaries, we make a heck of a lot more than I used to, and I have to go into great and terrible detail to show documentation.”
Read the court decisionRead the full story...Reprinted courtesy of
Prashant Gopal, BloombergMr. Gopal may be contacted at
pgopal2@bloomberg.net
