Fairfield Connecticut Building Expert Directory

Denial of Coverage for Bulge in Wall Upheld

November 26, 2014 — Tred R. Eyerly – Insurance Law Hawaii
The insurer properly denied coverage for a bulge in a warehouse wall that the insured claimed was caused by Hurricane Ike. Russell v. Scottsdale Ins. Co., 2014 U.S. Dist. LEXIS 143882 (S.D. Tex. Sept. 30, 2014). Hurricane Ike displaced metal roof coverings on the insured's warehouse, causing interior water damage to several rooms. Scottsdale eventually paid $84,820.36 for the loss of the roof, less the deductible. The parties disagreed on whether a horizontal bulge on the north wall of the warehouse was also caused by the hurricane. The bulging portion of the wall was not cracked, but cracks were seen around the corners and windows. The insured admitted to an engineer retained by Scottsdale that the cracks in the exterior walls had been filled with caulking on several occasions prior to Hurricane Ike. Scottsdale denied coverage for the damage to the north wall under exclusions for soil sinking, rising, or shifting and for damage from faulty, inadequate or defective design, construction, and repair.The insured later sent a demand for $800,000 for the damage to the wall. A suit was eventually filed by the insured. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Is the Construction Industry Actually a Technology Hotbed?

August 19, 2024 — Andrew Silver - Construction Executive
Technology has always been a driving force behind progress, and the construction industry is no exception. Over the years, technological advancements have revolutionized the way companies design, plan and build structures, leading to increased efficiency, safety and sustainability. From virtual-reality simulations to drones and 3D printing, technology has transformed every aspect of the construction process. However, the construction trades still lag behind other sectors in adoption of digital technologies. With a lack of skilled labor continuing to be an impediment to growth and profitability in the construction industry, technological developments could have significant implications for successful adopters. Already, the industry is seeing a huge difference in valuation between traditional engineering and construction firms and construction software companies. As labor shortages continue to hinder growth in the industry, consolidation is likely, as is the probability that companies with the greatest tech capabilities will be the most highly valued. There are several areas of technology that are of the greatest interest in the current marketplace. BIM Building information modeling with computer-aided design software now allows architects and engineers to create detailed and accurate 3D models of buildings and infrastructure projects, integrating data about every aspect of the building, from materials and costs to energy efficiency and maintenance schedules. These models not only help in visualizing the final product; they also enable better communication and collaboration among project stakeholders. Reprinted courtesy of Andrew Silver, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

How a Robot-Built Habitat on Mars Could Change Construction on Earth

October 14, 2019 — Drew Turney - Engineering News-Record
According to a 2018 report by the International Energy Agency and UN Environment, the global construction industry is responsible for 39% of energy-related carbon-dioxide emissions. That is a huge, scary number—but one that comes with an equally large opportunity to mitigate climate change. The 2015 Paris climate talks revealed that by using existing technology, construction could cut global carbon emissions by up to a third. Read the court decision
Read the full story...
Reprinted courtesy of Drew Turney, ENR
ENR may be contacted at ENR.com@bnpmedia.com

Puerto Rico Grid Restoration Plagued by Historic Problems, New Challenges

November 08, 2017 — Pam Radtke Russell - Engineering News-Record
While the federal government is helping to restore power to Puerto Rico as fast as it can, that work is being made more difficult due to the dilapidated, pre-Hurricane Maria state of the grid and because long-term, post-disaster power restoration is typically not the federal government's mission. Read the court decision
Read the full story...
Reprinted courtesy of Pam Radtke Russell, ENR
Ms. Russell may be contacted at Russellp@bnpmedia.com

Suppliers Must Also Heed “Right to Repair” Claims

October 16, 2013 — CDJ STAFF
“Right to repair” statutes don’t only affect general contractors, but everyone involved in the building of a home, down to those who supply materials, warns Paul Gary in a post on Window & Door. He notes that “if you sell your window or door products in one of the growing number of states with a ‘Notice and Opportunity to Cure’ or ‘Right to Repair’ statute, you need a plan in the event you receive a defect notice relating to your product.” A supplier that receives a statement that a defect exists should, according to Mr. Gary, carefully document not only when the notice was received, but when it was sent, according to postmark, and whether the sender complied with all the regulations. From there, the supplier should determine if there were previous, informal complaints. Finally, determine sales information. At this point, the supplier has the information its insurer will require. His next caution is that in what follows, other may “seek defense and indemnity from you.” And while you may point out problems with the notice,” he counsels that “if you confirm there is an issue with your product, don’t be afraid to make a fair proposal for repair.” Read the court decision
Read the full story...
Reprinted courtesy of

New WOTUS Rule

November 13, 2023 — David R. Cook Jr. - Autry, Hall & Cook, LLP
The U.S. Army Corps of Engineers amended the regulation to conform the definition of “waters of the United States” to conform to the Supreme Court’s ruling in Sackett v. Environmental Protection Agency. See the prior blog post about the Supreme Court’s ruling: Sackett v. Environmental Protection Agency – Construction and Utility Law | Atlanta | AHC Law Federal Register :: Revised Definition of “Waters of the United States”; Conforming Reprinted courtesy of David R. Cook Jr., Autry, Hall & Cook, LLP Mr. Cook may be contacted at cook@ahclaw.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Colorado Federal Court Confirms Consequetial Property Damage, But Finds No Coverage for Subcontractor

November 01, 2022 — Tred R. Eyerly - Insurance Law Hawaii
A recommended decision from the Magistrate Judge of the Federal District Court for the District of Colorado found there was no coverage for the subcontractor's faulty workmanship, but recognized that Colorado finds consequential damages to be property damage. Indian Harbor Ins. Co. v. Houston Cas. Co., 2022 U.S. Dist. LEXIS 117857 (D. Colo. July 5, 2022). The insured, Tripp Construction, was a subcontrator for contructing balconies at an apartment complex. The owner complained that Tripp failed to properly install balconies. The defective installation of certain balcony components damaged other, non-defective components. The general contractor had an OCIP policy issued by Houston Casualty Company (HCC). The general contractor also had a Subcontractor Default policy issued by Indian Harbor. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Recent Supreme Court Decision Could Have Substantial Impact on Builders

January 23, 2023 — Cassidy Ingram - Ahlers Cressman & Sleight
On October 27, 2022, the Washington State Supreme Court issued a decision which could have a substantial impact on the enforceability of contract clauses that require litigation to be commenced within a stated period of time from project completion. In Tadych v. Noble Ridge Construction, Inc.,the Supreme Court held that the contractual one-year statute of limitations for bringing claims against the contractor was substantively unconscionable and reversed the Court of Appeals. In Tadych, plaintiff owners (the Tadychs) contracted with defendant contractor (Noble Ridge Construction, Inc., or NRC) for the construction of a custom home in 2012. The contract included a one-year claim limitations clause that required claims to be raised within a one year period from project completion and that any claims not raised during the one-year period would be waived. In December 2013, as the project neared completion, the Tadychs met with NRC to identify any outstanding project issues. The Tadychs noted several, including rainwater pools at the landing at the bottom of the stairs and several nicks and cracks on the stucco exterior walls. The Tadychs moved into the home on April 8, 2014, and the City of Seattle Department of Planning and Development conducted its final site inspection on April 15 and approved the residence for occupancy on April 23. In January or February of 2015, the Tadychs began to notice a shift in their home. In February of 2015, the Tadychs engaged the Construction Dispute Resolution (CDR) to review NRC’s work. CDR raised concerns about the adequacy of the home’s construction and prepared a written report in March 2015 indicating several deviations from the architectural plans and building codes. The Tadychs sent this report to NRC, who assured the Tadychs that NRC’s work followed all requirements and rejected any claims that there were deviations from the plans. The Tadychs continued to notice issues with the home through October 2016. Read the court decision
Read the full story...
Reprinted courtesy of Cassidy Ingram, Ahlers Cressman & Sleight
Ms. Ingram may be contacted at cassidy.ingram@acslawyers.com

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES