Does a Contractor (or Subcontractor) Have to Complete its Work to File a Mechanics Lien
January 10, 2018 —
Wally Zimolong - Zimolong LLCYes. There seems to be common misconception that a contractor, subcontractor, or supplier, has six months
from its last day of work on the project to file a mechanics lien. I frequently see mechanics liens whereby the claimant states “Claimants last day of work on the project was X.” However, Section 1502 (49 P.S. Section 1502) of the Pennsylvania Mechanics Lien is clear that a lien must be filed within six month of “the completion of his work.” Under the Lien Law, “completion of the work” is a defined term and means “means performance of the last of the labor or delivery of the last of the materials required by the terms of the claimant’s contract or agreement, whichever last occurs.”
Read the court decisionRead the full story...Reprinted courtesy of
Wally Zimolong, Zimolong LLCMr. Zimolong may be contacted at
wally@zimolonglaw.com
ACEC Research Institute Releases New Engineering Industry Forecast
December 13, 2021 —
American Council of Engineering CompaniesWashington, DC, Dec. 09, 2021 (GLOBE NEWSWIRE) -- Today, the ACEC Research Institute released two new reports on the Engineering and Design Services industry: the 2021 Economic Assessment of the Engineering and Design Services Industry and a new Engineering Business Sentiment report for Q4 2021.
The data shows the industry has rebounded from project postponements due to COVID, though firms identify a tight labor market and lack of qualified workers as continued barriers to growth across public and private markets.
This is the second annual release of the Engineering and Design Services industry assessment, which tracks the industry's economic contributions, analyzes key economic drivers, and forecasts industry growth.
Snapshot of the Engineering and Design Services Industry:
1.5 million direct full- and part-time jobs
$97,300 average yearly wages
$338 billion in industry sales
$198 billion direct economic contribution
$105 billion collected in total federal, state & local tax
Both reports, the 2021 Economic Assessment of the Engineering and Design Services Industry and the Engineering Business Sentiment report for Q4 2021, are available for download by clicking
here.
###
The ACEC Research Institute is the research arm of the American Council of Engineering Companies – the business association of the nation's engineering industry. The ACEC Research Institute's mission is to deliver knowledge and business strategies that guide and elevate the engineering industry and to be the leading source of knowledge and thought leadership for creating a more sustainable, safe, secure and technically advanced built environment. For more information, go to www.acecresearchinstitute.org.
Read the court decisionRead the full story...Reprinted courtesy of
New Safety Standards Issued by ASSE and ANSI
March 28, 2012 —
Melissa Brumback, Construction Law in North CarolinaThe American National Standards Institute (ANSI) and the American Society of Safety Engineers (ASSE) have recently announced their approval of two new safety standards to enhance construction site safety.
The two new standards, which are set to take effect during June 2012, are the ANSI/ASSE A10.1-2011 Pre-Project and Pre-Task Safety and Health Planning for Construction and Demolition Operations, and the ANSI/ASSE A10.26-2011 Emergency Procedures for Construction and Demolition Sites.
The new A10.1-2011 standard was designed to assist construction owners, contractors, and designers by ensuring that safety and health planning were standard parts of their pre-construction planning. It is also intended to help owners of construction sites to establish a process for evaluating constructor candidates with regard to their safety and health performance planning.
The A10.26 standard applies to emergency situations, including fires, collapses, and hazardous spills. The standard deals with emergency rescue, evacuation, and transportation of injured workers, and also plans for coordinating with emergency medical facilities ahead of potential disasters.
Read the full story…
Reprinted courtesy of Melissa Dewey Brumback of Ragsdale Liggett PLLC. Ms. Brumback can be contacted at mbrumback@rl-law.com.
Read the court decisionRead the full story...Reprinted courtesy of
Terminating the Notice of Commencement (with a Notice of Termination)
July 19, 2017 —
David Adelstein - Florida Construction Legal UpdatesThe notice of commencement is important for purposes of construction lien priority. Stock Bldg. Supply of Florida, Inc. v. Soares Da Costa Const. Services, LLC, 76 So.3d 313, 317 (Fla. 3d DCA 2011) (“[A] notice of commencement serves to determine the priority of liens under the Construction Lien Law.”). A lien relates back in time to the date the notice of commencement was recorded assuming the notice of commencement is still in effect when the lien is recorded (or an amended noticed of commencement is recorded). Lien priority is very important and the reason why a contractor should always want to ensure there is an effective notice of commencement in place rather than an expired notice of commencement.
For the same reasons why a contractor wants to ensure there is an effective notice of commencement, there are times an owner wants to terminate a notice of commencement. An owner may want to terminate the potential priority of a construction lien. For instance, say the owner is refinancing or obtaining a construction loan in the midst of construction. A lender will want to ensure its mortgage maintains first priority and certainly priority over a potential construction lien. Otherwise, why would a lender finance the construction if it does not maintain first priority. It generally will not. Thus, an owner needs to terminate the notice of commencement so that the closing occurs on the loan and the mortgage recorded before a new notice of commencement is recorded and construction continues.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Florida Construction Legal UpdatesMr. Adelstein may be contacted at
Dadelstein@gmail.com
How the New Dropped Object Standard Is Changing Jobsite Safety
January 02, 2019 —
Derek Rose - Construction ExecutiveIn the United States, a dropped object injures a worker every 11 minutes—equating to nearly 50,000 cases every year. For those who seek medical treatment for these types of injuries, it can cost an average of $42,000. In fact, 5 percent of all fatalities on jobsites are due to falling objects, according to the Bureau of Labor Statistics.
These statistics highlight the overwhelming importance of dropped object prevention. OSHA already identifies dropped object incidents under the category of “Struck by Object” in its widely recognized “Fatal Four” list of the four leading causes of fatalities in the construction industry.
Reprinted courtesy of
Derek Rose, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Georgia Court Reaffirms Construction Defect Decision
August 27, 2013 —
CDJ STAFFIn 2011, the Georgia Supreme Court ruled that construction defects could count as “occurrences” under a general liability policy. John Watkins, writing in Law360, notes that the ruling “has potentially broad implications for Georgia insureds.” He goes on to look at a later Georgia Supreme Court case, in which the court reaffirmed its decision in the 2011 Hathaway case.
In the 2013 case, Taylor Morrison Services Inc. v. HDI-Gerlins Ins., the court held that the property damage had to happen to something other than the work performed by the insured, and that a breaches of warranty without fraud claims may be covered. But Watkins notes that this points to “the continuing efforts of insurers to deny coverage for construction defects under CGL policies.”
This overruled some of the past decisions of the United States District Court for the Northern District of Georgia. Watkins noted that the Eleventh Circuit seemed to wonder about the scope of Hathaway, but with Taylor Morrison, “the Georgia Supreme Court provided a clearly stated response.”
Looking at the implications, he gives an example in which if a window installer work causes a window to leak and the water intrusion damages a floor, the floor, but not the window would be covered. But he cautions, “the result may turn on the policy language and the particular facts.” In any case, he assures us that “coverage disputes regarding construction defects are sure to continue.”
Read the court decisionRead the full story...Reprinted courtesy of
The Partial Building Collapse of the 12-Story Florida Condo
June 28, 2021 —
Beverley BevenFlorez – CDJ StaffOn Thursday, the Champlain Towers South Condo building in Surfside, Florida suffered a partial collapse. As of Monday morning, the official death toll stood at 10 with 151 persons unaccounted for, according to the Miami Herald.
NPR uncovered minutes from a November 15th, 2018 Chaplain Tower South Condominium Association board meeting where the inspector made assurances that “the building was ‘in very good shape.’” However, “an
engineering report from five weeks earlier” alleged “that failed waterproofing in a concrete structural slab needed to be replaced ‘in the near future.’” Daniella Levine Cava, the Miami-Dade County mayor, told reporters that “officials ‘knew nothing’ about the report.”
The New York Times on Sunday reported that experts looking at video footage of the incident believe that the cause is centered on a location “in the lowest part of the condominium complex — possibly in or below the underground parking garage — where an initial failure could have set off a structural avalanche.” The cause of the incident remains unclear, however. This “progressive collapse” could have been caused by a number of different factors “including design flaws or the less robust construction allowed under the building codes of four decades ago.”
A witness, according to the New York Times, saw a hole appear near the pool: “Michael Stratton said his wife, Cassie Stratton, who is missing, was on the phone with him and was looking out through the window of her fourth-floor unit when, she told him, the hole appeared. After that, the call cut off.”
Possible reasons for the “initial failure at the bottom of the building could include a problem with the deep, reinforced concrete pilings on which the building sits — perhaps set off by an unknown void or a sinkhole below — which then compromised the lower columns. Or the steel reinforcing the columns in the parking garage or first few floors could have been so corroded that they somehow gave way on their own. Or the building itself could have been poorly designed, built with substandard concrete or steel — or simply with insufficient steel at critical points.”
"It will take many months to complete the analysis necessary to understand the cause or causes of the collapse,” Eric Ruzicka, a partner at the international law firm Dorsey & Whitney and a commercial litigator who specializes in the area of construction and real estate litigation, stated in a media release. “Often, information that comes out early can be very misleading or misunderstood unless the full context of the information is known.”
Ruzicka explained that Florida’s statues of limitations and repose may be relevant. “These statutes will likely eliminate the liability of those involved in the original development, design and construction of the building. Rather, victims and their families' recovery will be limited to those involved in the building's maintenance and those assessing the condition of the building over the past four years.”
Miami and Sunny Isles Beach have announced they will audit older structures in their communities “ahead of the mandatory 40-year recertification,” the Miami Herald reported.
Read the full story (Miami Herald)...
Read the full story (NPR)...
Read the full story (NY Times)...
Read the court decisionRead the full story...Reprinted courtesy of
Insurance Law Alert: California Appeals Court Allows Joinder of Employee Adjuster to Bad Faith Lawsuit Against Homeowners Insurer
April 08, 2014 —
Valerie A. Moore and Christopher Kendrick - Haight Brown & Bonesteel LLPIn Bock v. Hansen (No. A136567, filed 4/2/14), a California appeals court held that an adjuster employed by an insurer can be sued personally for falsely representing that a first party claimant's policy does not cover a loss.
In Bock, a 41-foot long, 7,300 pound tree limb crashed onto the insureds' home, damaging the roof, chimney, living room walls, windows and floors. The assigned adjuster was alleged to have engaged in "appalling" conduct, including instructing the insureds to clean up the damage themselves (leading to personal injury); denying that the tree cracked the chimney; insulting and disparaging the insureds; altering the scene before taking photographs; misrepresenting the terms of the policy; preparing false claim reports; conspiring with a contractor to prepare an intentionally false report; and knowingly relying on the false report in order to deny a legitimate claim.
The homeowners sued the insurer and named the adjuster personally on causes of action for negligent misrepresentation and intentional infliction of emotional distress. But the adjuster demurred arguing that he could not be sued personally because, as an employee of the insurer, he owed no duty to the insureds. The adjuster relied on Sanchez v. Lindsey Morden Claims Services, Inc. (1999) 72 Cal.App.4th 249 and Lippert v. Bailey (1966) 241 Cal.App.2d 376, to argue that employees and agents of insurers cannot be held personally liable since, under the law of agency, the proper cause of action is against the principal and not the agent.
Reprinted courtesy of
Valerie Moore, Haight Brown & Bonesteel LLP and
Christopher Kendrick, Haight Brown & Bonesteel LLP
Ms. Moore may be contacted at vmoore@hbblaw.com; Mr. Kendrick may be contacted at ckendrick@hbblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
