Construction Spending Highest Since April 2009
October 25, 2013 —
CDJ STAFFThe Commerce Department has announced that construction spending has increased by 0.6 percent, but that modest gain puts it at the highest it has been in four and a half years. The last time construction spending was this high was April 2009.
The rise in construction spending is due to increases in both public and private construction project. Public construction was up, despite a decrease in spending by the federal government. Private residential construction is at a five-year high.
Read the court decisionRead the full story...Reprinted courtesy of
Navigate the New Health and Safety Norm With Construction Technology
August 03, 2020 —
Jeremy Larsen - Construction ExecutiveSafety has always been a pressing issue in construction, and as states reopen and construction projects pick up steam once again, the industry will become even more closely scrutinized than before. Construction safety looks a lot different than it did six months ago. In addition to the concerns around keeping workers safe on construction sites, today’s contractors are faced with a whole new category of risk, and with new health and safety measures that may vary by county, state or region. New requirements range from social distancing and limits on the size of crews, to requiring masks and temperature checks for all workers.
OPERATING IN THE NEW NORM
This sudden onset of COVID-19 put otherwise healthy businesses into a state of chaos that, months later, is still hard to navigate. By March of 2020, reports indicated that nearly one-third of construction projects had come to a halt. Now, as the industry emerges, balancing business continuity efforts with trying to get crews back to work and jobsites moving again will no doubt present challenges. New health and safety measures, plus the fact that no one wants to touch paper in the field, will add another layer of administrative and procedural oversight to the construction process. Of course, these measures are absolutely needed, but construction businesses can’t ignore the fact that it changes the very way projects and jobsites are managed. And, without the right tools in place, it may be a bumpy ride.
Reprinted courtesy of
Jeremy Larsen, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Larsen may be contacted at
jeremy.larsen@viewpoint.com
Mitigating Mold Exposure in Manufacturing and Multifamily Buildings
July 31, 2024 —
Laura Champagne - Construction ExecutiveAs hurricanes season and summer storms approach, more apartment complexes, commercial and industrial properties, and public buildings are at risk of leaking and flooding. Water-saturated structures are prime breeding grounds for mold, but there are ways to prevent, detect and remove it before it becomes a serious and costly issue—for buildings and building residents alike. Being proactive limits an owner’s exposure to the liability of debilitating health effects and structural safety concerns.
Mold requires three things to grow: water, food and humidity. Water will stealthily penetrate small porous surfaces of any building material, such as drywall, plaster, wood, concrete or even fabrics. These materials serve as a food source to quickly produce more fungus. Common sources of undetected water flow include foundation problems, poorly installed windows, roof malfunctions, gutter clogs, storm damage, leaky pipes, improper drainage, HVAC issues, faulty appliances, bathroom vent issues and wet building materials. Mold loves humidity and thrives in dark, warm environments, such as attics, basements, lofts, building corners and bathrooms.
Reprinted courtesy of
Laura Champagne, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Appeal of an Attorney Disqualification Order Results in Partial Automatic Stay of Trial Court Proceedings
October 11, 2017 —
Howard M. Garfield & Renata L. Hoddinott - Haight Brown & Bonesteel LLPIn URS Corporation v. Atkinson/Walsh Joint Venture (No. G055271 filed September 26, 2017), Division Three of the Fourth Appellate District dealt with, for the first time, the question of whether an appeal of an attorney disqualification order results in an automatic stay of the trial proceedings and, if so, how far the automatic stay extends.
The underlying action involved a construction dispute between a contractor and subcontractor. During the pendency of that action, one party’s counsel filed a motion to disqualify another party’s counsel based on an alleged misuse of mediation-privilege protected documents. The trial court granted the disqualification motion and the disqualified counsel promptly filed a notice of appeal. The trial court then denied an application to stay proceedings pending the appeal, rejecting the assertion that the appeal automatically stayed the underlying proceedings.
Reprinted courtesy of
Howard M. Garfield, Haight Brown & Bonesteel LLP and
Renata L. Hoddinott, Haight Brown & Bonesteel LLP
Mr. Garfield may be contacted at hgarfield@hbblaw.com
Ms. Hoddinott may be contacted at rhoddinott@hbblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Builders Beware: Smart Homes Under Attack by “Hide ‘N Seek” Botnet
October 30, 2018 —
Scott L. Satkin & Amtoj S. Randhawa - Newmeyer & Dillion LLPGerman manufacturer eQ-3 has found itself under siege by a botnet known as "Hide 'N Seek." This pernicious malware has infected tens of thousands of eQ-3's smart home devices by compromising the device's central control unit. Once a device has been infected, the malware spreads to other Internet of Things ("IoT") devices connected to the same wireless network. IoT devices have become the prime target for botnet attacks. As opposed to computers, laptops, or other larger computing devices, the smaller storage capacity and lower processing power of IoT devices limit the amount and complexity of the security measures that can be installed—making them an easier target for botnets.
What is a Botnet?
For those unfamiliar with the term, a botnet is a network of devices infected with a malware program allowing the infector to control and/or exploit the devices. Once a suitable number of devices are infected, the person or group controlling the botnet can harness the computing power of each infected device to perform activities which were previously constrained by a single device's capabilities (i.e. DDoS attacks, spamming, cryptocurrency mining, etc.).
Hide 'N Seek – History and Capabilities
The Hide 'N Seek botnet first appeared in January 2018 and has since spread rapidly. Its sophisticated design and capabilities have captivated the attention of many security watchdogs and researchers. While many botnets are designed to be "quick and dirty" (i.e. infect a few devices, eke out a little profit, and inevitably be cleared out or rendered ineffective by security updates and fixes), Hide 'N Seek was designed to maintain itself in the host's system indefinitely. When it was first released, Hide 'N Seek primarily targeted certain routers and internet-enabled security cameras; however, it has now began targeting digital video recorders, database servers, and most recently, smart home hubs.
Hide 'N Seek's communication capabilities are also more advanced than previous botnets. Previous botnets relied on existing communications protocols to communicate with other another, but Hide 'N Seek uses a custom-built peer-to-peer system to communicate. This advancement allows Hide 'N Seek to spread more rapidly than previous botnets.
Hide 'N Seek is also capable of extracting a device owner's personal information (i.e. name, address, e-mail, telephone numbers, etc.) whereas previous botnets were not. Most importantly, Hide 'N Seek is consistently updated to increase its infection rate, decrease its detection probability, and bypass any security measures designed to detect and remove it from the system. This modularity has proved to be Hide 'N Seek's greatest strength.
Protecting Against Hide 'N Seek and Other Botnets
While many of the precautions will undoubtedly come from the device manufactures vis-à-vis software programming and updates, homebuilders can still take some precautions to protect their customers.
- When selecting a smart home system to incorporate into a home's construction, be sure to evaluate its security features including, but not limited to its: wireless connectivity, password/passphrase requirements, interconnectedness with other IoT devices, etc. Third-party reviews from tech-oriented outlets will likely have useful information on a device's security measures, vulnerabilities, and any recent security compromises.
- Be vigilant in installing any eQ-3 smart home systems. The extent of the damage caused by Hide 'N Seek botnet remains unknown, as does damage from other potentially-infected technology. Thus, it may be prudent to avoid installing any eQ-3 device until it becomes evident that the threat has been neutralized and all security vulnerabilities have been remedied.
- If a builder uses technology other than eQ-3, precautions must be taken. Ensure that technology providers are thoroughly researched. It is also recommended to include strong contractual indemnity provisions, and require vendors to carry cyber-specific insurance policies.
- Homebuilders should consider purchasing their own stand alone cyber liability policies as a safety net, should potential exposure arise.
Scott Satkin and Amtoj Randhawa are associates in the Cybersecurity group of Newmeyer & Dillion. Focused on helping clients navigate the legal dispute implications of cybersecurity, they advise businesses on implementing and adopting proactive measures to prevent and neutralize cybersecurity threats. For questions on how they can help, contact Scott at scott.satkin@ndlf.com and Amtoj at amtoj.randhawa@ndlf.com.
Read the court decisionRead the full story...Reprinted courtesy of
ASCE's Architectural Engineering Institute Announces Winners of 2021 AEI Professional Project Award
April 19, 2021 —
American Society of Civil EngineersRESTON, Va. – The
American Society of Civil Engineers' (ASCE) Architectural Engineering Institute (AEI) is pleased to announce the 100 Mount Street project by Skidmore, Owings & Merrill and Billie Jean King Main Library, also by Skidmore, Owings & Merrill as Best Overall Projects winners for AEI's Professional Project Awards. The 100 Mount Street project won the award Best Overall Project Over $100 Million, while the Billie Jean King Main Library won the award for Best Overall Project Under $100 Million. Traditionally, AEI announces project winners during its in-person annual Awards Banquet; however, ASCE held the banquet virtually this year to follow CDC guidelines which suggest avoiding large gatherings.
The AEI Professional Project Award recognizes outstanding achievements in design and construction by honoring the art and science of an integrated approach to architectural engineering. The program focuses on high performance buildings including structural, mechanical, electrical and lighting systems as well as construction management and architectural engineering integration. Projects are evaluated on originality and innovative character, integration and collaboration, sustainability, energy efficiency and economics, effective use of technology and constructability and site logistics.
ABOUT THE AMERICAN SOCIETY OF CIVIL ENGINEERS
Founded in 1852, the American Society of Civil Engineers represents more than 150,000 civil engineers worldwide and is America's oldest national engineering society. ASCE works to raise awareness of the need to maintain and modernize the nation's infrastructure using sustainable and resilient practices, advocates for increasing and optimizing investment in infrastructure, and improve engineering knowledge and competency. For more information, visit www.asce.org and follow us on Twitter, @ASCETweets and @ASCEGovRel.
About ASCE's Architectural Engineering Institute
Established in 1998, AEI is the premier organization for architectural engineering, promoting an integrated, multi-disciplinary approach to planning, design, construction and operation of buildings, by encouraging innovation, collaboration and excellence in practice, education and research of architectural engineering. For more information, visit www.asce.org/aei.
Read the court decisionRead the full story...Reprinted courtesy of
American Society of Civil Engineers
Obtaining Temporary Injunction to Enforce Non-Compete Agreement
June 09, 2016 —
David Adelstein – Florida Construction Legal UpdatesWhen a party breaches a
non-compete agreement (with a
non-solicitation clause), the non-breaching party typically moves for a
temporary injunction. The breaching party is the party that signed the
non-compete agreement, such as a former employee or consultant that agreed not to solicit its employer’s customer lists or
referral sources upon leaving. The non-breaching party or the party moving for the
temporary injunction is the party that is looking to protect its trade secret customer lists or referral sources, such as the employer.
Read the court decisionRead the full story...Reprinted courtesy of
David M. Adelstein, Kirwin NorrisMr. Adelstein may be contacted at
dma@kirwinnorris.com
Lewis Brisbois Ranks 11th in Law360’s Glass Ceiling Report on Gender Parity in Law Firms
October 11, 2021 —
Lewis BrisboisLewis Brisbois has ranked 11th in Law360’s 2021 Glass Ceiling report, moving up from 37th place in 2020. The report measures female presence and gender parity in law firms, this year evaluating 269 organizations.
As described in the Law360 Pulse article titled "Glass Ceiling Report: How Does Your Firm Stack Up?," the publication redesigned its report this year to evaluate female attorneys’ industry standing from a new angle by showing how the percentage of women across three levels within law firms compared with the potential marketplace of hires. This evaluation resulted in the firms’ "pipeline scores," which measure a firm’s percentage points above or below a set of benchmarks assembled with data from the American Bar Association and previous Law360 submissions.
Lewis Brisbois’ Los Angeles Co-Managing Partner Jana Lubert and Chief Strategy Officer Janet Eskow, the co-chairs of Lewis Brisbois' Women's Initiative, each expressed excitement about the report, along with resolve to further promote gender diversity. "We are proud that Lewis Brisbois has moved up in these rankings because we have focused diligently on hiring and retaining the best legal talent from a diverse pool of candidates nationwide," Ms. Lubert said. "At the same time, we recognize that there is more to be done to further improve gender equity and inclusion. We remain committed to this important goal, both as it pertains to Lewis Brisbois and to the entire legal industry," she added.
Read the court decisionRead the full story...Reprinted courtesy of
Lewis Brisbois
