What’s in a Name? Trademarks and Construction
April 25, 2022 —
Carol Wilhelm and J.P. Vogel - Construction ExecutiveEvery company, no matter the industry, relies on its name and reputation to develop customers and generate revenue. Think about the brands that dominate American culture such as Nike, Wal-Mart, Amazon or McDonald’s, then imagine those businesses without the ability to adequately protect their names, slogans and logos. No doubt the vultures would circle and brand power would most likely become short lived or otherwise diluted to the point of non-existence. The construction industry is not exempt, and the industry leaders benefit from identifiable names and logos, built over years of reputation and brand building. While the tools necessary to protect your company’s brand exist at the state and federal level, many business owners or leaders are unfamiliar with the trademark process and unaware of the consequences of not utilizing those tools.
Trademark Registration
Trademarks are “concise and unequivocal identifiers” that provide potential customers with essential information about your business. With a single word, tagline, logo, color—essentially anything that can carry meaning—potential customers learn to associate particular product or service characteristics and expected quality level with a particular source. That is, your mark is the way that consumers connect your expertise and reputation to your business and nobody else’s. It serves a critical role in reducing consumer search costs and capturing your hard-earned business opportunities.
Reprinted courtesy of
Carol Wilhelm and J.P. Vogel, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Mr. Vogel may be contacted at jpvogel@grayreed.com
Ms. Wilhelm may be contacted at cwilhelm@grayreed.com
Read the court decisionRead the full story...Reprinted courtesy of
Port Authority Reaches Deal on Silverstein 3 World Trade
June 26, 2014 —
David M. Levitt – BloombergThe Port Authority of New York and New Jersey approved a financing agreement for Larry Silverstein’s 3 World Trade Center that allows him to use $159 million of insurance proceeds to expedite construction.
The agreement, which alters a 2010 deal on the project, follows about a year of negotiations and provides Silverstein with far less than the $1.2 billion of loan guarantees he sought under a previous plan that had been opposed by some board members. Silverstein plans to seek private financing to complete construction on the tower, which is stalled at eight floors.
The Port Authority, which owns the Trade Center site, unanimously approved the alterations to the agreement at a meeting today. The new deal meets the criteria of not creating additional debt for the agency, said Commissioner Kenneth Lipper, who led opposition to the loan guarantee, viewing it as too risky and a threat to the authority’s credit rating.
Read the court decisionRead the full story...Reprinted courtesy of
David M. Levitt, BloombergMr. Levitt may be contacted at
dlevitt@bloomberg.net
What if the "Your Work" Exclusion is Inapplicable? ISO Classification and Construction Defect Claims.
February 14, 2023 —
David Humphreys - Carson Law Group, PLLCThis article was first published by the National Association of Home Builders (NAHB) on their NAHBNow blog
One of the risks faced by a residential builder is that, following completion of construction, the homeowner may assert a claim against the builder for damage to the home caused by an alleged construction defect. One of the ways a builder manages the risk of such construction defect claims is by purchasing commercial general liability (“CGL”) insurance.
A builder’s CGL policy covers those sums the builder is legally obligated to pay as damages because of bodily injury or property damage caused by an “occurrence,” that is, damage that is accidental rather than being expected or intended by the builder, so long as the claim does not fall within any of the policy’s several “exclusions” from coverage.
When faced with a construction defect lawsuit, our builder clients are often surprised—and dismayed—when their CGL insurer denies coverage and refuses to defend the builder. However, builders shouldn’t take their insurer’s denial of coverage at face value. This article discusses a new argument we recently discovered that has been a game-changer for our builder clients who were denied coverage in construction defect cases.
Whether coverage exists always depends on the specific language of the particular CGL policy, and courts generally construe exclusions against insurers. This allows experienced coverage attorneys to, at times, successfully challenge declinations of coverage and, at a minimum, convince insurers to pay for the builder’s defense.
A typical CGL policy provides products-completed operations coverage, which is sought by businesses that face potential liability arising out of the products that they have sold or operations that they have completed. Products-completed operations coverage allows builders to obtain many years of coverage for a completed project. Over the years, insurers have added to their policies modifications and exclusions that limit their exposure for claims that fall under that coverage.
Exclusion (l) or the “your work” exclusion, will often exclude coverage for a latent defect claim against the builder. A standard “your work” exclusion provides:
This insurance does not apply to: . . . “[p]roperty damage” to “your work” arising out of it or any part of it and included in the “products-completed operations hazard.”
This “your work” and similar exclusions are designed to limit coverage for business risks that are within the contractor’s own control; e.g., a claim that the contractor caused damage to the contractor’s own work. These exclusions apply both to ongoing and completed projects, which can leave a builder unprotected from lawsuits for years after a project is completed.
However, builders who are classified on the declarations page with Code 91580 Contractors— Executive Supervisors or Executive Superintendents, may not be subject to the “your work” exclusion. 91580 is a common classification assigned to builders during insurance underwriting. This classification falls into what is referred to as “dagger class” or “plus sign class,” which indicates that Products and/or Completed Operations coverage is
included as part of and not separate from the Premises/Operations coverage (emphasis added).
It has been noted that dagger” and “plus sign” classifications create confusion because of the seeming contradiction between policy wording and coverage rules.* The CGL policy seems to expressly exclude products and/or completed operations losses for “dagger” or “plus sign” classes. In the definitions section we find the following:
“Products-completed operations hazard”: . . .b. Does not Include “bodily Injury” or “property damage” arising out of:. . . (3) Products or operations for which the classification, listed In the Declarations or in a policy schedule, states that products- completed operations are subject to the General Aggregate Limit.”
This apparent exclusionary language, however, must be read in conjunction with the Insurance Services Office’s (ISO) Rule 25.F.1.:
Rule 25. CLASSIFICATIONS
F. Symbols
1. Plus Sign
A plus sign when shown in the Premium Base column under General Liability insurance in the Classification Table - means that coverage for Products and/or Completed Operations is included in the Premises/Operations coverage at no additional premium charge. When this situation applies, the classification described in the policy schedule or Declarations must state that:
“Products-completed operations are subject to the General Aggregate Limit” to provide Products and/or Completed Operations coverage(s).
When read together then, the exclusionary wording in the policy definition removes any product or operation loss subject to the “dagger” or “plus sign” classification from the definition of Products Completed Operations Hazard. Under the dagger or plus sign classification of Rule 25, coverage for products and/or operations is included in the premises operations coverage. Consequently, a loss can no longer be defined as a product completed loss, and as a result it is no longer subject to the “your work” exclusion.
Recall that the standard “your work” exclusion quoted above excludes coverage for “property damage” to “your work” “arising out of it or any part of it
and included in the “products-completed operations hazard”.” Here, we emphasize “and” because the “your work” exclusion applies only to property damage that is also included in the “products-completed operations hazard.” Since property damage claims arising under “plus sign” classifications are expressly excluded from the “products-completed operations hazard” (they are included in the premises/operations coverage) the “your work” exclusion simply does not apply. This means that, if your CGL insurer denies your construction defect claim based on the “your work” exclusion, do what the title of this article suggests: Check your ISO classification! If 91580 “Executive Supervisors or Executive Superintendents” is listed on your Declarations page, you may be in luck.
This new ISO classification-based coverage argument will likely also apply to other exclusions and endorsements that CGL insurers routinely rely on in denying coverage in construction defect cases. We recently successfully challenged a coverage denial based on the following “prior work” exclusionary endorsement:
”This insurance does not apply to ‘your products’ or ‘your work’ completed prior to” a certain date listed in the endorsement. . .
“Specifically, this insurance does not apply to. . . “property damage”. . . included in the ‘products-completed operations hazard’ and arising out of. . . ‘your work’ performed by or on behalf of you prior to the date shown above.”
Again, this endorsement incorporates the “products-completed operations hazard,” which allowed us to successfully argue that the exclusion was inapplicable to a builder classified as a 91580 “Executive Supervisor or Executive Superintendent.”
To our knowledge, this new ISO classification-based coverage argument has not yet been addressed by a court. Our recent successes with it have concluded with favorable settlements for our clients. Accordingly, for now, the ISO classification-based argument is a powerful new tool to challenge denials of coverage in construction defect cases where the builder is classified under 91580 “Executive Supervisors or Executive Superintendents.”
David Humphreys is a Partner at Carson Law Group, PLLC, and has been representing construction contractors, subcontractors, and owners for more than two decades in Mississippi and throughout the Southeast.
*See “Dagger” or Plus Symbol Classes: What They Mean, Chris Boggs - Virtual University | “Dagger” or Plus Symbol Classes: What They Mean) (independentagent.com)
Read the court decisionRead the full story...Reprinted courtesy of
Wildfire Insurance Coverage Series, Part 2: Coverage for Smoke-Related Damages
July 03, 2022 —
Scott P. DeVries & Yosef Itkin - Hunton Insurance Recovery BlogFor many policyholders, smoke emanating from wildfire causes as much if not more damage than the fire itself. In this post in the Blog’s Wildfire Insurance Coverage Series, we discuss damages caused by smoke emanating from wildfires.
Some insurers argue that policies are limited to fire damage to the insured property and do not include smoke damage associated with nearby fires. A treatise frequently cited by insurers states otherwise: “The concept that fire insurance covers non-fire damage which is the proximate result of fire finds application also when the fire occurs on other property and causes harm to the insured property. In such case, the harm to the insured property, even though it is a non-fire harm, has long been recognized to be the result of fire, and, therefore, within the policy coverage.”
[1]
Reprinted courtesy of
Scott P. DeVries, Hunton Andrews Kurth and
Yosef Itkin, Hunton Andrews Kurth
Mr. DeVries may be contacted at sdevries@HuntonAK.com
Mr. Itkin may be contacted at yitkin@HuntonAK.com
Read the court decisionRead the full story...Reprinted courtesy of
6,500 Bridges in Ohio Allegedly Functionally Obsolete or Structurally Deficient
June 17, 2015 —
Beverley BevenFlorez-CDJ STAFFThe Portsmouth Daily Times reported that U.S. Senator Sherrod Brown (D-OH) released a report that declared “6,500 bridges in Ohio are either functionally obsolete or structurally deficient as defined by the Federal Highway Administration (FHWA).” According to the Portsmouth Daily Times, the “FHWA defines Functionally Obsolete as a bridge that is no longer by design functionally adequate for its task” and “Structurally Deficient as a bridge that has one or more structural defects that require attention.” Brown’s solution to the issue is to pass a long-term transportation bill.
Read the court decisionRead the full story...Reprinted courtesy of
Loss Caused by Theft, Continuous Water Discharge Not Covered
September 17, 2015 —
Tred R. Eyerly – Insurance Law HawaiiThe insured's claim for loss based on theft and water leaks was not covered under the property policy. SJP Props. v. Mount Vernon Fire Ins. Co., 2015 U.S. Dist. LEXIS 97216 (E.D. Mo. July 27, 2015).
SJP Properties bought and sold foreclosed properties. On July 13, 2006, it purchased at a foreclosure sale a property in St. Louis. The property was not inspected before or after the purchase, and sat vacant for more than two years. No one checked regularly on the property.
The property was insured under a commercial property policy issued by Mount Vernon, effective from March 8, 2006 to March 8, 2009. The policy covered vandalism, but excluded loss caused by theft. An exception for the exclusion provided coverage for "building damage caused by the breaking in or exiting of burglars." The policy also excluded loss or damage caused by fungus, wet rot, dry rot and bacteria or water leaks for a period of 14 days or more.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Insurance Law HawaiiMr. Eyerly may be contacted at
te@hawaiilawyer.com
Contractors with Ties to Trustees Reaped Benefits from LA Community College Modernization Program
March 03, 2011 —
Gale Holland, Michael Finnegan and Doug Smith, Los Angeles TimesIn the latest installment of the “Billions To Spend” series of investigative reports focused on construction defects, management, and cost issues relevant to LACC’s Community College Modernization Projects, the LA Times examines the costs associated with the various layers of construction management and benefits that accrued to contractors with ties to LACC trustees.
The reporting by the Times is seemingly critical of the project’s utilization of “body shops” an industry term for companies that function as employers of record. The article segment published today cites a number of circumstances wherein their utilization appears to have escalated costs substantially.
“To gauge the cost of the staffing system, The Times reviewed thousands of pages of financial records from April 2007, when URS began managing the program, to July 2010. Reporters identified two dozen contractors serving as conduits for pay and benefits for employees they did not supervise.
At least 230 people were employed in this manner, at a total cost of about $40 million, the records show.
Approximately $18 million of the total was paid to the employees, according to the Times analysis. The remaining $22 million went to profit and overhead for contractors, the records indicate.
For employees on its own payroll, the district says that medical and other benefits increase compensation costs 40% above base salaries. So if the district had employed its construction staff directly, the total cost for the period studied would have been $25 million instead of $40 million, a savings of $15 million, The Times calculated.”
Read Full Story...
Read the court decisionRead the full story...Reprinted courtesy of
EPA Looks to Reduce Embodied Carbon in Materials With $160M in Grants
August 19, 2024 —
James Leggate - Engineering News-RecordThe U.S. Environmental Protection Agency estimates that construction materials used for buildings and built infrastructure account for more than 15% of global greenhouse gas emissions. The agency now hopes to boost adoption of materials with lower embodied emissions by offering $160 million in grants to better track and ultimately reduce climate pollution associated with those materials.
Reprinted courtesy of
James Leggate, Engineering News-Record
Mr. Leggate may be contacted at leggatej@enr.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
