Fairfield Connecticut Building Expert Directory

Unpredictable Power Surges Threaten US Grid — And Your Home

April 08, 2024 — Naureen S Malik - Bloomberg
Paul LeBlanc was barefoot when he stepped outside that morning. He was taking the trash out when he saw the red glow of flames engulfing a nearby home. A former firefighter, LeBlanc grabbed his shoes before racing across the street. He smashed a window, then rushed inside. The only person believed to be home was a teenage boy who had already escaped, luckily with just minor burns. Alarms blared “fire” loudly, again and again, blasting from homes through the area. “I’ve been in buildings without protection before — I just wanted to make sure no one was stuck in there,” said LeBlanc, who spent more than three decades as a firefighter before retiring. The damage to the Alonge family’s four-bedroom home built in the early 1800s was so bad they haven’t been able to return since the blaze in June. The source of the conflagration in Waltham, Massachusetts, came from a facility about 2 miles west of the home. An electric substation, which had been dealing with a rodent infestation, had a sudden, unstable surge in voltage. Read the court decision
Read the full story...
Reprinted courtesy of Naureen S Malik, Bloomberg

Contractor Haunted by “Demonized” Flooring

December 14, 2020 — Garret Murai - California Construction Law Blog
The most un-Halloween of Halloweens has come and gone. If you ask me though, between COVID, protests, fires, hurricanes, the passing of a Supreme Court Justice, and one of the most hotly contested elections in U.S. history, we’ve had enough scares this year to make up for it and then some. In the next case, Sieg v. Registrar of Contractors, Case No. A156089 (September 28, 2020), 1st District Court of Appeal, one contractor, haunted by “demonized” flooring, and who couldn’t catch a break even with the talisman of a release of liability signed by the homeowner, can add one more to his list of reasons why 2020 needs to be relegated to the history books. The Sieg Case In January 2012, homeowners Dennis and Ana Torchia purchased wood flooring for their home in Windsor, California. Specifically, they selected Brazilian Ebony, an exotic species of unusually hard wood, for its appearance and durability. Read the court decision
Read the full story...
Reprinted courtesy of Garret Murai, Nomos LLP
Mr. Murai may be contacted at gmurai@nomosllp.com

Angela Cooner Named "Top Lawyer" by Phoenix Magazine in Inaugural Publication

October 10, 2022 — Angela L. Cooner - Lewis Brisbois
Phoenix, Ariz. (September 7, 2022) – Phoenix Partner Angela L. Cooner was recently recognized for her work in Commercial Litigation by Phoenix Magazine in its inaugural list of Top Lawyers. Ms. Cooner was named a Top Lawyer after Phoenix Magazine partnered with research firm Data Joe to collect and tally online survey results from local practicing attorneys. The survey asks respondents to provide the names of up to three attorneys they deem the best in 39 legal specialties. After the votes are tallied and the nominees are confirmed to be members of Valley-based firms and in good standing, the top 10-20% of vote-getters in each category are named to the Top Lawyers list. Ms. Cooner is a member of Lewis Brisbois’ Construction and General Liability Practices. For more than two decades, she has managed an array of matters, including construction litigation, complex commercial litigation, professional liability cases, product liability issues, premises liability cases, and real estate litigation. Earlier this year, she was appointed vice-chair of the State Bar of Arizona’s inaugural Board of Legal Specialization Construction Defect Law Advisory Commission. Read the court decision
Read the full story...
Reprinted courtesy of Angela L. Cooner, Lewis Brisbois
Ms. Cooner may be contacted at Angela.Cooner@lewisbrisbois.com

U.S. Codes for Deck Attachment

July 16, 2014 — Beverley BevenFlorez-CDJ STAFF
Ted Cushman in Big Builder explained how “decks often collapse when the ledger attachment to the main house fails.” Now, codes require “positive attachment…a solid connection with closely spaced lag screws (or better yet, bolts)." Cushman demonstrated this pictorially in a detail. He also stated to make sure to fasten securely, remove siding, and install flashing. Read the court decision
Read the full story...
Reprinted courtesy of

3D Printing Innovations Enhance Building Safety

October 07, 2019 — Mahmut Ekenel & Melissa Sanchez - Construction Executive
The mention of 3D printing alone is enough to get people excited, often conjuring images of a desktop console that can download and create three dimensional objects such as prototypes, or mechanical parts. And yet, in recent years the technology has given way to a slight impatience, as people begin to wonder how and when it will have a direct impact on both their lifestyles and their businesses. The construction industry has been quick to take advantage of these innovations, and the effects are tangible, especially regarding building safety. The 3D construction technology allows for several key advantages in terms of faster construction times, uncompromised quality of construction and lower costs—allowing for affordable dwellings to be quickly built for people in need. These advantages also lead to safety improvements during the building process. The ability to accelerate construction time without requiring an increase in labor results in a fewer construction-related workplace injuries and a reduction in material waste, making it an environmentally friendly construction method as well. ICC-Evaluation Service (ICC-ES), a subsidiary of the International Code Council (ICC) which develops model codes and standards (i.e. International Building Code, International Residential Code) and delivers a wide array of building safety services, has taken the lead on developing acceptance criteria to address building code compliance of 3D printed construction. Currently, 3D construction technology is not within the provisions of the International Building Code (IBC) or International Residential Code (IRC). The acceptance criteria introduces new compliance measures for interior and exterior 3D printed concrete walls (with and without structural steel reinforcement), load-bearing and non-load-bearing walls, and shear walls in one-story, single-unit, residential dwellings. The 3D walls are constructed by printing two outer layers of 3D concrete and then filling the core with 3D concrete to form a solid wall. Reprinted courtesy of Mahmut Ekenel & Melissa Sanchez, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Mr. Ekenel may be contacted at mekenel@icc-es.org Ms. Sanchez may be contacted at msanchez@icc-es.org Read the court decision
Read the full story...
Reprinted courtesy of

Damages to Property That is Not the Insured's Work Product Are Covered

October 27, 2016 — Tred R. Eyerly – Insurance Law Hawaii
Reversing the district court, the Eighth Circuit predicted that under Iowa law, damage to property other than the insured's work product was covered. Decker Plastics Inc. v. West Bend Mut. Ins. Co., 2016 U.S. App. LEXIS 15235 (8th Cir. Aug. 19, 2016). A 1's, Inc. packaged and sold landscaping materials. Decker Plastics Corporation sold plastic bags to A 1's. The plastic bags were filled with sand and rock, and stored outdoors for sale to customers. Because Decker failed to manufacture the bags with an ultraviolet inhibitor, the bags deteriorated in the sunlight. This caused small shreds of plastic to commingle with A 1's landscaping materials. The plastic was a contaminant that could not be inexpensively separated form A 1's products. A 1's had to clean spilled materials from customer sites, purchase replacement bags from another supplier, and pay to clean up its own property. Read the court decision
Read the full story...
Reprinted courtesy of Tred R. Eyerly, Insurance Law Hawaii
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Superintendent’s On-Site Supervision Compensable as Labor Under Miller Act

March 13, 2023 — David Adelstein - Florida Construction Legal Updates
A recent Miller Act payment bond decision out of the District of Columbia Circuit Court of Appeals, U.S. f/u/b/o Civil Construction, LLC v. Hirani Engineering & Land Surveying, PC, 58 F.4th 1250 (D.C. Circ. 2023), dealt with the issue of whether a subcontractor’s superintendent constitutes recoverable “labor” within the meaning of the Miller Act and compensable as a cost under the Miller Act that typically views labor as on-site physical labor. The issue is that the Miller Act covers “[e]very person that has furnished labor or material in carrying out work provided for in a contract.” Civil Construction, supra, at 1253 quoting 40 U.S.C. s. 3133(b)(1). The Miller Act does not define labor. The subcontractor claimed labor includes actual superintending at the job site. The surety disagreed that a superintendent’s presence on a job site constitutes labor as the superintendent has to actually perform physical labor on the job site to constitute compensable labor under the Miller Act. The subcontractor argued its subcontract and the government’s quality control standards required detailed daily reports that verified manpower, equipment, and work performed at the job site. It further claimed its superintendent had to continuously supervise and inspect construction activities on-site: “[the] superintendent had to be on-site to account for, among other things, hours worked by crew members, usage and standby hours for each piece of equipment, materials delivered, weather throughout the day, and all work performed. These on-site responsibilities reflected the government’s quality control standards, under which the superintendent as ‘the most senior site manager at the project, is responsible for the overall construction activities at the site…includ[ing] all quality, workmanship, and production of crews and equipment.” Civil Construction, supra, at 1253-54. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris, P.A.
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Drywall Originator Hopes to Sell in Asia

October 22, 2013 — CDJ STAFF
With all the talk of problems with drywall coming from China, one company wants to send drywall in the other direction. USG introduced its “Adamant Panel Board” (later Sheetrock) in 1917. But while USG has been a leader in the drywall market in North America, only about 20% of its sales are outside North America. USG is partnering with Boral Ltd., an Australian building materials manufacturer. Earlier this year, USG sold manufacturing and distribution of certain products to the German company Knauf Verwaltungsgesellschaft. Knauf has sold drywall in the United States that was manufactured in China and found to exit corrosive fumes. Read the court decision
Read the full story...
Reprinted courtesy of

FAIRFIELD CONNECTICUT BUILDING EXPERT DIRECTORY AND CAPABILITIES