BERT HOWE
  • Nationwide: (800) 482-1822    
    hospital construction building expert Fairfield Connecticut low-income housing building expert Fairfield Connecticut production housing building expert Fairfield Connecticut Medical building building expert Fairfield Connecticut institutional building building expert Fairfield Connecticut office building building expert Fairfield Connecticut condominium building expert Fairfield Connecticut parking structure building expert Fairfield Connecticut casino resort building expert Fairfield Connecticut housing building expert Fairfield Connecticut mid-rise construction building expert Fairfield Connecticut custom homes building expert Fairfield Connecticut custom home building expert Fairfield Connecticut Subterranean parking building expert Fairfield Connecticut townhome construction building expert Fairfield Connecticut landscaping construction building expert Fairfield Connecticut high-rise construction building expert Fairfield Connecticut retail construction building expert Fairfield Connecticut concrete tilt-up building expert Fairfield Connecticut structural steel construction building expert Fairfield Connecticut multi family housing building expert Fairfield Connecticut condominiums building expert Fairfield Connecticut
    Fairfield Connecticut building consultant expertFairfield Connecticut construction defect expert witnessFairfield Connecticut construction forensic expert witnessFairfield Connecticut construction expert witness consultantFairfield Connecticut building envelope expert witnessFairfield Connecticut construction project management expert witnessFairfield Connecticut construction scheduling expert witness
    Arrange No Cost Consultation
    Building Expert Builders Information
    Fairfield, Connecticut

    Connecticut Builders Right To Repair Current Law Summary:

    Current Law Summary: Case law precedent


    Building Expert Contractors Licensing
    Guidelines Fairfield Connecticut

    License required for electrical and plumbing trades. No state license for general contracting, however, must register with the State.


    Building Expert Contractors Building Industry
    Association Directory
    Home Builders & Remo Assn of Fairfield Co
    Local # 0780
    433 Meadow St
    Fairfield, CT 06824

    Fairfield Connecticut Building Expert 10/ 10

    Builders Association of Eastern Connecticut
    Local # 0740
    20 Hartford Rd Suite 18
    Salem, CT 06420

    Fairfield Connecticut Building Expert 10/ 10

    Home Builders Association of New Haven Co
    Local # 0720
    2189 Silas Deane Highway
    Rocky Hill, CT 06067

    Fairfield Connecticut Building Expert 10/ 10

    Home Builders Association of Hartford Cty Inc
    Local # 0755
    2189 Silas Deane Hwy
    Rocky Hill, CT 06067

    Fairfield Connecticut Building Expert 10/ 10

    Home Builders Association of NW Connecticut
    Local # 0710
    110 Brook St
    Torrington, CT 06790

    Fairfield Connecticut Building Expert 10/ 10

    Home Builders Association of Connecticut (State)
    Local # 0700
    3 Regency Dr Ste 204
    Bloomfield, CT 06002

    Fairfield Connecticut Building Expert 10/ 10


    Building Expert News and Information
    For Fairfield Connecticut


    New FAR Rule Mandates the Use of PLAs on Large Construction Projects

    Pinnacle Controls in Verano

    Massachusetts Pulls Phased Trigger On Its Statute of Repose

    Hake Law Attorneys Join National Law Firm Wilson Elser

    Will Superusers Future-Proof the AEC Industry?

    The New Industrial Revolution: Rebuilding America and the World

    Commercial Real Estate in 2023: A Snapshot

    Actual Cost Value Includes Depreciation of Repair Labor Costs

    Supply Chain Delay Recommendations

    Will COVID-19 Permanently Shift the Balance between Work from Home and the Workplace?

    AI in Construction: What Does It Mean for Our Contractors?

    Traub Lieberman Partner Bradley T. Guldalian Wins Summary Judgment

    Builders Can’t Rely on SB800

    Patent or Latent: An Important Question in Construction Defects

    Natural Hydrogen May Seem New in Town, but It’s Been Here All Along

    BHA has a Nice Swing Benefits the Wounded Warrior Project

    Contractor’s Coverage For Additional Insured Established by Unilateral Contract

    L.A. Makes $4.5 Billion Bet on Olympics After Boston Backs Out

    Norristown, PA to Stop Paying Repair Costs for Defect-Ridden Condo

    Construction Law Job Opps and How to Create Them

    Other Colorado Cities Looking to Mirror Lakewood’s Construction Defect Ordinance

    Montana Significantly Revises Its Product Liability Laws

    Oracle Sues Procore, Claims Theft of Trade Secrets for ERP Integration

    Miller Law Firm Helped HOA Recover for Construction Defects without Filing a Lawsuit

    Court of Appeals Confirms that King County Superior Court’s Jury Selection Process Satisfies Due Process Requirements

    Contractor Sues License Board

    New York Court Holds That the “Lesser of Two” Doctrine Limits Recoverable Damages in Subrogation Actions

    Congratulations to Partner Alex Giannetto for Being Named to San Diego Business Journal’s Top 100 Leaders in Law List

    The Secret to Success Is Doing Things a Little Bit Differently

    North Miami Beach Rejects as Incomplete 2nd Engineering Inspection Report From Evacuated Condo

    UK Agency Seeks Stricter Punishments for Illegal Wastewater Discharges

    Peru’s Former President and His Wife to Stay in Jail After Losing Appeal

    Gordie Howe Bridge Project Team Looks for a Third Period Comeback

    The Contingency Fee Multiplier (For Insurance Coverage Disputes)

    California Insurance Commissioner Lacks Authority to Regulate Formula for Estimating Replacement Cost Value

    California Team Secures Appellate Victory on Behalf of Celebrity Comedian Kathy Griffin in Dispute with Bel Air Neighbor

    The 2017 ASCDC and CDCMA Construction Defect Seminar and Holiday Reception

    The Problem With Building a New City From Scratch

    A Retrospective As-Built Schedule Analysis Can Be Used to Support Delay

    Denver Officials Clamor for State Construction Defect Law

    If I Released My California Mechanics Lien, Can I File a New Mechanics Lien on the Same Project? Will the New Mechanics Lien be Enforceable?

    Weyerhaeuser Leaving Home Building Business

    Lien Actions Versus Lien Foreclosure Actions

    Risk Transfer: The Souffle of Construction Litigation

    Earth Movement Exclusion Bars Coverage

    Balancing Risk and Reward: The Complexities of Stadium Construction Projects

    Performance Bonds: Follow the Letter of the Bond and Keep The Surety Informed

    Guessing as to your Construction Damages is Not the Best Approach

    Report to Congress Calls for Framework to Cut Post-Quake Recovery Time

    Lenders and Post-Foreclosure Purchasers Have Standing to Make Construction Defect Claims for After-Discovered Conditions
    Corporate Profile

    FAIRFIELD CONNECTICUT BUILDING EXPERT
    DIRECTORY AND CAPABILITIES

    The Fairfield, Connecticut Building Expert Group is comprised from a number of credentialed construction professionals possessing extensive trial support experience relevant to construction defect and claims matters. Leveraging from more than 25 years experience, BHA provides construction related trial support and expert services to the nation's most recognized construction litigation practitioners, Fortune 500 builders, commercial general liability carriers, owners, construction practice groups, and a variety of state and local government agencies.

    Building Expert News & Info
    Fairfield, Connecticut

    L.A. Mixes Grit With Glitz in Downtown Revamp: Cities

    May 13, 2014 —
    Near streets so gritty they were used as the backdrop for a shootout in the next “Fast & Furious” movie, million-dollar condos and $38 racks of lamb beckon the urban pioneers of Los Angeles. The rehab of warehouses and factories in the Arts District is the latest wave in a revival transforming the core of the second-largest U.S. city. Since 2011, about $7 billion has been poured into downtown. A decade ago its most prominent residents were the homeless. Now condos sell for a median of $523.36 a square foot -- more than in Beverly Hills. Alma, Bon Appetit magazine’s best new U.S. restaurant in 2013, is a few blocks from the convention center the city plans to renovate. “All of a sudden, overnight, you have more cranes going up in downtown L.A. than any other neighborhood in Southern California, by far,” said Lew Horne, head of the regional CBRE Real Estate Group Inc. (CBG) office. Mr. Nash may be contacted at jnash24@bloomberg.net; Ms. Brandt may be contacted at nbrandt@bloomberg.net Read the court decision
    Read the full story...
    Reprinted courtesy of James Nash and Nadja Brandt, Bloomberg

    Litigation Privilege Saves the Day for Mechanic’s Liens

    November 23, 2020 —
    In RGC Gaslamp v. Ehmcke Sheet Metal Co., the Fourth Appellate District held that a trial court properly granted an anti-SLAPP motion because the recording of a mechanic’s lien is protected by the litigation privilege. In RGC Gaslamp, subcontractor Ehmcke Sheet Metal Company (“Ehmcke”) recorded a mechanic’s lien to recoup payment due for sheet metal fabrication and installation done at a luxury hotel project in downtown San Diego. Project owner RGC Gaslamp, LLC (“RGC”) recorded a release bond for the lien. Thereafter, Ehmcke recorded three successive mechanic’s liens identical to the first, prompting RGC to sue it for quiet title, slander of title, and declaratory and injunctive relief. After retaining California counsel, Ehmcke then released its liens and advised it did not intend to record any more. Ehmcke then filed a special motion to strike under the anti-SLAPP statute (Code Civ. Proc. § 425.16.) which was granted. Reprinted courtesy of Stephen M. Tye, Haight Brown & Bonesteel LLP and Lawrence S. Zucker II, Haight Brown & Bonesteel LLP Mr. Tye may be contacted at stye@hbblaw.com Mr. Zucker may be contacted at lzucker@hbblaw.com Read the court decision
    Read the full story...
    Reprinted courtesy of

    Insureds' Experts Insufficient to Survive Insurer's Motion for Summary Judgment

    October 17, 2023 —
    The magistrate recommended that insurer's motion for summary judgment be granted due to the insureds' expert's inability to present genuine issues of material fact. Walker v. Century Sur. Co., 2023 U.S. Dist. LEXIS 142408 (E.D. Texas July 17, 2023). The insureds' property sustained damage from Hurricane Laura. Colonial Claims inspected the property for Century and reported that a portion of the roof was damaged by the hurricane. Century paid insureds $2,212,34. Van Fisher, an engineer with Envista Forensics, then inspected the interior of the property on Century's behalf. Fisher reported that there was some covered interior damage caused by a leak from a storm-created opening in the roof. However, Fisher further reported that there was other interior damage caused by existing water leaks not attributed to the hurricane and thus not covered by the policy. Century then paid the insureds an additional $485.05 based on Fisher's inspection. Read the court decision
    Read the full story...
    Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
    Mr. Eyerly may be contacted at te@hawaiilawyer.com

    Affordable Housing, Military Contracts and Mars: 3D Printing Construction Potential Builds

    September 05, 2022 —
    The 3D printing construction market is likely on the cusp of a boom. This unique construction method boasts many advantages in comparison to traditional forms of construction. Projects can be completed more quickly and at a fraction of the cost, given fewer laborers are required and the materials used are much cheaper. Though market growth stalled during the COVID-19 pandemic, industry leaders expect 3D printing construction to experience exponential growth in the coming years. While 3D printing technology has risen in popularity and prominence in the past couple of decades, it is only recently that 3D printing companies have begun making strides in the construction industry. Critical to the construction process is the software that is used to create and model the planned structure. A software program turns a building’s blueprint into code that then dictates the movement of a 3D printer on the construction site. After a concrete-like mix is loaded into the printer, the printer begins to build the walls by laying one cylindrical layer of concrete at a time, in accordance with the blueprint. There is no one-size-fits-all approach in 3D printing construction: some companies print the core structure as well as the roof and floor of the structure, while others print only the core and shell and install those portions separately using traditional methods and materials. Reprinted courtesy of Adam J. Weaver, Pillsbury and Lindsey Mitchell, Pillsbury Mr. Weaver may be contacted at adam.weaver@pillsburylaw.com Read the court decision
    Read the full story...
    Reprinted courtesy of

    Hurricane Ian: Florida Expedites Road Work as Damage Comes Into Focus

    October 10, 2022 —
    Hurricane Ian’s devastation is coming into view days after the storm decimated southwest Florida. Work is underway to rebuild much of the state’s electrical, transportation and other infrastructure, with certain emergency road repairs expedited and restoration of power prioritized after the storm's devastation left millions in the dark and washed out roadways serving as the only access to barrier islands such as Sanibel Island and Pine Island. Reprinted courtesy of Derek Lacey, Engineering News-Record Mr. Lacey may be contacted at laceyd@enr.com Read the full story... Read the court decision
    Read the full story...
    Reprinted courtesy of

    The Power of Planning: Four Key Themes for Mitigating Risk in Construction

    November 09, 2020 —
    Construction is, and always has been, known as a relatively risky business. Whether it is dealing with factors that can be controlled or beyond control, proactively managing risk has proven to be of the most critical factors in delivering quality projects faster, more efficiently and with wider margins. Many people assume on-site activities introduce the greatest amount of uncertainty and potential risk. But many mistakes in construction originate in the planning phase – meaning preconstruction is ripe with opportunity to be the most effective place for mitigating risk, saving money and ultimately broadening margins. There are many ways to mitigate risk before projects even start, but four key themes emerge to be clear, repeatable opportunities for success. DIGITIZE THE PLANNING PHASE Preconstruction is where ideas are brought to life by translating architectural designs into a real, constructible plan. Decisions made at this stage can determine the project’s success and profitability – but it’s far from straightforward. Estimating, scheduling and planning are highly complex activities that depend on constantly changing details and are all areas where missed information or miscommunication can lead to costly rework down the line. Reprinted courtesy of Zac Hays, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
    Read the full story...
    Reprinted courtesy of

    Wheaton to Require Sprinklers in New Homes

    November 06, 2013 —
    The town of Wheaton, Illinois is considering a change to its building codes, based on the recommendations made in the 2012 building code, released by the International Code Council. Eighty-two towns in Illinois already require new homes to have fire sprinklers. Wheaton did not adopt any changes from the 2006 or 2009 building code; they are currently using the standards of the 2003 edition. Read the court decision
    Read the full story...
    Reprinted courtesy of

    Musk Says ‘Chicago Express’ Tunnel Project Could Start Work in Months

    August 14, 2018 —
    Technology guru Elon Musk beat three other construction proposals on June 14 to win the exclusive right to negotiate a design-build-operate-maintain contract with the City of Chicago to provide a high-speed underground passenger transport system between the downtown Loop area and O’Hare Airport. He proposes a one-way trip of about 12 minutes at 150 mph compared with the current 40-minute average by rail or car. Read the court decision
    Read the full story...
    Reprinted courtesy of Jeff Yoders, ENR
    Mr. Yoders may be contacted at yodersj@enr.com