Cambridge Massachusetts Building Expert Directory

3D Printing: A New Era in Concrete Construction

April 11, 2022 — Zoey Zhao - Construction Executive
The construction of buildings using concrete has been around since the time of the Romans. In all those centuries, concrete structures have been built using essentially the same method: forms, reinforcement, mixing, pouring, setting, repeat. The process is costly and time-consuming. The construction of the forms alone demands dozens of workers and requires a substantial amount of lumber, keeping labor and materials costs high. Builders might save some time using prefabricated concrete blocks, but such materials are not appropriate for every construction project and carry their own expenses. For the first time in history, builders have an alternative to traditional concrete construction methods that are more cost-effective, less expensive, more environmentally friendly and allow for a wide range of possible construction projects. Three-dimensional concrete printing for construction has emerged in the building field as a viable and efficient alternative. Reprinted courtesy of Zoey Zhao, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Ms. Zhao may be contacted at zoey@aictbuild.com

Comparative Breach of Contract – The New Benefit of the Bargain in Construction?

October 26, 2020 — Steven Hoffman - Florida Construction Law News
Ask most Florida Construction Law practitioners, and you will likely hear that liability may not be apportioned in “pure” breach of contract cases via the Comparative Fault Act, section 768.81, Florida Statutes (the “Act”). If a material breach is a “substantial factor” in causing damages, the breaching party must answer for all damages that were reasonably contemplated by the parties when they formed the contract. Claimants argue that matters of contract should be governed strictly by the agreement, and risk can be controlled by negotiated terms, including waivers and limitations. Defendants complain that construction projects are collaborative, multi-party affairs, and strict application of contract principles leads to harsh results for relatively minor comparative fault for the same or overlapping damages. The notion of apportioning purely economic loss contract damages based on comparative fault is not new. Since April 2006, Florida has been a “pure” comparative fault jurisdiction with limited exceptions. Prior to the amendment, tort liability for non-economic damages was purely comparative, but liability for economic damages was typically a combination of joint and several liability with an additional exposure based on comparative fault. Read the court decision
Read the full story...
Reprinted courtesy of Steven Hoffman, Cole, Scott & Kissane
Mr. Hoffman may be contacted at Steven.Hoffman@csklegal.com

Six Reasons to Use Regular UAV Surveys on Every Construction Project

October 14, 2019 — Dustin Price - Construction Executive
UAVs are the future of the construction industry. From accurate 3D modeling simulations to regular safety and maintenance checks, UAVs can improve construction projects in many ways—and the value and applications for UAVs is consistently growing. Drones are agile, cost-effective and safe. Here are some reasons why UAV surveys should be part of any construction project. 1. UAV scans are much faster than human inspections Drones can cover large territory much faster than human inspectors can. They can also be used over more difficult terrain, and they can survey areas that are otherwise inaccessible. A drone survey can be completed in a day; not only does this mean that the territory is well-surveyed each time, but it also means surveys can be done more frequently. Construction projects need to be inspected regularly and on time if the project is to meet its deadlines. Delayed construction projects can cost a company millions of dollars, as construction projects need to be completed stage by stage, usually on a strict timeline. Drones will improve the consistency of the project and, in turn, this will improve the reputation of the company itself. Reprinted courtesy of Dustin Price, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

California’s Prompt Payment Laws: Just Because an Owner Has Changed Course Doesn’t Mean It’s Changed Course on Previous Payments

April 20, 2016 — Garret Murai – California Construction Law Blog
We’ve written before about California’s prompt payment laws which are designed to help contractors get paid in a timely and orderly fashion, which is always nice, right? California’s prompt payment laws require that project owners pay their direct contractors, who are in turn required to pay their subcontractors who are in turn required to pay their sub-subcontractors and so on within certain statutorily set deadlines, or be subject to prompt payment penalties nearly as high as the interest you pay on your credit cards. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Wendel Rosen Black & Dean LLP
Mr. Murai may be contacted at gmurai@wendel.com

Real Estate & Construction News Round-Up (02/08/23) – The Build America, Buy America Act, ESG Feasibility, and University Partnerships

February 27, 2023 — Pillsbury's Construction & Real Estate Law Team - Gravel2Gavel Construction & Real Estate Law Blog
This week’s round-up explores President Joe Biden’s recent State of the Union address and plans for the Build America, Buy America Act, the feasibility of real estate companies achieving their ESG goals, and how developers, lenders, and tenants are partnering with universities to solve real estate challenges.

During his annual State of the Union address, President Joe Biden detailed his Build America, Buy America plans and standard to require all construction materials on federal infrastructure projects to be made in the United States. (Jennifer Goodman & Zachary Phillips, Construction Dive)
Speculation surrounding the economic environment and real estate stability is testing the feasibility and resilience of the environmental, social and corporate governance (ESG) framework used by corporations to measure their societal impact. (Anna Staropoli, Commercial Observer)
Adopting Web3 and decentralization in the real estate industry is projected to bring about significant changes and improvements. (David Bitton, Forbes)

Read the court decision
Read the full story...
Reprinted courtesy of Pillsbury's Construction & Real Estate Law Team

Construction Defect Disputes: Know Your Measure of Damages!!!!!

January 21, 2025 — David Adelstein - Florida Construction Legal Updates
Remember this: know your measure of damages in a construction defect dispute. If you don’t, as shown below, the outcome can be unforgiving. The measure of damages is one of your most important elements of proof. You are filing suit for damages; thus, knowing what you can reasonably recovery is paramount. In a recent dispute, Bandklayder Development, LLC v. Sabga, 50 Fla.L.Weekly D91e (Fla. 3d DCA 2025), a residential developer sold a single-family house while it was under construction in an as-is purchase agreement. Post-closing, the purchasers claimed defects and served a Florida Statutes Chapter 558 notice of construction defects letter. The purchaser subsequently initiated a construction defect lawsuit. During the nonjury trial, the purchaser’s expert testified that the purchasers suffered damages approximating $323,000 calculated as of January 19, 2022 (which was the date of the expert’s report). The expert further testified that the cost to finish the incomplete/defective work increased by 35% at the date of the May 2023 trial. However, the expert never testified as to the amount of damages as of the date of the contractual breach, which at the latest, would have been in April 2018 when the notice of construction defects letter was sent (or, at its earliest, June 2017 when closing occurred). At trial, the judge entered judgment for the purchasers in the amount of about $425,0000. This was reversed on appeal with judgment to be entered in favor of the developer. Why? Because the purchasers employed the wrong measure of damages and the only thing that prevented them from introducing the right measure of damages was within their control. Harsh outcome for not applying the correct measure of damages! Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

The Power of Planning: Four Key Themes for Mitigating Risk in Construction

November 09, 2020 — Zac Hays - Construction Executive
Construction is, and always has been, known as a relatively risky business. Whether it is dealing with factors that can be controlled or beyond control, proactively managing risk has proven to be of the most critical factors in delivering quality projects faster, more efficiently and with wider margins. Many people assume on-site activities introduce the greatest amount of uncertainty and potential risk. But many mistakes in construction originate in the planning phase – meaning preconstruction is ripe with opportunity to be the most effective place for mitigating risk, saving money and ultimately broadening margins. There are many ways to mitigate risk before projects even start, but four key themes emerge to be clear, repeatable opportunities for success. DIGITIZE THE PLANNING PHASE Preconstruction is where ideas are brought to life by translating architectural designs into a real, constructible plan. Decisions made at this stage can determine the project’s success and profitability – but it’s far from straightforward. Estimating, scheduling and planning are highly complex activities that depend on constantly changing details and are all areas where missed information or miscommunication can lead to costly rework down the line. Reprinted courtesy of Zac Hays, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Eliminating Waste in Construction – An Interview with Turner Burton

June 29, 2020 — Aarni Heiskanen - AEC Business
I had the pleasure of interviewing Turner Burton, President of Hoar Construction. We discussed waste in construction and how his company is on a mission to eliminate it. Can you say a few words about yourself and your company? I grew up around construction and this company, hearing about the business from both my grandfather and my father. I started working on job sites in high school forming concrete, continued working on projects throughout college, and since graduating from college, I’ve taken on different roles in the company to ensure I understand all aspects of the business. Hoar Construction was founded 80 years ago, and throughout our history, we’ve been committed to learning from every project to improve our processes and deliver the best building experience possible for our clients and partners. But it’s the relentless pursuit of improvement that really sets us apart as builders – to always strive to be the best and do the right thing for our customers and partners. There’s something to be said for setting a goal that you’ll always be working toward. It fosters hard work, collaboration, and productive effort. If we’re always working to find a better way, then we will always be improving. That effort drives better results for our owners and everyone we work with. Essentially, we’re always working toward something. Always improving. Always in process. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES