SEATTLE WASHINGTON BUILDING EXPERT
DIRECTORY AND CAPABILITIES

Home Construction Thriving in Lubbock

December 30, 2013 — CDJ STAFF
The 2013 numbers for home construction aren’t ready yet, but the January through November numbers for Lubbock, Texas show a 42% increase over the number of construction permits issued for single-family homes in the first 11 months of 2012. The number look even better compared to 2011’s totals, according to KFYO. Read the court decision
Read the full story...
Reprinted courtesy of

---

Surviving a Tornado – How to Navigate Insurance Claims in the Wake of the Recent Connecticut Storm

May 24, 2018 — Geoffrey Miller - Saxe Doernberger & Vita, P.C.
Five minutes after I parked my car, a tree fell on it. On Tuesday, May 15th I pulled into my driveway, in my small Connecticut neighborhood, under a grey sky. As soon as I walked in the house, the lights flickered. And then suddenly there was a loud “Crack!” and “Crash!” and the sound of breaking glass. I looked out the window and trees were bent 90 degrees, then snapping, and then flying up instead of falling down. As quickly as it came, it passed. When I stepped outside, my first thought was that my car has seen better days. Read the court decision
Read the full story...
Reprinted courtesy of Geoffrey Miller, Saxe Doernberger & Vita, P.C.
Mr. Miller may be contacted at gjm@sdvlaw.com

---

The Importance of the Recent Amendment to Rule 702 of the Federal Rules of Evidence

January 22, 2024 — Andrew G. Vicknair - The Dispute Resolver

Every litigator understands that expert witnesses play a key role in litigation, especially when dealing with construction issues. Expert testimony at trial can be a deciding factor in persuading a judge or jury in your client’s favor. It is so important that, as parties get closer to trial, litigators often spend considerable time filing motions to limit or disqualify certain aspects of expert testimony in an effort to gain an advantage at trial. Because experts are a key aspect of the trial process, it is important to understand the various rules governing use of expert testimony, primarily Rule 702 of the Federal Rules of Evidence.

On December 1, 2023, amendments to Rule 702 of the Federal Rules of Evidence went into effect which added the language in underline below and removed the language which is crossed out:

Rule 702. Testimony by Expert Witness

A witness who is qualified as an expert by knowledge, skill, experience, training, or education may testify in the form of an opinion or otherwise if the proponent demonstrates to the court that it is more likely than not that:

(a) the expert’s scientific, technical, or other specialized knowledge will help the trier of fact to understand the evidence or to determine a fact in issue;

(b) the testimony is based on sufficient facts or data;

(c) the testimony is the product of reliable principles and methods; and

(d) the expert has reliably applied expert’s opinion reflects a reliable application of the principles and methods to the facts of the case.

Read the court decision
Read the full story...
Reprinted courtesy of Andrew G. Vicknair, D'Arcy Vicknair, LLC
Mr. Vicknair may be contacted at agv@darcyvicknair.com

---

Affordable Housing, Military Contracts and Mars: 3D Printing Construction Potential Builds

September 05, 2022 — Adam J. Weaver & Lindsey Mitchell - Gravel2Gavel Construction & Real Estate Law Blog
The 3D printing construction market is likely on the cusp of a boom. This unique construction method boasts many advantages in comparison to traditional forms of construction. Projects can be completed more quickly and at a fraction of the cost, given fewer laborers are required and the materials used are much cheaper. Though market growth stalled during the COVID-19 pandemic, industry leaders expect 3D printing construction to experience exponential growth in the coming years. While 3D printing technology has risen in popularity and prominence in the past couple of decades, it is only recently that 3D printing companies have begun making strides in the construction industry. Critical to the construction process is the software that is used to create and model the planned structure. A software program turns a building’s blueprint into code that then dictates the movement of a 3D printer on the construction site. After a concrete-like mix is loaded into the printer, the printer begins to build the walls by laying one cylindrical layer of concrete at a time, in accordance with the blueprint. There is no one-size-fits-all approach in 3D printing construction: some companies print the core structure as well as the roof and floor of the structure, while others print only the core and shell and install those portions separately using traditional methods and materials. Reprinted courtesy of Adam J. Weaver, Pillsbury and Lindsey Mitchell, Pillsbury Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com Read the court decision
Read the full story...
Reprinted courtesy of

---

The Flood Insurance Reform Act May be Extended to 2016

April 07, 2011 — Beverley BevenFlorez CDJ STAFF

The Flood Insurance Reform Act of 2011 (H. R. 1309) has been referred to the House Committee on Financial Services—the first step in the legislative process. The bill, if passed, would extend the program to September 30, 2016. It is currently slated to be terminated September 30 of this year. The bill also contains changes to premium rates, mapping protocols, and privatization initiatives.



H. R. 1309 has garnered the support of several Insurance organizations. Leigh Ann Pusey, president and CEO of the American Insurance Association (AIA), sent a letter of support to the Chair and Ranking member of the House Financial Services Subcommittee. “AIA has advocated for a long term reauthorization of the NFIP to protect consumers and help increase stability for real estate transactions and policyholders,” Pusey said. “AIA believes the five-year extension contained in HR 1309, will provide certainty in the flood program thereby increasing consumer and business confidence in the NFIP.”



Jimi Grande, senior vice president of federal and political affairs for the National Association of Mutual Insurance Companies (NAMIC) spoke out in support of the bill. “For the NFIP to survive, the prices for flood insurance must reflect the actual costs of flood risk for a property,” Grande said. “HR 1309 will provide that transparency. In addition, the Technical Mapping Advisory Council will give communities a voice in the flood mapping process, fostering a better understanding of what flood maps represent and how they are made.”



Read H. R. 1309... 
Read the American Insurance Association statement... 
Read the NAMIC Press Release...

Read the court decision
Read the full story...
Reprinted courtesy of

---

The Relevance and Reasonableness of Destructive Testing

August 17, 2017 — David Adelstein - Florida Construction Legal Updates
Destructive testing is a routine investigatory procedure in construction defect disputes. The destructive testing is necessary to determine liability (causation), the extent of damage, and the repair protocol. Destructive testing is designed to answer numerous questions: Why did the building component fail? Was the building component constructed incorrectly? What is the magnitude of the damage caused by the failure? What specifically caused the damage? What is the most effective way to fix the failure and damage? There are different iterations to the same questions, but in many instances, destructive testing is necessary to answer these questions. Claimants sometimes prohibit destructive testing. Of course, destructive testing is intrusive. In many instances, it is very intrusive. But, this testing is a necessary evil. Without this testing, how can a defendant truly analyze their potential exposure and culpability? They need to be in a position to prepare a defense and figure out their liability. This does not mean destructive testing is warranted in every single construction defect dispute. That is not the case. However, to say it is never warranted is irrational. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Florida Construction Legal Updates
Mr. Adelstein may be contacted at Dadelstein@gmail.com

---

The Condo Conundrum: 10 Reasons Why There's a 'For Sale' Shortage in Seattle

December 20, 2017 — Dave Suggs - CDJ STAFF
Seattle Washington is experiencing a shortage of in-city condos. Of the 27,000 units of new housing being built in downtown Seattle, 94 percent will be rentals. As housing prices are rising in the US’s fastest-growing large city, the median home price is $660,000. Dean Jones of the Seattle Magazine reports on why consumers consider condos, but home developers don’t in his article “The Condo Conundrum: 10 Reasons Why There's a 'For Sale' Shortage in Seattle.” Reason 1, condominiums don’t always offer high returns and can be riskier for the home developer. Reason 2, the Washington State Condo Act “overprotects” buyers of condos with over-the-top warranties that makes everyone in the industry afraid to work with condos. Reason 3, the cost of condo building is increased because of the risk of defect litigation. Reason 4, condo presale buyers are not required to deposit a percentage to invest in a new development and before closing could decide to walk away. Reason 5, there is a lot of interest in apartment buildings from investment groups. Reason 6, investors whose goal is to own “trophy” assets in rising markets can’t wait the years it takes developers to plan and construct a new multistory community. Reason 7, since rent prices have risen 50 percent on average in the last 7 years, it’s profitable to be a landlord. Reason 8, the millennials who live and work in this tech oriented region prefer to rent because of living through the rise and fall of the housing market. Reason 9, the costs is rising each year to deliver new projects. Reason 10, high-rise zoning was adopted 2 years before the recession, so just as condo development was gearing up, apartment building took over. Read the court decision
Read the full story...
Reprinted courtesy of

---

Kumagai Drops Most in 4 Months on Building Defect: Tokyo Mover

June 11, 2014 — Kathleen Chu and Kevin Buckland - Bloomberg
Kumagai Gumi Co. (1861), a Japanese construction company, fell the most in four months after saying an apartment complex it had built has defects. The shares dropped 5.7 percent to 264 yen at the close of trading in Tokyo, the biggest decline since Feb. 4. Construction flaws in supporting pillars were found in the building completed in March 2003 in Yokohama City, south of Tokyo, the company said in a statement through the stock exchange today. The residents have been asked to relocate to temporary shelters and further investigation is required, it said. “This is a big negative for Kumagai’s reputation and it may hurt the company’s future earnings,” said Yoji Otani, an analyst at Deutsche Bank AG in Tokyo. The latest defect comes after Mitsubishi Estate Co. (8802) said in March it will rebuild a residential complex, constructed by Kajima Corp. (1812), in central Tokyo, after defects were found. Mitsui Fudosan Co. (8801) said it would repair some parts of an apartment building in Kawasaki City after the builder Shimizu Corp. (1803) found cracks in the concrete of some columns in April. Ms. Chu may be contacted at kchu2@bloomberg.net; Mr. Buckland may be contacted at kbuckland1@bloomberg.net Read the court decision
Read the full story...
Reprinted courtesy of Kathleen Chu and Kevin Buckland, Bloomberg

---