Seattle Washington Building Expert Directory

New York Construction Practice Team Obtains Summary Judgment and Dismissal of Labor Law Claims

October 01, 2024 — Lewis Brisbois Newsroom
New York, N.Y. (August 23, 2024) – In Trujillo-Cruz v. City of New York, et al., New York Partner Inderjit Dhami, a member of New York Partner Meghan A. Cavalieri’s Construction Practice Team, recently obtained summary judgment and dismissal of the plaintiff's Labor Law §240(1), §241(6) and §200 claims dismissing the entire case against national developer and construction company clients. The plaintiff alleged to have sustained injuries as the result of a construction site accident occurring on July 11, 2018, while in the scope of his employment as a laborer in connection with the construction/renovation of a residential apartment building in Brooklyn, New York. Specifically, the plaintiff alleged that he was injured when he was coming down from a ladder and fell on a 2”x 4”, causing him disabling injuries. The plaintiffs’ counsel articulated a $3 million settlement demand. Labor Law §240(1) imposes absolute liability on a defendant where an injured worker engaged in the performance of covered construction work establishes that a safety device proved inadequate to shield him from elevation-related harm, and that the defendant’s failure to provide an adequate safety device proximately caused the injuries alleged. The plaintiff first testified that he stepped on the 2” x 4” after he came down off of the ladder, but his counsel then prompted him to recalibrate his testimony by asking whether the accident arose when he was coming down the ladder or after he had come down off of the ladder. The plaintiff changed his testimony, alleging that the accident arose as he was coming down the ladder and that he remained partially on the ladder when he stepped on the piece of formwork and fell. Inderjit argued that the plaintiff’s reframing of his deposition testimony was immaterial for purposes of the Labor Law § 240 (1) analysis. Irrespective of whether the plaintiff was on solid ground or had one foot on the ladder at the time of the occurrence, his Labor Law § 240 (1) claim was unavailing in that the accident did not arise as a result of the type of extraordinary elevation-related peril protected by Labor Law § 240 (1). Justice Maslow agreed and dismissed the plaintiff’s Labor Law § 240 (1) claims. Read the court decision
Read the full story...
Reprinted courtesy of Lewis Brisbois

Traub Lieberman Attorneys Recognized as 2020 Super Lawyers and Rising Stars

November 16, 2020 — Traub Lieberman
Traub Lieberman is pleased to announce that Super Lawyers has named nineteen of our attorneys as 2020 Super Lawyers and Rising Stars. Super Lawyers selects attorneys using a multiphase selection process in which nominations and evaluations are combined with independent research. Each candidate is evaluated on 12 indicators of peer recognition and professional achievement. Selections are made on an annual, state-by-state basis. The objective is to create a credible, comprehensive and diverse listing of outstanding attorneys that can be used as a resource for attorneys and consumers searching for legal counsel. The Super Lawyers designation recognizes the top 5% of attorneys in the U.S. and the Rising Stars designation recognizes the top 2.5% of attorneys in the U.S. under the age of forty, as chosen by their peers and through independent research within their practice area. Read the court decision
Read the full story...
Reprinted courtesy of Traub Lieberman

Supplement to New California Construction Laws for 2019

January 08, 2019 — Daniel F. McLennon - Smith Currie
A representative of the Contractors State License Board would like to emphasize a benefit of SB 1042 not mentioned in the report below that Smith Currie published recently. Importantly, the new law allows the CSLB to work with licensees, resolve complaints informally, and avoid a full Administrative Procedure Act hearing brought by the California Attorney General’s office. If the CSLB and licensee are unable to resolve a citation informally, the licensee is still entitled to the APA hearing. Contractors receiving CSLB citations are wise to avail themselves of this process. Read the court decision
Read the full story...
Reprinted courtesy of Daniel F. McLennon, Smith Currie
Mr. McLennon may be contacted at dfmclennon@smithcurrie.com

Lessons Learned from Implementing Infrastructure BIM in Helsinki

February 07, 2018 — Aarni Heiskanen – AEC Business Blog
Finland’s capital is currently experiencing a construction boom. Old industrial citadels are turning into residential areas with new commercial centers. Consequently, Helsinki needs to build new infrastructure. To improve the efficiency and quality of infrastructure construction, the city has started using BIM, and is now learning how to get the most value from it. Ville Alajoki, Team Leader in Helsinki’s Urban Development Division, is a keen proponent of BIM. “Infrastructure construction is still in its early stages when it comes to using BIM. For the most part, BIM implementation has not been systematic in our city yet. We tend to use it in our own structural design and often in building construction. However, in infrastructure project management, its active individuals who have set the pace,” Ville admits. He believes that the city’s strategy for 2017–2021 will spur the use of new technologies, including BIM. “Helsinki aims to be the city in the world that makes the best use of digitalization,” Mayor Jan Vapaavuori has declared. A good start, but there’s room for improvement. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business Blog
Mr. Heiskanen may be contacted at info@aepartners.fi

Deadlines Count for Construction Defects in Florida

November 06, 2013 — CDJ STAFF
Scott Kiernan, an attorney in the Orlando offices of Becker & Poliakoff, writing on their Florida Construction Law Authority site notes that “nothing lasts forever, especially the right to sue for building defects.” Under Florida law, according to Mr. Kiernan, the time in which a condominium association can file a construction defect is “only 4 years from the time that the Condominium Association knew or should have known of the defect(s).” However, for defects that aren’t even discovered during those first four years, there is a ten-year period where claims for latent defects can become the subject of a construction defect claim. Read the court decision
Read the full story...
Reprinted courtesy of

Harmon Tower Opponents to Try Mediation

June 28, 2013 — CDJ STAFF
There are plenty of issues on the table in the fight between CityCenter and Tutor Perini over the Harmon Tower project in Las Vegas. Some of them might be solved at a mediator’s table instead of reaching the courtroom. Both sides will be participating in a six-day negotiation with an outside mediator. Their hope is that the projected two-year jury trial can be reduced to only one year. The judge in the case remains skeptical. “It ain’t happening. I know you all,” was Clark County District Judge Elizabeth’s Gonzalez’s comment. Read the court decision
Read the full story...
Reprinted courtesy of

The Rise of Modular Construction – Impacts for Consideration

December 04, 2023 — Chad V. Theriot - ConsensusDocs
Modular construction is not new. However, over the last several years, modular construction has seen significant growth with no signs of slowing down. In 2021, global modular construction represented a market of approximately $130 billion and is projected to reach upwards of $235 billion by 2031. Modular construction growth in the US is largely due to the technological advances and globalization. In general, modular construction involves the manufacturing and fabrication of standardized components of a structure in an off-site, controlled environment. Once those components are fabricated, they are then transported to the project site and assembled by an installer or contractor. Moving these fabrication and construction activities off-site allows the fabricator to control the quality standards over the fabrication process and gain the economic advantage of an assembly line and manufacturing process. This leads to a reduction in cost. This cost savings is then passed on to the owner, thereby driving down the overall price of construction. Read the court decision
Read the full story...
Reprinted courtesy of Chad V. Theriot, Jones Walker (ConsensusDocs)
Mr. Theriot may be contacted at ctheriot@joneswalker.com

The Living Makes Buildings Better with Computational Design

November 12, 2019 — Aarni Heiskanen - AEC Business
The AEC industry has a responsibility and mandate when it comes to addressing significant global challenges in the sector and improving operational practice. Professionals such as Lorenzo Villaggi, Senior Research Scientist at The Living, believe that new design technologies hold the key to better-performing built environments. “Although I’m trained as an architect, I’ve always had an interest in how technology can interact with and have an impact on design processes,” says Lorenzo. “I’ve developed a familiarity with advanced computational tools and eventually developed my own.” These computational tools are primarily designed to assist with the generation of design options and improve performance analysis. They range from small systems that help users design faster, all the way to elaborate software that can perform complex, mission-critical tasks. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES