Fairfield Connecticut Building Expert Directory

Turning Back the Clock: DOL Proposes Previous Davis-Bacon Prevailing Wage Definition

April 19, 2022 — David Chidlaw & Carina Novell - Sheppard Mullin Construction & Infrastructure Law Blog
On March 11, 2022, the Department of Labor (“DOL”) proposed reverting the definition of “prevailing wage” under the Davis-Bacon Act to a definition used over 40 years ago. According to the DOL, the proposal is meant to modernize the law and “reflect better the needs of workers in the construction industry and planned federal construction investments.”[1] Brief History Lesson The Davis-Bacon Act was enacted in 1931 and requires the payment of locally prevailing wages and fringe benefits on federal construction contracts. The law applies to workers on contracts in excess of $2,000 entered into by federal agencies and the District of Columbia for the construction, alteration, or repair of public buildings or public works.[2] From the 1930s to the early 1980s, the DOL used the following three-step process to define prevailing wage:

Any wage rate paid to a majority of workers.
If there was no wage rate paid to a majority of workers, then the wage rate paid to the greatest number of workers, provided it was paid to at least 30 percent of workers (i.e., the “30 percent rule”).
If the 30 percent rule was not met, the weighted average rate.

Reprinted courtesy of David Chidlaw, Sheppard Mullin and Carina Novell, Sheppard Mullin Mr. Chidlaw may be contacted at dchidlaw@sheppardmullin.com Ms. Novell may be contacted at cnovell@sheppardmullin.com Read the court decision
Read the full story...
Reprinted courtesy of

Defects, Delays and Change Orders

November 01, 2021 — Jacob A. Epstein - Construction Executive
As every construction professional is aware, unexpected events and problems are guaranteed on every large project. Defects, delays and change orders are sure to arise, and depending on how they are dealt with and addressed at the time, they can either have minimal effects on the overall project or they can have drastic, long-term and often costly effects, including but not limited to thousands of dollars in legal fees, increases in insurance premiums and/or years of litigation down the road. There are many reasons why so many large construction projects end up in some type of litigation. Delay claims, construction contract disputes and construction defect lawsuits are so prevalent in certain parts of the country that certain judges designate specific time blocks in their courtrooms for construction cases only—just to deal with the large portions of their case dockets dealing with construction issues at the same time. Reprinted courtesy of Jacob A. Epstein, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Epstein may be contacted at jepstein@haber.law

DoD Will Require New Cybersecurity Standards in 2020: Could Other Agencies Be Next?

September 09, 2019 — Alexander Gorelik - Smith Currie
The Department of Defense (DoD) has announced a new five-tier standard for cybersecurity certification, which it calls the Cybersecurity Maturity Model Certification, or “CMMC”. Taking an unusual approach to informing the industry, the DoD has provided only limited information about the new standard through its website and a “road tour” led by the newly-appointed head of the DoD’s Chief Information Security Office (CISO), Ms. Katie Arrington. During her recent presentation at the National Institute of Standards and Technology’s (NIST’s) Information Security and Privacy Advisory Board (ISPAB) meeting, on August 8, 2019, Ms. Arrington revealed several new details about the requirements. Outlined below are the most significant facts from that presentation and the DoD’s website:

All companies doing business with DoD (and all tiers of subcontractors) will need to obtain CMMC certifications.

DoD will require the new certifications from all contractors (including suppliers and subcontractors) that are performing under a DoD contract. Even contractors that do not process or handle Controlled Unclassified Information (CUI) must obtain CMMCs. Read the court decision
Read the full story...
Reprinted courtesy of Alexander Gorelik, Smith Currie
Mr. Gorelik may be contacted at agorelik@smithcurrie.com

Clean Water Act Cases: Of Irrigation and Navigability

January 06, 2020 — Anthony B. Cavender - Gravel2Gavel
The federal courts have recently decided two significant Clean Water Act (CWA) cases: State of Georgia, et al. v. Wheeler, where the US District Court for the Southern District of Georgia held that the 2015 rulemaking proceeding of EPA and the U.S. Army Corps of Engineers redefining the term “Waters of the United States” in the CWA violated the Act as well as the Administrative Procedure Act; and the Ninth Circuit’s decision in Pacific Coast Federation of Fishermen’s Associations, et al. v. Glaser, where the appeals court ruled that the lower court erroneously interpreted a CWA NPDES permitting exception involving agricultural return flows. An Absence of Navigability: State of Georgia, et al. v. Wheeler Decided on August 21, 2019, the district court, one of the few courts to grapple with the rule’s compliance with the CWA and the Administrative Procedure Act (APA), held that the agencies’ redefinition of the terms “Interstate Waters,” “Tributaries” and “Adjacent Waters” violated the CWA by reading “navigability” out of the new definitions, or by failing to adhere to the Supreme Court’s rulings in the 2005 case of Rapanos v. United States, in particular Justice Kennedy’s concurrence regarding the application of the “significant nexus” in case-by-case adjudications as to whether a particular body of water was covered by the Act. Moreover, some provisions of the rule conflicted with the APA because they were not a logical outgrowth of the rules proposed by the agencies in 2014, and on which they solicited comments, and other determinations were not supported by a reasonable explanation. In addition, without a clear statement from Congress that it supported the rule’s effect of increasing the nature and extent of enhanced federal jurisdiction over waters subject to the CWA, the court was loathe to approve the rule. Accordingly, the rule was remanded to the agencies for additional review consistent with this decision. This decision is of particular importance as it may well be the first case to subject this new EPA rule—the linchpin of much of EPA’s regulation under the CWA—to extended review. (Other courts have only been asked to enjoin the rule, which involves a different type of review.) Read the court decision
Read the full story...
Reprinted courtesy of Anthony B. Cavender, Pillsbury
Mr. Cavender may be contacted at anthony.cavender@pillsburylaw.com

Is the Construction Industry Actually a Technology Hotbed?

August 19, 2024 — Andrew Silver - Construction Executive
Technology has always been a driving force behind progress, and the construction industry is no exception. Over the years, technological advancements have revolutionized the way companies design, plan and build structures, leading to increased efficiency, safety and sustainability. From virtual-reality simulations to drones and 3D printing, technology has transformed every aspect of the construction process. However, the construction trades still lag behind other sectors in adoption of digital technologies. With a lack of skilled labor continuing to be an impediment to growth and profitability in the construction industry, technological developments could have significant implications for successful adopters. Already, the industry is seeing a huge difference in valuation between traditional engineering and construction firms and construction software companies. As labor shortages continue to hinder growth in the industry, consolidation is likely, as is the probability that companies with the greatest tech capabilities will be the most highly valued. There are several areas of technology that are of the greatest interest in the current marketplace. BIM Building information modeling with computer-aided design software now allows architects and engineers to create detailed and accurate 3D models of buildings and infrastructure projects, integrating data about every aspect of the building, from materials and costs to energy efficiency and maintenance schedules. These models not only help in visualizing the final product; they also enable better communication and collaboration among project stakeholders. Reprinted courtesy of Andrew Silver, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Are Defense Costs In Addition to Policy Limits?

December 02, 2015 — Craig Martin – Construction Contractor Advisor
I recently had a discussion with an insurer about whether defense costs were included within the policy limits of a client’s coverage or in addition to policy limits. This was an important discussion because if costs of defense were included in the policy limits, my client was going to exceed those policy limits in a hurry. How would this situation play out with your insurance? Fortunately, the majority of insurance policies, such as Commercial General Liability (CGL) policies, provide that defense costs are “in addition” to the policy limits. But some policies, often times referred to as “burning limits” policies, provide that cost of defense is included in the policy limits. This means that if you have $1,000,000.00 policy limits, your costs of defense will reduce that limit throughout the course of litigation. Read the court decision
Read the full story...
Reprinted courtesy of Craig Martin, Lamson, Dugan and Murray, LLP
Mr. Martin may be contacted at cmartin@ldmlaw.com

Learning from Production Homes of the Past

August 13, 2014 — Beverley BevenFlorez-CDJ STAFF
Big Builder recaps production homes by decade, beginning with Sears Catalog Homes of the 1920s. They cover major events, original prices, intended buyers, geographic areas, designer/developers, styles/floor plans, and how they broke ground. Big Builder chose to highlight Greenbelt Row Houses for the 1930s, Levittown Tract Homes for the 1940s, as well as additional home builders for each decade through 2010. Read the court decision
Read the full story...
Reprinted courtesy of

New York Revises Retainage Requirements for Private Construction Contracts: Overview of the “5% Retainage Law”

January 22, 2024 — Levi W. Barrett, Patrick T. Murray, Skyler L. Santomartino & Mark A. Snyder - Peckar & Abramson, P.C.
On November 17, 2023, the State of New York enacted the “5% Retainage Law.” This legislation effectively limits the amount of retainage that can be held from general contractors and subcontractors to no more than 5%. It applies to many but not all construction contracts. In addition, the new law revises late stage billing requirements, enabling contractors to invoice for retainage at substantial completion. Previously, the parties to a construction contract were free to negotiate any retainage amount, limited only by an unspecified “reasonable amount” that would be released as the parties contractually set forth. Summary The new law amends Sections 756-a and 756-c of the General Business Law (part of Article 35E of the GBL, known as the “Prompt Pay Act”), and applies to private construction contracts “where the aggregate cost of the construction project, including all labor, services, materials and equipment to be furnished, equals or exceeds one hundred fifty thousand dollars.” Reprinted courtesy of Levi W. Barrett, Peckar & Abramson, P.C., Patrick T. Murray, Peckar & Abramson, P.C., Skyler L. Santomartino, Peckar & Abramson, P.C. and Mark A. Snyder, Peckar & Abramson, P.C. Mr. Barrett may be contacted at lbarrett@pecklaw.com Mr. Murray may be contacted at pmurray@pecklaw.com Mr. Santomartino may be contacted at ssantomartino@pecklaw.com Mr. Snyder may be contacted at msnyder@pecklaw.com Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES