Fairfield Connecticut Building Expert Directory

SunCal Buys Oak Knoll Development for the Second Time

May 19, 2014 — Beverley BevenFlorez-CDJ STAFF
According to the San Francisco Business Times, “Irvine-based SunCal has now bought the same site twice: once in 2005 for $100.5 million and again last week from the Lehman Brothers estate.” Suncal’s original plan to develop the 167-acre Oakland Hills, California project “fell apart after Lehman declared bankruptcy in 2008.” The San Francisco Business Times reported that the “former naval hospital site” has “the potential for more than 900 homes.” The former design included “960 homes, 82,000 square feet of commercial and retail space, and 50 acres of parks and open space.” Read the court decision
Read the full story...
Reprinted courtesy of

Circumstances In Which Design Professional Has Construction Lien Rights

February 24, 2020 — David Adelstein - Florida Construction Legal Updates
If you are a design professional (architect, landscape architect, interior designer, engineer, surveyor, or mapper) you have construction lien rights in the event you are not paid. This does not mean your lien rights are absolute so it is important to understand the circumstances which allow you to record a construction lien on a project. These circumstances are contained in Florida Statute s. 713.03: (1) Any person who performs services as architect, landscape architect, interior designer, engineer, or surveyor and mapper, subject to compliance with and the limitations imposed by this part, has a lien on the real property improved for any money that is owing to him or her for his or her services used in connection with improving the real property or for his or her services in supervising any portion of the work of improving the real property, rendered in accordance with his or her contract and with the direct contract. (2) Any architect, landscape architect, interior designer, engineer, or surveyor and mapper who has a direct contract and who in the practice of his or her profession shall perform services, by himself or herself or others, in connection with a specific parcel of real property and subject to said compliances and limitations, shall have a lien upon such real property for the money owing to him or her for his or her professional services, regardless of whether such real property is actually improved. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Creative Avenue for Judgment Creditor to Collect a Judgment

October 27, 2016 — David Adelstein – Florida Construction Legal Updates
I have a judgment against another entity. Now what? I want to briefly talk about this “now what?” in the context of the recent decision in MYD Marine Distributor, Inc. v. International Paint, Ltd., 41 Fla. L. Weekly D2364a (Fla. 4th DCA 2016). Although this case is not a construction case, it poses an interesting issue for any entity that has a judgment entered against it (known as the judgment debtor) while it is contemporaneously the plaintiff and pursuing monetary damages in an unrelated case or cases. This case also presents an avenue for any judgment creditor to pursue in the event other post-judgment collection efforts are unsuccessful. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Katz, Barron, Squitero, Faust, Friedberg, English & Allen, P.A.
Mr. Adelstein may be contacted at dma@katzbarron.com

GSA Releases Updated Standards to Accelerate Federal Buildings Toward Zero Emissions

August 12, 2024 — The U.S. General Services Administration
WASHINGTON — The U.S. General Services Administration (GSA) is advancing progress toward the Biden-Harris Administration's federal sustainability goals by releasing updated standards for federal buildings. P100 Facilities Standards for the Public Buildings Service establish mandatory design and construction standards and performance criteria for 300,000 federal buildings nationwide. The updated standards will help advance the adoption of cleaner, more efficient technologies for buildings; lead the way towards realizing the goals of the Federal Sustainability Plan to achieve net-zero emissions from all federal buildings by 2045; and promote the use of American-made, low carbon construction materials. P100 requires that facilities adopt advanced energy conservation strategies and eliminate on-site fossil fuel use, directives that align with federal sustainability goals and will accelerate the transition to a clean energy economy. The industry-leading standard calls for grid-interactive efficient buildings, leverages innovative technologies through GSA's Green Proving Ground, requires the use of low-embodied carbon materials, and directs potable water reuse. These comprehensive measures ensure that new and renovated federal facilities achieve peak performance while minimizing environmental impact. The 2024 P100 establishes exceptional benchmarks for:

Electrification: New standards for building equipment and systems to be powered by clean energy sources.
Embodied Carbon: Requirement to utilize low-embodied carbon materials, including salvaged, reused, regenerative, and biomimetic options.
Energy Efficiency: Enhanced building envelope performance to minimize energy loss and improve overall efficiency.
Grid-Interactive Efficient Buildings: New measures to support a more resilient, responsive grid.
Water Reuse: Mandating that buildings have a 15% potable water reuse rate.
Construction Decarbonization: Ground breaking new low-carbon methods for constructing federal buildings including clean energy operations, material salvage, and offsite assemblage.
Labor Practices: New standards protecting workers from unfair or unsafe labor practices, ensuring supply chains are free from child and forced labor and that workers are protected from the impacts of extreme heat.

P100 is updated and published every three years. For more detailed information on the 2024 P100 and other GSA initiatives, visit www.gsa.gov/p100. Read the court decision
Read the full story...
Reprinted courtesy of

Pennsylvania Court Finds that Two Possible Causes Can Prove a Product Malfunction Theory of Liability

September 29, 2021 — Gus Sara - The Subrogation Strategist
In Allstate Ins. Co. v. LG Elecs. USA, Inc., No. 19-3529, 2021 U.S. Dist. LEXIS 127014, the United States District Court for the Eastern District of Pennsylvania considered whether plaintiff’s expert engineer’s opinion that there were two possible causes of a fire—both related to alleged product defects within a refrigerator manufactured by the defendant—was sufficient to support the malfunction theory of products liability. The court found that because both potential causes imposed liability on the product manufacturer and the expert ruled out misuse of the product, as well as all external causes of the fire, it was not necessary for the engineer to identify a specific cause under the malfunction theory. The court also found that the expert’s investigation and opinions met the criteria set forth in Daubert v. Merrell Dow Pharms., Inc., 509 U.S. 579 (1993) and the Federal Rules of Evidence and, thus, were admissible. LG Electronics arose from a fire at the home of Thomas and Lisa Ellis. The public sector fire investigator identified the area of fire origin as the top of a refrigerator manufactured by LG Electronics USA, Inc. (LG). The Ellises filed a claim with their homeowner’s insurance carrier, Allstate Insurance Company (Insurer). Insurer retained a fire investigator and an electrical engineer to investigate the origin and cause of the fire. The fire investigator agreed with the public sector investigator that the fire originated at the top of the refrigerator. The engineer conducted a forensic inspection of the scene and ruled out all potential external ignition sources. He then examined the internal components of the refrigerator. He found arcing activity on a wire at the front top of the refrigerator. He opined that there were two possible causes of the fire: either the heater circuit insulation failed over time due to mechanical damage, or the heat from the internal light fixture ignited combustible components of the refrigerator. Since the engineer ruled out improper use of the refrigerator, he opined that the damage was caused by a manufacturing defect. Read the court decision
Read the full story...
Reprinted courtesy of Gus Sara, White and Williams
Mr. Sara may be contacted at sarag@whiteandwilliams.com

California Posts Nation’s Largest Gain in Construction Jobs

March 28, 2012 — CDJ STAFF

California added about 8,900 construction jobs in January, 2012, as compared to December, 2011, leading the nation in the number of added construction jobs. Thirty-four other states also saw added construction jobs. A year prior, only twenty-eight states added construction jobs. The Associated General Contractors of America analyzed the monthly report from the Labor Department. Ken Simonson, the chief economist for the Associated General Contractors of America noted that “the gains this January partly reflect very mild weather this winter and exceptionally cold and snowy conditions a year before.”

Read the full story…

Read the court decision
Read the full story...
Reprinted courtesy of

Issues to Watch Out for When Managing Remote Workers

July 13, 2020 — Melissa (Powar) Clarke - Payne & Fears
Managing remote workers comes with its share of challenges. The complexities of setting and articulating expectations in a remote work environment – and providing feedback about performance tied to those expectations - adds an additional burden to our already-crowded work lives, particularly for managers who are new to remote supervisory roles. This article highlights some key issues that arise when managing remote workers. Issue 1: Insufficient feedback Annual reviews are not enough. Data clearly reflects that employees who receive regular feedback are happier, and more productive, in their roles. Employees require a “continuous feedback loop” to grow and improve. While many companies started migrating toward continuous feedback before the pandemic, remote work further increases the need for more frequent (formal and informal) check-ins. Organizations must provide management with a toolkit for providing – and receiving – constant feedback, and this toolkit should take into account changes in work styles and modalities of communication when employees are remote. Given the ease with which we can give face-to-face feedback compared to “virtual” feedback, this toolkit becomes even more important when only some employees are remote and others have returned onsite. Read the court decision
Read the full story...
Reprinted courtesy of Melissa (Powar) Clarke, Payne & Fears
Ms. Clarke may be contacted at mec@paynefears.com

How Drones are Speeding Up Construction

July 26, 2017 — Aarni Heiskanen - AEC Business
Drones, or unmanned aerial vehicles (UAVs), are being used in many industries, e.g. agriculture, construction, mining, oil & gas, mapping, and surveying. In construction, drones have proven to be quite disruptive, offering huge productivity increases. Gartner’s famous Hype Cycle for Emerging Technologies, 2016, positioned drones as just entering the Peak of Inflated Expectations. Gartner claims that, “Smart machine technologies will be the most disruptive class of technologies over the next 10 years due to radical computational power, near-endless amounts of data, and unprecedented advances in deep neural networks.” Commercial UAVs are one of the smart machine technologies in question, together with smart robots, autonomous vehicles, cognitive expert advisors, and others. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at info@aepartners.fi

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES