Steps to Defending against Construction Defect Lawsuits
July 21, 2011 —
CDJ STAFFWriting in Claims Journal, Bryan Rendzio notes that the decline in construction has not been matched by a decline in construction defect lawsuits over condominiums. He reviews the ways in which lawyers representing developers can help protect their clients. He identifies four important considerations in defending developers from claims of construction defects.
He advocates a careful review of the contract. “Under a breach of contract claim, the insured’s duties to the party who brought the claim against the insured flow from the contract. Commonly, construction contracts limit the scope of recoverable damages, such as by waiving consequential damages.’
The next step, according to Rendzio is to check of a settlement agreement is already in place, noting that these are “a familiar occurrence in the construction industry, regardless of any lawsuits having been filed.”
He considers the statute of repose “the single-most decisive weapon an insured possesses in its arsenal during a condo defect lawsuit.” He notes that no lawsuits can be brought for construction defects after the end specified by the statute of repose, and if a lawsuit is brought beforehand, no additional parties can be named once the statute has taken effect.
Finally, he warns adjusters to be suspicious when a condo association requests contractual indemnification. He notes that the pitfall in this is that developers and the subsequent condominium association often have similar names, given the theoretical example of a condo project built by “Fake Lakes LLC” and later run by the “Fake Lakes Condominium Association.” Writing in regards to Florida law, he notes that condominium associations do not have successor interest in contracts developers made with contractors.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
How is Negotiating a Construction Contract Like Buying a Car?
January 04, 2018 —
Christopher G. Hill - Construction Law MusingsOriginally Published by CDJ on March 1, 2017
I know, you’re probably looking for a punchline, and likely thinking something along the lines of “only a construction attorney would be sitting in his office and come up with such an analogy,” but I really do think it’s a good one.
When you are buying a car, you look for priorities. Is the color what you want? Is the motor a hybrid or a v-6? Does it have Android Auto? What is the fuel mileage? All of these things may be more or less important to you. If you can get your priorities for a price that is attractive, you will likely let some other less important items, e. g. trunk space or rear seat leg room, slide and purchase the car anyway. Furthermore, you may use these minor items as negotiating points to either get one of the priorities or a lower price. Of course the dealership will want to get its priorities, likely a sale and a profit, when negotiating and will have certain items that it won’t move on just as you have terms that you won’t move on.
Much like when you walk onto the car lot, and particularly as a subcontractor looking at a contract from a general contractor, or a GC looking at the contract from the owner of a project, a construction contract presented to you is the starting point. When looking at the contract, be sure to have some non-negotiable items in mind when taking a critical eye to the terms of that contract. Some of these terms may be more or less negotiable depending on your experience with the other party to the construction contract. For instance, striking a pay if paid clause may be less important with a paying party with whom you have a 10 year history without payment problems. On the other hand, if it is your first contract with the other party, a stricter list may be required. So, much like a dealer that you know will stand behind its cars, you may be more willing to take more “risk” in entering a construction contract with a trusted/known owner or GC.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
May Heat Wave Deaths Prompt New Cooling Rules in Chicago
July 25, 2022 —
The Associated Press (Don Babwin) - BloombergChicago (AP) -- A month after three women were found dead inside their stifling hot apartments at a Chicago senior housing facility, the City Council on Wednesday passed new cooling requirements for residential buildings.
Under the rules approved by the Council's Zoning Committee on Tuesday and the full Council on Wednesday, any new construction of senior facilities and larger residential buildings must include permanent air conditioning, giving them the same requirements already in place for nursing homes.
Any time the heat index climbs above 80 degrees, those buildings must run their air conditioning systems. Existing housing for older people can use portable cooling and dehumidification until May 2024, when they will be required to have permanent equipment installed.
Read the court decisionRead the full story...Reprinted courtesy of
Bloomberg
Affordable Global Housing Will Cost $11 Trillion
October 08, 2014 —
Flavia Krause-Jackson – BloombergReplacing the world’s substandard housing and building affordable alternatives to meet future global demand would cost as much as $11 trillion, according to initial findings in a McKinsey & Co. report.
The shortage of decent accommodation means as many as 1.6 billion people from London to Shanghai may be forced to choose between shelter or necessities such as health care, food and education, data disclosed at the 2014 CityLab Conference in Los Angeles show. McKinsey will release the full report in October.
The global consulting company says governments should release parcels of land at below-market prices, put housing developments near transportation and unlock idle property hoarded by speculators and investors. The report noted that China fines owners 20 percent of the land price if property is undeveloped after a year and has the right to subsequently confiscate it.
Read the court decisionRead the full story...Reprinted courtesy of
Flavia Krause-Jackson, BloombergMs. Krause-Jackson may be contacted at
fjackson@bloomberg.net
CGL, Builders Risk Coverage and Exclusions When Construction Defects Cause Property Damage
May 17, 2021 —
Jeffrey Cavignac - Construction ExecutiveDirect damage to property under construction caused by faulty or defective work or defective materials has been a coverage issue for decades. Two specific policies, the Commercial General Liability for the contractors building the structure and the Builders Risk Policy on the project both are sources of potential coverage.
A CGL policy protects the named insured (the contractor in this case) from third party liability arising out of the insured’s operations that results in either bodily injury or property damage. Damage to property caused by poor workmanship or defective materials would qualify as property damage. To understand how the CGL policy might respond to claims such as these, it is necessary to evaluate several exclusions in the CGL policy.
CGL policies cover “property damage,” defined as physical injury to tangible property, including loss of use of such property, and loss of use of tangible property that has not been physically injured.
Reprinted courtesy of
Jeffrey Cavignac, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
SFAA and Coalition of Partners Encourage Lawmakers to Require Essential Surety Bonding Protections on All Federally-Financed Projects Receiving WIFIA Funds
February 21, 2022 —
The Surety & Fidelity Association of AmericaFebruary 17, 2022 (WASHINGTON, DC) – The Surety & Fidelity Association of America (SFAA) in collaboration with 15 trade associations, sent a letter strongly encouraging members of the Senate Environment and Public Works Committee, led by Chairman Tom Carper (D-DE) and Ranking Member Shelly Moore Capito (R-WV), to require payment and performance protections on federally-financed infrastructure projects receiving Water Infrastructure Finance and Innovation Act (WIFIA) loans, including public-private projects (P3s).
“As the Environment and Public Works Committee looks at legislation in the second session of the 117th Congress to continue the important work of addressing our nation’s water infrastructure, we urge the Committee to amend the Water Infrastructure Finance and Innovation Act (WIFIA) program to help protect taxpayer funds, workers, subcontractors and suppliers, including Small and Disadvantaged Business Enterprise (DBE) Program participants and subcontractors, who build water infrastructure especially in at-risk low income communities,” said Lee Covington, president and CEO, SFAA.
The coalition of partners includes:
American Property and Casualty Association
American Subcontractor Association
Business Coalition for Fair Competition
Council of Insurance Agents and Brokers
Finishing Contractors Association International
International Union of Operating Engineers
Mechanical Contractors Association of America
National Association of Electrical Contractor
National Association of Minority Contractors
National Association of Mutual Insurance Companies
National Association of Surety Bond Producers
Sheet Metal and Air Conditioning Contractors’ National Association
The Association of Union Constructors
The Construction Employers of America
Women Construction Owners and Executives
The Surety & Fidelity Association of America (SFAA) is a nonprofit, nonpartisan trade association representing all segments of the surety and fidelity industry. Based in Washington, D.C., SFAA works to promote the value of surety and fidelity bonding by proactively advocating on behalf of its members and stakeholders. The association’s more than 450 member companies write 98 percent of surety and fidelity bonds in the U.S. For more information visit www.surety.org.
Read the court decisionRead the full story...Reprinted courtesy of
What Should Be in Every Construction Agreement
November 04, 2019 —
Patrick Barthet - Construction ExecutiveA detailed and coherent construction agreement in place on every job minimizes confusion, makes clear everyone’s respective responsibilities and reduces disputes. There are six things that should be addressed in every construction agreement.
DEFINE THE SCOPE
Define what the scope of work is that will be provided. Will it be only materials; will it be materials and labor; or will it be just labor? Be very clear and specific in how the scope of work is spelled out. Many contracts state that the contractor is responsible for all work that’s shown on the plans and specifications, as well as that which is reasonably inferable. While subjective—even if not actually on the plans or specifications, someone may believe that something should be part of the contractor’s work. This could expand what has to be done beyond what was understood or priced.
LIST ALL THE EXCLUSIONS
Do the parties each have the same understanding as to what is covered in the contract? How often are contractors faced with customers thinking something was included as part of the work? The contractor may have believed that task, or that material, or that specially fabricated item was excluded. But was it? Did the contractor articulate what was and was not in the scope and price? Specifically listing what is excluded can obviate this problem. Articulate what is not in the price or scope and reduce the chance of one party believing that something is to be done when it isn't.
Reprinted courtesy of
Patrick Barthet, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Barthet may be contacted at
pbarthet@barthet.com
Bond Principal Necessary on a Mechanic’s Lien Claim
October 23, 2018 —
Christopher G. Hill - Construction Law MusingsAs anyone that reads this construction law blog knows, mechanic’s liens are a big part of the Virginia landscape for a construction attorney like me.
One option for dealing with a mechanic’s lien here in Virginia that we have not discussed but so often is the ability to “bond off” a lien. In short, the Virginia statute allows a party to essentially substitute a bond valued at a court set multiple of the principal amount of the mechanic’s lien for the memorandum. In exchange, the lien is released of record. Any enforcement action can still proceed with security for the claimant and the property owner feeling better about things because there will be no lien on the title to the land.
In many ways this process provides an easier path to resolution for both owner and claimant. First of all, the claimant does not have to deal with a bank or other interest holders in the property (though a recent case discussed below reminds us that certain other parties are necessary). Second of all, the owner does not have the cloud on the title of a mechanic’s lien that may have been filed by a subcontractor over which he has no control.
Read the court decisionRead the full story...Reprinted courtesy of
Christopher G. Hill, The Law Office of Christopher G. HillMr. Hill may be contacted at
chrisghill@constructionlawva.com
