Fourth Circuit Questions EPA 2020 Clean Water Act 401 Certification Rule Tolling Prohibition
August 10, 2021 —
Karen C. Bennett - Lewis BrisboisLast week, in North Carolina Department of Environmental Quality v. Federal Energy Regulatory Commission, the Fourth Circuit Court of Appeals suggested that Congress did not intend for the states, or tribes, to take final action on Clean Water Act (CWA) Section 401 applications within a year of filing. The opinion conflicts with the Environmental Protection Agency's (EPA) 2020 final rule that sought to limit state and tribal certifying authorities’ ability to delay federal projects through various tolling schemes. 85 Fed. Reg. 42210 (Jul. 13, 2020).
EPA’s rule, codified in existing regulations, states that the CWA imposes a strict one-year deadline for certification decisions, otherwise certification is waived. However, the Fourth Circuit’s view suggests that this waiver is not triggered in cases where the certifying authority has acted on the application, even if it takes longer than a year to make a final certification decision. The court ultimately decided the case on other grounds, leaving a resolution on the statutory interpretation question for another day.
Read the court decisionRead the full story...Reprinted courtesy of
Karen C. Bennett, Lewis BrisboisMs. Bennett may be contacted at
Karen.Bennett@lewisbrisbois.com
Water Leak Covered for First Thirteen Days
April 11, 2018 —
Tred R. Eyerly - Insurance Law HawaiiThe Florida Court of Appeals recently held the policy's exclusion for repeated water seepage over a period of fourteen days or more does not exclude loss caused by the seepage for the first thirteen days.
Hicks v. Am. Integrity Ins. Co. of Florida, 2018 Fla. App. LEXIS 2616 (Fla. Ct. App. Feb. 23, 2018). Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com
New York Court of Appeals Finds a Proximate Cause Standard in Additional Insured Endorsements
June 15, 2017 — Geoffrey Miller - Saxe Doernberger & Vita, P.C.
In The Burlington Insurance Company v. NYC Transit Authority, et al., No. 2016-00096, the New York Court of Appeals issued a landmark decision with regard to the meaning of “caused, in whole or in part, by” in the additional insured context. In a split decision, the court rejected Burlington Insurance Company’s argument that the language implied a “negligence” standard, but held that coverage was provided to the additional insured only where the named insured’s acts or omissions were the proximate cause of the injury:
While we [the majority] agree with the dissent that interpreting the phrases differently does not compel the conclusion that the endorsement incorporates a negligence requirement, it does compel us to interpret ‘caused, in whole or in part’ to mean more than ‘but for’ causation. That interpretation, coupled with the endorsement’s application to acts or omissions that result in liability, supports our conclusion that proximate cause is required here.[1]
Read the court decision
Read the full story...
Reprinted courtesy of Geoffrey Miller, Saxe Doernberger & Vita, P.C.
Mr. Miller may be contacted at gjm@sdvlaw.com
Maritime Law: An Albatross for Contractors Navigating Marine Construction
January 03, 2022 — Cindy Matherne Muller - ConsensusDocs
“Ah! Well a-day! When evil looks, Had I from old and young! Instead of the cross, the Albatross, About my neck was hung.” 1
Contractors and subcontractors performing construction over water may find themselves encountering maritime law for the first time. Like the ancient mariner’s encounter with an albatross in The Rime of the Ancient Mariner, a contractor may be able to use maritime law to safely guide it through rough seas, or, if not careful, a contractor may find itself with maritime law hung, like an albatross, around its neck. This article gives an overview of key maritime law issues to demystify this historical body of law and answers some basic questions.
What is admiralty jurisdiction?
The Constitution gives federal courts jurisdiction over all maritime cases. This jurisdiction gives litigants the opportunity to remove state court cases to federal court and to avoid a jury trial. The purpose of admiralty jurisdiction in federal court is to protect and ensure the uniform treatment of nationwide maritime commerce and extends to maritime contracts and accidents. Any contract which relates to the navigation, business, or commerce of the sea is a maritime contract. Even contracts with mixed obligations on land and sea can fall within admiralty jurisdiction – such as construction contracts with a waterborne component. Admiralty jurisdiction also extends to maritime accidents – those that occur on navigable waters and have a maritime nexus. Read the court decision
Read the full story...
Reprinted courtesy of Cindy Matherne Muller, Jones Walker LLP
Ms. Muller may be contacted at cmuller@joneswalker.com
Insurer’s Optional Appeals Process Does Not Toll Statute of Limitations Following Unequivocal Written Denial
September 22, 2016 — Christopher Kendrick & Valerie A. Moore – Haight Brown & Bonesteel LLP
In Vishva Dev, M.D., Inc. v. Blue Shield of Cal. (No. B270094, filed 8/31/16), a California appeals court confirmed that the unequivocal denial of a claim, in whole or in part, commences the running of the statute of limitations for suit on the claim, notwithstanding the insurer’s offer to reconsider on new or additional evidence.
Reprinted courtesy of Christopher Kendrick, Haight Brown & Bonesteel LLP and Valerie A. Moore, Haight Brown & Bonesteel LLP
Mr. Kendrick may be contacted at ckendrick@hbblaw.com
Ms. Moore may be contacted at vmoore@hbblaw.com
Read the court decision
Read the full story...
Reprinted courtesy of
Replacement of Defective Gym Construction Exceeds Original Cost
January 22, 2013 — CDJ STAFF
Austin, Texas has torn down a school gym, the Turner-Roberts Recreation Center at the Overton Elementary School, due to structural problems which became evident after the gym was completed four years ago. The cost of the new gym is $6.4 million, more than the cost of building the gym in the first place. The city is paying $3 million in repair costs with the rest of the money coming from the companies that designed and built the now demolished gym. According to the Austin Statesman, the total cost to the city will be about $8.6 million.
The Turner-Roberts Recreation Center cost $5.6 million to build, but soon after it opened, structural problems were discovered. Cracks formed in walls and glass doors buckled. The settlement with the designer, contractor, and engineering firm did not require the firms to admit fault as they paid $3.4 million to fix the situation. The Statesman was unable to get a breakdown of how much each firm paid. Tom Cornelius, president of the GSC, the architectural firm on the project told the Statesman that "the foundation issues were not caused by design defects."
Initially, the city sought to repair the gym, but early excavation determined that the defects were too extensive. In addition to the structural flaws, it was also determined that the HVAC system was faulty. Excavation also damaged plumbing work. Tearing down the gym turned out to be the most cost-effective response. Read the court decision
Read the full story...
Reprinted courtesy of
10 Safety Tips for General Contractors
October 09, 2018 — Eric Weisbrot – JW Surety Bonds
The construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decision
Read the full story...
Reprinted courtesy of
Bert L. Howe & Associates Brings Professional Development Series to Their Houston Office
May 19, 2014 — Beverley BevenFlorez-CDJ STAFF
BHA’s Professional Development Series provides seminar attendees with a heightened level of knowledge and understanding on a wide range of subjects covering construction and construction defect litigation, tailored to the unique needs of local counsel and insureds.
The next seminar in this series, THE RESIDENTIAL CONSTRUCTION PROCESS & CONSTRUCTION DEFECT LITIGATION, will be presented on June 13th.
This course has been approved for Minimum Continuing Legal Education credit by the State Bar of Texas Committee on MCLE in the amount of 1.0 credit hours, of which 0.0 credit hours will apply to legal ethics/professional responsibility credit.
The seminar will be presented by Don MacGregor, general contractor and project manager, at BHA’s Houston office during the noontime hour, and luncheon will be provided. As with all BHA Professional Development activities, there is no cost for participation.
Water intrusion through doors, windows and roofing systems, as well as soil and foundation-related movement, and the resultant damage associated therewith, are the triggering effects for the vast majority of homeowner complaints today and serve as the basis for most residential construction defect litigation.
The graphic and animation-supported workshop/lecture activity will focus on the residential construction process, an examination of associated damages most often encountered when investigating construction defect claims, and the inter-relationships between the developer, general contractor, sub trades and design professionals.
Typical plaintiff homeowner/HOA expert allegations will be examined in connection with those building components most frequently associated with construction defect and claims litigation.
The workshop will examine:
* Typical construction materials, and terminology associated with residential construction
* The installation process and sequencing of major construction elements, including interrelationship with other building assemblies
* The parties (subcontractors) typically associated with major construction assemblies and components
* The various ASTM standard testing protocols utilized to field test buildings
* An analysis of exposure/allocation to responsible parties
Attendance at THE RESIDENTIAL CONSTRUCTION PROCESS & CONSTRUCTION DEFECT LITIGATION seminar will provide the attendee with:
* A greater understanding of the terms and conditions encountered when dealing with common construction defect issues
* A greater understanding of contractual scopes of work encountered when reviewing construction contract documents
* The ability to identify, both quickly and accurately, potentially responsible parties
* An understanding of damages most often associated with construction defects, as well as a greater ability to identify conditions triggering coverage
* Assistance in the satisfaction of important continuing education requirements.
Course #: 901290467
Sponsor #: 14152
BHA Houston Office
800 Town & Country Blvd.
Suite 300
Houston, TX 77024
To register for the event, please email Don MacGregor at dmac@berthowe.com.
Read the court decision
Read the full story...
Reprinted courtesy of
