Seattle Washington Building Expert Directory

ACEC Statement on Negotiated Bipartisan Debt Limit Compromise

June 05, 2023 — The American Council of Engineering Companies
Washington, D.C. – The American Council of Engineering Companies (ACEC) released the following statement applauding the negotiated bipartisan compromise to raise the debt limit ahead of the scheduled House vote tonight:

"The American Council of Engineering Companies (ACEC) applauds President Biden and Speaker McCarthy for negotiating a bipartisan compromise to raise the debt limit and avoid a catastrophic default. We are particularly pleased that the bipartisan deal protects the critical funds provided under the Infrastructure Investment and Jobs Act (IIJA) and does not include any changes to the Inflation Reduction Act's (IRA) climate and clean energy provisions, which the engineering industry is working hard to deliver successfully. ACEC also strongly supports the provisions in the deal to reform the federal permitting process. These commonsense measures to modernize the National Environmental Policy Act (NEPA), particularly through the use of digital technologies, will improve interagency collaboration and allow engineering firms to help their clients deliver project benefits more efficiently while ensuring strong environmental protections and opportunities for community and stakeholder engagement."

The American Council of Engineering Companies (ACEC) is the business association of the nation's engineering industry. Founded in 1909, ACEC is a national federation of 51 state and regional organizations representing more than 5,500 engineering firms and 600,000+ engineers, surveyors, architects, and other specialists nationwide. ACEC member firms drive the design of America's infrastructure and the built environment. Read the court decision
Read the full story...
Reprinted courtesy of

Speeding up Infrastructure Projects with the Cloud

July 28, 2018 — Aarni Heiskanen - AEC Business
Infrakit, a cloud service developed by a Finnish startup company, is accelerating infrastructure projects both in Finland and, increasingly, abroad. Automatic transfer of information among parties involved in a project saves time, reduces paperwork, and facilitates the work of land surveyors. In addition to excavators, rock drills can now also be viewed on the map. The CEO and founder of DSC Finland, the supplier of Infrakit, is Teemu Kivimäki. He states that despite the name of the company changing over the years, its principles have stayed the same. Kivimäki describes the functions of the service: “The digital site plans are added to Infrakit, and they can then be viewed on a map and in a 3D view with a browser. When the working machines are also linked to the service, the user can see if the work has been executed according to plan.” Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Last Call: Tokyo Iconic Okura Hotel Meets the Wrecking Ball

August 26, 2015 — Komaki Ito & Andreea Papuc – Bloomberg
Tokyo’s iconic nod to Japanese Modernism, the Hotel Okura, will bid farewell to its last guests next week and face the wrecking ball, despite petitions from around the world to save it. The 1960s-era hotel, which has welcomed international dignitaries and inspired a throng of admirers eager for preservation, will close its doors Aug. 31 to make way for a gleaming new hotel rebuilt in time for the 2020 Olympics, at a cost of about 100 billion yen ($836 million). “What’s odd about the Okura is that it’s a perfect embodiment of ‘60s Modernism, and it represents that very first wave of new development in the region,” Tyler Brule, editor in chief of Monocle magazine, who spearheaded a campaign that included a petition with almost 9,000 signatures, said in an e-mailed response to questions. “For this reason alone, it deserves to be preserved.” Reprinted courtesy of Komaki Ito, Bloomberg and Andreea Papuc, Bloomberg Read the court decision
Read the full story...
Reprinted courtesy of

Does Arbitration Apply to Contemporaneously Executed Contracts (When One of the Contracts Does Not Have an Arbitration Provision)?

January 10, 2018 — David Adelstein - Florida Construction Legal Updates

Binding arbitration is an alternative to litigation. Instead of having your dispute decided by a judge and/or jury, it is decided by an arbitrator through an arbitration process. Arbitration, however, is a creature of contract, meaning there needs to be a contractual arbitration provision requiring the parties to arbitrate, and not litigate, their dispute. Just like litigation, there are pros and cons to the arbitration process, oftentimes dictated by the specific facts and legal issues in the case.

What happens when a person executes two (or more) contemporaneous contracts, one with an arbitration provision and one without? Are the parties required to arbitrate the dispute arising out of the contract that does not contain the arbitration provision?

Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Florida Construction Legal Updates
Mr. Adelstein may be contacted at dadelstein@gmail.com

Is Modular Construction Destined to Fail?

March 11, 2024 — Aarni Heiskanen - AEC Business
The construction sector is a harsh environment for innovation. I’ve been following the story of one Finnish innovative contractor, Lehto Group, over the years with enthusiasm. I was saddened to hear that the group’s three significant subsidiaries joined the ranks of many Finnish contractors who have filed for bankruptcy over the last six months. Lehto developed industrialized building concepts and had its own production facilities. The company had a promising start but eventually ran into problems. Was the industrial approach a mistake, or were other factors contributing to the firm’s fall? Three Contributing Factors Lehto Group’s collapse was not a surprise to its competitors, who had observed warning signs years prior. The company’s order book plummeted in 2024 despite still employing around 500 workers. Rakennuslehti, the leading construction magazine in Finland, asked three experienced industry professionals to give their views on Lehto’s failure. The interviewees spoke anonymously due to the small size of the Finnish market and the sensitive nature of commenting on a competitor’s matters. Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Uniwest Rides Again (or, Are Architects Subject to Va. Code Section 11-4.1?)

October 16, 2018 — Christopher G. Hill - Construction Law Musings
In 2010, the Virginia Supreme Court held in Uniwest Const., Inc. v. Amtech Elevator Servs., Inc., that Va. Code Sec. 11-4.1 renders completely void and unenforceable any indemnification provision in a construction contract between a contractor and subcontractor that seeks to indemnify the indemnified party from its own negligent acts. In short, the Virginia Supreme Court stated that such overly broad provisions violate Section 11-4.1. A recent case out of the Eastern District of Virginia Federal District Court examined a provision in a contract between a designer/architect and a contractor or owner on a project. In Travelers Indem. Co. of Conn. v. Lessard Design Inc. the Court examined the application of Section 11-4.1 to the following provision of a design contract where Lessard, the indemnitor, agreed to:

[i]ndemnify, defend and hold the Owner, Owner’s Developer, and Owner’s and Owner’s Developer’s wholly owned affiliates and the agents, employees and officers of any of them harmless from and against any and all losses, liabilities, expenses, claims, fines and penalties, costs and expenses, including, but not limited to reasonable attorneys’ fees and court costs relating to the services performed by the Architect hereunder . . .

Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, The Law Office of Christopher G. Hill
Mr. Hill may be contacted at chrisghill@constructionlawva.com

Product Liability Alert: Evidence of Apportionment of Fault Admissible in Strict Products Liability Action

March 26, 2014 — R. Bryan Martin and Kristian B. Moriarty - Haight Brown & Bonesteel LLP
In Romine v. Johnson Controls, Inc. (No. B239761, filed March 17, 2014), the California Court of Appeal for the Second District held that a trial court must permit a defendant, in a products liability action, to present evidence of apportionment of fault among settling and non-settling entities. The case involved an automobile collision in which the plaintiff was struck from behind, causing the driver’s seat to recline and propel plaintiff into the back seat where she struck her head. Plaintiff was left quadriplegic as a result. Plaintiff brought suit against the driver who caused the accident, the Nissan entities who manufactured the car plaintiff was driving, Johnson Controls, Inc. (“Johnson”), Ikeda Engineering Corporation (“Ikeda”), Vintec Co. (“Vintec”), and Autoliv ASP, Inc., who designed and manufactured the driver’s seat of the vehicle plaintiff was driving, and against Faurecia Automotive Seating, Inc. who manufactured the recliner mechanism of plaintiff’s vehicle’s front seat. Ikeda participated in the design of the driver’s seat and Vintec manufactured the driver’s seat. Johnson manufactured the seat belt for the driver’s seat of plaintiff’s vehicle in accordance with Nissan’s design. Prior to trial, plaintiff settled with the defendant driver, the Nissan defendants, the Autoliv defendants, and Faurecia Automotive Seating, Inc. Plaintiff elected to proceed to trial solely on a cause of action for strict products liability against Ikeda and Vintec. Pursuant to a stipulation, Johnson agreed it would be legally responsible for damages awarded to plaintiff at trial based upon the actions of Vintec or Ikeda. At trial, the court precluded Vintec and Ikeda from offering evidence that: (1) plaintiff would not have been injured if her vehicle’s seat belt was designed in a different manner by Nissan; (2) Nissan chose the manufacturer of the recliner mechanism and required defendants to use that manufacturer and that part in the seat; and (3) The other defendants had already reached settlements with plaintiff. Reprinted courtesy of R. Bryan Martin, Haight Brown & Bonesteel LLP and Kristian B. Moriarty, Haight Brown & Bonesteel LLP Mr. Martin may be contacted at bmartin@hbblaw.com; Ms. Moriarty may be contacted at kmoriarty@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

#9 CDJ Topic: Vallagio at Inverness Residential Condominium Association, Inc. v. Metropolitan Homes, Inc., et al.

December 30, 2015 — Beverley BevenFlorez-CDJ STAFF
David M. McClain of Higgins, Hopkins, McLain & Roswell, LLC reported on the Colorado Court of Appeals ruling in the above mentioned case regarding the Vallagio condominiums developed by Metro Inverness, LLC. McClain concluded, “As a builder, the moral of the story here is that you need not rely on the Colorado Legislature to protect your ability to arbitrate construction defect claims asserted against you by homeowners associations. All you need to do is to include within your declaration a valid and enforceable declarant consent provision requiring your consent to amend out of the declaration the arbitration requirement for construction defect claims.” Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES