What You Need to Know About “Ipso Facto” Clauses and Their Impact on Termination of a Contractor or Subcontractor in a Bankruptcy
September 12, 2022 —
Martha B. Chovanes & Laurie A. Stanziale - ConsensusDocsWhile contractor bankruptcies have long been an issue in the construction industry, in the aftermath of COVID-19 and the resultant labor, material and supply-chain delays, contractor bankruptcies are of even greater concern. Many construction contracts attempt to protect the upstream party from a bankruptcy filing of its contractor or subcontractor by providing for an automatic right to terminate a contract, referred to as “ipso facto” clauses. However, such clauses are generally unenforceable as bankruptcy laws, specifically Section 365(e) of Title 11 of the United States Code, protect the party filing for bankruptcy (the “Debtor”) from unilateral termination of the contract by the non-Debtor party.
What is an “Ipso Facto” clause? An ipso facto clause is a provision in an agreement which permits its termination by one party due to the bankruptcy, insolvency or financial condition of the other party.
Reprinted courtesy of
Martha B. Chovanes, Fox Rothschild LLP (ConsensusDocs) and
Laurie A. Stanziale, Fox Rothschild LLP (ConsensusDocs)
Ms. Chovanes may be contacted at mchovanes@foxrothschild.com
Ms. Stanziale may be contacted at lstanziale@foxrothschild.com
Read the court decisionRead the full story...Reprinted courtesy of
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
Glendale City Council Approves Tohono O’odham Nation Casino
August 13, 2014 —
Beverley BevenFlorez-CDJ STAFFWith a 4-3 vote, the Glendale, Arizona city council “approved an agreement with the Tohono O’odham Nation to build a casino adjacent to the city,” according to the Arizona Public Media. The tribe, under the agreement, “will commit more than $25 million over the next 20 years to the city.”
The agreement also stipulates that Glendale “will try to convince state and federal officials to end their opposition to the casino plans.” City Councilman Gary Sherwood stated that he “he doesn't believe the tribe has firm plans for construction yet, but he said he wouldn't be surprised if there was gaming on the site by next fall.”
Read the court decisionRead the full story...Reprinted courtesy of
The Heat Is On
June 13, 2022 —
Christopher Durso - Construction ExecutiveEvery year, NASA and the National Oceanic and Atmospheric Administration (NOAA) team up to assess global temperatures and climate trends. (Yes, that NASA. A big part of the space agency’s mission is focused on Earth science, with the goal of better understanding the planet’s interconnected systems.) The two groups released their findings for 2021 this past January, with several predictably alarming highlights:
- 2021 was the sixth-warmest year on record, with the average global surface temperature about 1.5°F over the 20th-century baseline periods that the agencies use for comparison and nearly 2°F higher than in the late-19th century.
- The surface temperature in the Northern Hemisphere was also the sixth-highest on record, at nearly 2°F over baseline, with the land temperature exceeding the baseline by 2.8°F.
- Extreme climate events included an above-average Atlantic hurricane season, with 21 storms, and a severe heat wave in the northwestern United States and western Canada in June during which Canada recorded its highest temperature ever, at 121°F.
Reprinted courtesy of
Christopher Durso, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Construction Suit Ends with Just an Apology
February 10, 2012 —
CDJ STAFFAfter suing a contractor for failing to complete the remodeling of their home, an Orange County couple has settled for an apology. Douglas J. Pettibone represented the contractor, who had lost his business after a broken neck, multiple surgeries, and an addiction to pain medicine. Mr. Pettibone represented his client pro bone. The case was settled in arbitration by JAMS.
Mr. Pettibone noted that his client gave “a heartfelt and very moving apology.” The remodeling was completed by another contractor, two years after Thorp Construction stopped work on the project. After the apology, the case was dismissed.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
Safer Schools Rendered Unsafe Due to Construction Defects
February 10, 2012 —
CDJ STAFFBuilt on a program for safer school buildings, schools in Neenan County, Colorado have been shown to have mild-to-moderate structural problems, rendering some of them unsafe. The Denver Post reports that a third-party review of schools built by the Neenan Company has shown structural issues in all fifteen school buildings.
One school, Meeker Elementary, has been closed as it could collapse under high winds or during an earthquake. Sargent Junior-Senior High School is in use, but there are plans to evacuate the buildings if winds exceed 25 mile per hour. Two schools have roofs that are unable to bear expected loads of snow during the winter.
The Neenan Company says that the school buildings are not up to their standards and is working with the school districts to repair the buildings. Repairs are expected to be complete by August.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
The Insurance Coverage Debate on Construction Defects Continues
February 05, 2015 —
Craig Martin – Construction Contractor AdvisorNew Hampshire is the first court of 2015 to weigh in on construction defect coverage issues. The case, Cogswell Farm Condominium Association v. Tower Group, involved a typical situation. Lemery Building Company was hired to build 24 residential condominium units. After construction, the condominium association sued the builder asserting that the weather barrier, including the water/ice shield, flashing, siding, and vapor barrier, was defectively constructed and resulted in damage to the units due to water leaks. The condominium association also sued Lemery’s insurer for a determination as to whether the builder’s Commercial General Liability (CGL) insurer had to provide coverage for the claim.
The trial court ruled against the condominium association, finding that the “your work” exclusion applied. The exclusion in the builder’s CGL policy provided that there was no coverage for property damage to “[t]hat particular part of any property that must be restored, repaired or replaced because ‘your work’ was incorrectly performed on it.”
Read the court decisionRead the full story...Reprinted courtesy of
Craig Martin, Lamson, Dugan and Murray, LLPMr. Martin may be contacted at
cmartin@ldmlaw.com
Crime Lab Beset by Ventilation Issues
January 29, 2014 —
Beverley BevenFlorez-CDJ STAFFA new crime lab in Clayton county, Missouri, is beset with “’hurricane-like’ gales and persistent dripping water that officials say threatened to contaminate key evidence from crimes,” reported the St. Louis Post-Dispatch. St. Louis County Police Chief Tim Fitch admitted that he didn’t believe any evidence has been destroyed yet, but we’re “talking about highly sensitive evidence from homicide scenes that we must assure is not being contaminated by leakage or other means.”
According to the St. Louis Post-Dispatch, the “general contractor and public works official insist the problems—and extreme temperature differences among rooms—were glitches expected in any major project, and are being fixed.”
Read the court decisionRead the full story...Reprinted courtesy of
