Federal District Court Continues to Find Construction Defects do Not Arise From An Occurrence
May 10, 2012 —
CDJ STAFFCoverage for construction defects continues to be hotly contested in Hawaii state and federal courts. In a recent decision, Judge Mollway felt bound to follow the Ninth Circuit’s decision in Burlington Ins. Co. v. Oceanic Design & Constr., Inc., 383 F.3d 940, 944 (9th Cir. 2004), where the court found construction defect claims arise from breach of contract, not from an occurrence. Judge Mollway’s most recent decision on the issue is Illinois Nat. Ins. Co. v. Nordic PCL Constr., Inc., 2012 U.S. Dist. LEXIS 58464 (D. Haw. April 26, 2012).
Nordic constructed a grocery store for Safeway. In addition to the grocery store, Nordic built a 165-space rooftop parking deck, retail shops and related improvements. After opening for business in 2007, Safeway experienced significant leaks. Safeway demanded that Nordic repair the parking deck. Nordic sent the demand letter to the insurer, who agreed to appoint counsel subject to a reservation of rights.
Safeway filed suit against Nordic in state court alleging, among other things, breach of contract and negligence. The insurer provided Nordic with a defense, but Nordic hired independent counsel.
The insurer filed for declaratory relief in federal district court.
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
California Fears El Nino's Dark Side Will Bring More Trouble
September 17, 2015 —
Brian K. Sullivan – BloombergA group of drought experts gathered in California this week, and it wasn’t long before the conversation turned to El Nino.
They weren’t touting it as the savior that will end the state’s four-year drought. Instead, they were looking at a darker scenario where the weather-changing phenomenon adds another year of dryness in the north while ravaging the south with floods.
“What do you say when the governor asks you what to do? ‘You prepare for flood and drought because there is a possibility you can get both,”’ said Mike Anderson, state climatologist.
Read the court decisionRead the full story...Reprinted courtesy of
Brian K. Sullivan, Bloomberg
Traub Lieberman Partner Lisa Rolle Wins Summary Judgment on Behalf of Contract Utility Company in Personal Injury Action
April 25, 2023 —
Lisa M. Rolle - Traub LiebermanTraub Lieberman Partner Lisa Rolle obtained summary judgment on behalf of a contract utility company (“Utility Company”) in a matter brought before the New York Supreme Court, Queens County. In the complaint, the Plaintiff alleged that she sustained injuries as a result of a trip and fall accident where the Plaintiff’s foot allegedly went into a hole in the grass strip abutting the sidewalk adjacent to a premises located in Queens, NY. The Plaintiff claimed that the defect in the sidewalk was caused by the removal of a utility pole at the curb strip that was not correctly backfilled.
The Defendant Utility Company is in the business of inspecting, treating, and repairing utility and telecommunication structures, including wooden utility poles. TLSS was successfully able to establish that, three years prior to the accident, the Utility Company was retained to conduct a visual inspection of the subject pole. However, the Utility Company does not and has not owned, installed, removed or replaced in-service utility poles in New York or at the location of the alleged accident. Further, TLSS established that the Utility Company did not service or remove the subject pole at the accident site or backfill the curb strip.
Read the court decisionRead the full story...Reprinted courtesy of
Lisa M. Rolle, Traub LiebermanMs. Rolle may be contacted at
lrolle@tlsslaw.com
Digitalizing the Hospital Design Requirements Process
April 02, 2019 —
Aarni Heiskanen - AEC BusinessDecisions made at the early stages of a hospital project can have a huge impact on its life cycle value. To make sure that a hospital will be a good investment, its future users should be involved in helping set out the design requirements. A Finnish team of experts wanted to see if they could improve the process and set up an experiment to see how it could be done digitally.
Currently, over one billion euros are budgeted to hospital construction and renovation in Finland. Globally, the sum is around US$400 billion. You would imagine that the design for such large investments would be very efficient from the start. Unfortunately, that is not the case.
During the design phase, doctors, specialists, nurses, and other stakeholders take part in workshops in which they express their needs and requirements. For a large hospital project, 40 to 100 workshops are the norm. The work is done with a variety of tools, with sticky notes being the predominant technique.
Read the court decisionRead the full story...Reprinted courtesy of
Aarni Heiskanen, AEC BusinessMr. Heiskanen may be contacted at
aec-business@aepartners.fi
Court Finds that Subcontractor Lacks Standing to Appeal Summary Judgment Order Simply Because Subcontractor “Might” Lose at Trial Due to Order
May 03, 2021 —
Garret Murai - California Construction Law BlogCases sometimes take unanticipated twists and turns. Atlas Construction Supply, Inc. v. Swinerton Builders, Case No. D076426 (January 26,2021), involving a tragic construction accident, a motion for summary judgment, a motion for good faith settlement, and a stipulated dismissal, is one of those cases.
The Accident
Swinerton Builders was the general contractor on a residential construction project in San Diego, California. Swinerton contracted with J.R. Construction, Inc. to perform concrete work and with Brewer Crane & Rigging, Inc. to perform crane work on the project. J.R. Construction in turn rented a concrete column formwork approximately 10 feet tall and weighing 300 to 400 pounds from Atlas Construction Supply, Inc.
One day on the construction project, Marcus Develasco, Sr. and another co-worker, employees of J.R. Construction, climbed to the top of the formwork to adjust its size. The formwork, which had been positioned on the site by Brewer, was upright but unsupported by braces. When the co-worker stepped off the formwork, Develasco’s weight caused the unsecured formwork to topple over, killing Develasco in the process.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
Judge Halts Sale of Brazilian Plywood
June 06, 2022 —
Beverley BevenFlorez – CDJ StaffA permanent injunction was issued by Judge Roy Altman in a Ft. Lauderdale federal court on May 24th that requires the revocation of all PS 1 certificates that were issued by PFS-TECO to more than a dozen Brazilian mills that produced structural plywood for the U.S. market,
reported Business Wire.
“This case highlights how a few bad actors profited by essentially looking the other way while substandard, and potentially dangerous plywood was imported into the U.S. and used to build homes and businesses,”
Michael Haglund, counsel representing the U.S. Structural Plywood Integrity Coalition, of Haglund Kelley, LLP, told Business Wire.
Building codes throughout the U.S. require the use of PS 1 structural plywood in construction. "If product standards are not being met, there can be serious implications for all homes constructed using those substandard wood panel products," Tyler Freres, VP of Sales for
Freres Engineered Wood, told CDJ. "Contractors and homeowners should be able to trust that U.S. certification agencies are doing their due diligence to accurately inspect panels, ensuring consumers' health and safety."
The U.S. Structural Plywood Integrity Coalition, including nine family-owned U.S. plywood manufacturers, alleged that PFS-TECO falsely certified that plywood from Brazil met U.S. structural integrity requirements. This substandard plywood has been used throughout the U.S. In particular, it was used during the hurricane reconstruction efforts in Florida and Puerto Rico due to its cheaper price. In 2021, Brazilian plywood made up 11% of the U.S. supply with
nearly 1.2 billion square feet sold.
Read the court decisionRead the full story...Reprinted courtesy of
Return-to-Workplace Checklist: Considerations and Emerging Best Practices for Employers
July 20, 2020 —
Nancy Conrad & George C. Morrison - White and Williams LLPAs employers plan to return employees to the workplace, they should proceed with careful planning and incorporate best practices and measures to assure a safe, responsible and productive workplace. While there is no "one size fits all" plan, the following checklist will assist in assuring that your work environment includes the key safety components to return to the workplace in the midst of a pandemic.
PREPARING THE WORKPLACE FOR RETURN & GENERAL HEALTH AND SAFETY
- Create a company task force, safety committee or coordinator to oversee implementation of policies that address and enforce practices related to COVID-19.
- Ensure HVAC systems are functional, have been properly cleaned and serviced and tuned to maximize airflow and filtration.
- Review and increase cleaning protocols in coordination with lease terms and cleaning contracts. Ensure regular and thorough office cleanings, with a focus on high-touch surfaces and areas. Document cleaning protocols and schedule.
- Implement social distancing requirements and provide visual markers on floors in compliance with applicable federal, state and local orders.
- Rearrange work spaces, conference rooms and lunchrooms to comply with social distancing requirements.
- Post notices about the number of individuals permitted in elevators, stairwells, rooms and on the premises.
- Restrict movement between departments and floors.
Reprinted courtesy of
Nancy Conrad, White and Williams LLP and
George C. Morrison, White and Williams LLP
Ms. Conrad may be contacted at conradn@whiteandwilliams.com
Mr. Morrison may be contacted at morrisong@whiteandwilliams.com
Read the court decisionRead the full story...Reprinted courtesy of
Making Construction Innovation Stick
February 22, 2018 —
Tom Sawyer, Jeff Rubenstone, and Scott Lewis – ENRIntegrating innovations into construction workflows—rather than serially testing, piloting and discarding them—is a definition of success. Yet few innovations—even ones that shine in trials—are absorbed into practice. Many just quietly go away, sending the work of vetting and testing them down the drain. That leaves some firms wondering if most construction technology innovation efforts are a waste of time.
Reprinted courtesy of Engineering News-Record authors
Tom Sawyer,
Jeff Rubenstone and
Scott Lewis
Mr. Sawyer may be contacted at sawyert@enr.com
Mr. Rubenstone may be contacted at rubenstonej@enr.com
Mr. Lewis may be contacted at lewisw@enr.com
Read the court decisionRead the full story...Reprinted courtesy of