Fairfield Connecticut Building Expert Directory

The Benefits of Incorporating AI Into the Construction Lifecycle

December 23, 2024 — Ian Warner - Construction Executive
Interest in artificial intelligence has been spreading like wildfire over the past few years. AI is not a new term for Trimble, which has been capturing and leveraging construction data for decades. From hardware to software, the field to the office or among stakeholders, harnessing and making meaning out of data is the crux of Trimble’s business. Generative AI is simply a new set of tools that provide a richer narrative around data, making it more insightful and actionable. As a company that helps connect stakeholders across the entire construction lifecycle—design, construction and operations/ maintenance—AI has been woven in and leveraged across a number of Trimble solutions to help contractors do more with less, while also giving them greater decision-making power and the ability to focus on other key challenges. While the use cases for AI are diverse and ever-changing, below are a few key areas where Trimble has doubled down on AI, with the goal of making contractors’ jobs less cumbersome and repetitive, safer and more capable of being upskilled—efforts which will only continue to grow in the coming years. Reprinted courtesy of Ian Warner, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

What If There Is a Design Error?

October 30, 2023 — Scott L. Baker - Los Angeles Litigation Blog
Many challenges can crop up when working on a construction project. Among these challenges, errors are the last thing that contractors or project owners want to face. Yet, they are not uncommon as you navigate the process. Design errors or mistakes are one such issue that can result in serious construction disputes and delays. It is important to determine who is liable when it comes to defects and design errors. So, who is responsible for design errors? Many might assume the architect – or the person who created the project design – is responsible for design errors. That is not necessarily true. Read the court decision
Read the full story...
Reprinted courtesy of Scott L. Baker, Baker & Associates
Mr. Baker may be contacted at slb@bakerslaw.com

Fixing the Problem – Not the Blame

November 30, 2016 — Curtis W. Martin – Peckar & Abramson, P.C. Bulletin
Who is responsible for defective design under Texas law? The contractor, under Lonergan? The owner, under Spearin? A recent Fifth Circuit decision suggests that in some cases this might be the wrong question when design responsibility is disputed. The appellate court recently remanded a case back to the district court to determine whether the contractor or owner breached an implied duty to cooperate in discovering defects in design and subsequently pricing the change required to correct the problem. Read the court decision
Read the full story...
Reprinted courtesy of Curtis W. Martin, Peckar & Abramson, P.C.
Mr. Martin may be contacted at cmartin@pecklaw.com

Pennsylvania: When Should Pennsylvania’s New Strict Products Liability Law Apply?

February 05, 2015 — Robert Caplan and Timothy Carroll – White and Williams LLP
Pennsylvania has maintained its own peculiar brand of strict products liability law ever since the Supreme Court decided Azzarello v. Black Bros. Co., Inc.[1] in 1978. Maligned by many as “absurd and unworkable,”[2] if “excessively” orientated towards plaintiffs,[3] Azzarello’s unique approach to the Restatement (Second) of Torts § 402A (1965)[4] has recently been judicially consigned to the dustbin of history. In Tincher v. Omega Flex, Inc.,[5] decided on November 19, 2014, the Pennsylvania Supreme Court expressly overruled Azzarello leaving in its place a new alternative standards approach to proving a Section 402A claim. An injured worker or subrogated insurer[6] must still prove that the seller, whether a manufacturer or a distributor, placed the product on the market in a “defective condition unreasonably dangerous to the consumer.”[7] But now, under Tincher, a plaintiff must use either a “consumer expectation test” or a “risk-utility test” to establish that criterion.[8] Reprinted courtesy of Robert Caplan, White and Williams LLP and Timothy Carroll, White and Williams LLP Mr. Caplan may be contacted at caplanr@whiteandwilliams.com; Mr. Carroll may be contacted at carrollt@whiteandwilliams.com Read the court decision
Read the full story...
Reprinted courtesy of

Pennsylvania Reconstruction Project Beset by Problems

October 15, 2014 — Beverley BevenFlorez-CDJ STAFF
The Pittsburgh Post-Gazette reported that “[t]he Penn Avenue reconstruction project in Garfield, described as ‘a comedy of errors’ by one neighborhood leader, remains months behind schedule and has gone well over budget.” The $4.7 million construction budget has increased “by at least $800,000,” according to the Pittsburgh post-Gazette. Problems included the underground utilities not on maps or mapped inaccurately, water lines breaking, and old streetcar tracks were discovered to have contaminated soil. Rick Swartz, executive director of the Bloomfield-Garfield Corp., told the Gazette that the project has been “plagued with problems and poor communication from the very start.” Read the court decision
Read the full story...
Reprinted courtesy of

Condo Developers Buy in Washington despite Construction Defect Litigation

October 22, 2014 — Beverley BevenFlorez-CDJ STAFF
Marc Stiles writing for Puget Sound Business Journal stated that “[t]he belief that contractors have been scared off by the legal liabilities that come with [condo] projects doesn't seem to hold water.” He interviewed Suzi Morris, of Lowe Enterprises, who plans on building a new condo tower in Seattle this November. Morris stated that they didn’t have any problems getting construction bids for the 24-story tower. According to the Puget Sound Business Journal, “The development team is trying to head off construction defect claims by planning and documenting with photos their work.” Stiles did admit that an unnamed “source in Seattle who consults on condo projects knows of two large general contracting companies that won't bid on condo projects because of” potential construction defect litigation. Read the court decision
Read the full story...
Reprinted courtesy of

Which Cities have the Most Affordable Homes?

October 08, 2014 — Beverley BevenFlorez-CDJ STAFF
Builder analyzed U.S. cities with populations of half a million or more and then filtered further with cities that have a “median new home closing price under $250,000, a first mortgage rate below 4 percent for new homes, and a median new home price per square foot below $125.” Topping the list was El Paso, Texas with the lowest median price ($168,600). Fifth on the list was San Antonio-New Braunfels, Texas with a median price of $230,400. Read the court decision
Read the full story...
Reprinted courtesy of

Engineer TRC Fends Off Lawsuits After Merger

August 17, 2017 — Scott Van Voorhis - Engineering News-Record
In the wake of its merger with an investment fund, TRC Cos. has been busy swatting away pesky shareholder lawsuits driven by law firms who specialize in such litigation. Read the court decision
Read the full story...
Reprinted courtesy of Scott Van Voorhis, ENR
ENR may be contacted at ENR.com@bnpmedia.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES