CAMBRIDGE MASSACHUSETTS BUILDING EXPERT
DIRECTORY AND CAPABILITIES

Revised Cause Identified for London's Wobbling Millennium Bridge After Two Decades

December 20, 2021 — Peter Reina - Engineering News-Record
U.S. and British researchers claim to have found a better explanation for the wobble of London's River Thames Millennium pedestrian suspension bridge than the one prevailing for over 20 years. Alarming swaying of the bridge was caused not by synchronization of walkers' footsteps, as previously believed, but the negative damping effect of their efforts not to fall over. Reprinted courtesy of Peter Reina, Engineering News-Record Mr. Reina may be contacted at reina@btinternet.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

---

West Coast Casualty’s Quarter Century of Service

May 03, 2018 — Beverley BevenFlorez-CDJ STAFF
West Coast Casualty's Construction Defect Seminar has been promoting charitable work for the past twenty-five years. Each year, they promote different charities, and provide multiple ways for individuals and companies to contribute. Whether it’s Buy a Banner, Tennis Shoe Thursday, or Flip Flop Friday, industry members are given opportunities to support worthwhile causes. This year, West Coast Casualty is supporting Hawaii’s Children’s Cancer Foundation , St. Jude Children’s Research Hospital, and Shriners Hospital for Children. WCC also supports charitable organizations through every award that they present each year. Donations are made in the winner’s name: For Jerrold S. Oliver Award of Excellence awardees, Habitat for Humanity as well as a local California and Nevada charity; For Legend of an Era Award, the designated charity of West Coast Casualty’s Construction Defect Seminar; and for The Larry Syhre Commitment to Service Award, a donation to The Larry Syhre Foundation. Read the court decision
Read the full story...
Reprinted courtesy of

---

What to Expect From the New Self-Retracting Devices Standard

November 29, 2021 — Andre Pelland - Construction Executive
One of the latest and most anticipated changes to occur this year relevant to fall protection is the publishing of the ANSI/ASSP Z359.14 2021 revision. Although the effective date isn’t until August 2022, this change is prompting the need for end user to prepare for using and understanding the new terminology performance requirements that will ultimately alter equipment selection criteria. The reason for its relevance is mostly due to its industry dependence and the increasing popularity of these types of devices. This voluntary consensus standard accounts for a vast portion of the fall protection market equipment and has been adopted as the industry standard, even though it is not the legal requirement. To assure a smooth transition, the immediate priority should be to understand the changes and what it means from a usability standpoint. A clear understanding of what changes devices need to comply will allow users to proceed with a comprehensive transition plan. What Are the Most Relevant Changes for the User? Classes The most significant changes are for Class A and B devices used to designate arrest distances and forces and the introduction of the Class 1 and 2 devices. These classes were known as designators for arresting falls at 24 inches and under with higher forces (Class A), and 54 inches and under with lower forces (Class B). Class 1 devices allow anchoring on overhead anchorages only and limitg freefall to no more than two feet. Reprinted courtesy of Andre Pelland, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of
Mr. Pelland may be contacted at andre.pelland@puresafetygroup.com

---

NYC’s Developers Plow Ahead With Ambitious Plans to Reshape City

May 03, 2021 — Patrick Clark & Natalie Wong - Bloomberg
New York City’s builders have had a curious reaction to a pandemic that emptied Manhattan’s office towers, shuttered restaurants and kept tourists home. Over the past year, as scores of businesses closed and many residents beat it out of town, developers doubled-down on visions of steel-and-glass grandeur, hatching plans that could transform the city. Vornado Realty Trust recently said it will demolish the Hotel Pennsylvania and add an office tower taller than 1,200 feet (366 meters) at the site by Madison Square Garden. Near Grand Central Terminal, giant towers are sprouting, including a project to redevelop the Grand Hyatt next to the transit hub. The developers are proposing a 1,600-foot skyscraper that would be among the tallest in the Western Hemisphere. Read the court decision
Read the full story...
Reprinted courtesy of Patrick Clark & Natalie Wong, Bloomberg

---

The Future for Tall Buildings Could Be Greener

October 01, 2013 — CDJ STAFF
Skidmore, Owens and Merrill made its reputation by creating iconic structures of steel, concrete, and glass, but in a new report, the firm puts forth ways in which the first item would be wood. Building codes in many cities stipulate that buildings taller than four stories be built of steel and concrete, but the firm says that it has come up with a way of building structures of 30 stories or more using wood. The tallest wood-framed building currently is only ten stories tall. In order to calculate a comparison, Skidmore, Owens and Merrill designed a forty-two story building based on the design of an existing apartment building. Actually building it would require almost 4 million board-feet of wood. Unlike a typical single-family home (and its 20,000 board-feet of wood), these building would use glue-laminated timber and slabs. The study found that the building would weigh less than half as much, allowing a less massive foundation. If the wood came from sustainable sources, its environmental impact would be drastically reduced. They calculated that instead of 9,500 tons of CO2 emissions for the conventional tower, the wood structure would be responsible for only 2,100 tons of emissions. Skyscrapers will continue to be a feature of large cities. But instead of urban canyons of steel and concrete, in the future those towering buildings might be made of wood. Read the court decision
Read the full story...
Reprinted courtesy of

---

New York Considers Amendments to Construction Industry Wage Laws that Would Impose Significant Burden Upon Contractors

August 04, 2021 — Richard W. Brown & Michael D. Angotti - Saxe Doernberger & Vita, P.C.
A bill that would amend the the wage and hour requirements of the New York Labor Law was recently passed by the New York State Legislature and is expected to be signed by Governor Cuomo. Bill Number S2766C (the “Bill”) is intended to protect construction workers against wage theft. However, it places a heavy burden on contractors to police the payroll practices of its downstream subcontractors and exposes them to potentially significant liability for the wage and hour violations of their subcontractors. The proposed Bill would make a contractor or upstream subcontractor jointly and severally liable for any wages owed to employees of their subcontractors. The Bill allows for a private right of action for such subcontractor’s employee (or such employee’s representative) to bring a civil or administrative action seeking payment of unpaid wages owed pursuant to Section 198 of the New York Labor Law. In such an action against a subcontractor for unpaid wages, the contractor or upstream subcontractor is not only jointly and severally liable for any unpaid wages, but also for the prevailing claimant’s reasonable attorney fees, prejudgment interest, and, absent a good faith defense, liquidated damages equal to the amount of the wages owed. Reprinted courtesy of Richard W. Brown, Saxe Doernberger & Vita, P.C. and Michael D. Angotti, Saxe Doernberger & Vita, P.C. Mr. Brown may be contacted at RBrown@sdvlaw.com Mr. Angotti may be contacted at MAngotti@sdvlaw.com Read the court decision
Read the full story...
Reprinted courtesy of

---

The Construction Lawyer as Problem Solver

October 21, 2015 — Christopher G. Hill – Construction Law Musings
As a construction attorney here in Virginia I “wear many hats.” Counselor, mediator, adviser, risk manager, litigator, and others depending upon the situation. I take each and every one of these roles seriously and at times take on more than one depending on a client’s situation. One “role” that I try to keep in mind every day when I come to work is that of problem solver. In response to the various attacks on an attorney’s role in the construction world, I have written that your friendly neighborhood construction lawyer can and should be part of the solution, and not part of the problem. A big part of this in my mind is the need to focus on the fact that any construction dispute is a problem to be solved, preferably earlier rather than later. By the time that a construction matter reaches my desk, the parties to that dispute have likely reached some sort of impasse in need of an efficient solution. Read the court decision
Read the full story...
Reprinted courtesy of Christopher G. Hill, Law Office of Christopher G. Hill, PC
Mr. Hill may be contacted at chrisghill@constructionlawva.com

---

Texas Construction Firm Officials Sentenced in Contract-Fraud Case

August 07, 2018 — Tom Ichniowski – Engineering News-Record
Two top officials of a Texas construction company—Honest, Experienced, Reliable Contracting Solutions LLC—have been sentenced to federal prison terms for defrauding the State Dept. through a plan to steer more than $1 million in contracts to the company, the Dept. of Justice says. Read the court decision
Read the full story...
Reprinted courtesy of Tom Ichniowski, ENR
Mr. Ichniowski may be contacted at ichniowskit@enr.com

---