Common Law Indemnification - A Primer
April 12, 2021 —
Brian F. Mark - Hurwitz & Fine, P.C.“Common law indemnification is generally available ‘in favor of one who is held responsible solely by operation of law because of his relationship to the wrongdoer.’” McCarthy v. Turner Constr., Inc., 17 N.Y.3d 369, 375 (2011), quoting Mas v. Two Bridges Assocs., 75 N.Y.2d 680, 690 (1990).
What is Common Law Indemnification and Who Can Assert it?
Indemnification, in general terms, is the right of one party to shift a loss to another and may be based upon an express contract or an implied obligation. Bellevue S. Assoc. v. HRH Constr. Corp., 78 N.Y.2d 282 (1991). Based on a separate duty owed the indemnitee by the indemnitor, common law indemnification, or implied indemnification, permits one who was compelled to pay for the wrong of another to recover from the wrongdoer the damages paid to the injured party. D’Ambrosio v. City of New York, 55 N.Y.2d 454, 460 (1982); Curreri v. Heritage Prop. Inv. Trust, Inc., 48 A.D.3d 505, 507 (2d Dept. 2008).
The premise of common law indemnification is vicarious liability, defined as “liability that a supervisory party (such as an employer) bears for the actionable conduct of a subordinate or associate (such as an employee) based on the relationship between the two parties” Black’s Law Dictionary (11th ed. 2019). Common law indemnification “reflects an inherent fairness as to which party should be held liable for indemnity.” McCarthy, 17 N.Y.3d at 375. It is a restitution concept which permits shifting the loss because, to fail to do so, would result in the unjust enrichment of one party at the expense of the other. Mas, 75 N.Y.2d at 680, 690; Kingsbrook Jewish Medical Center v. Islam, 172 A.D.3d 1342, 1343 (2d Dept. 2019).
Read the court decisionRead the full story...Reprinted courtesy of
Brian F. Mark, Hurwitz & Fine, P.C.Mr. Mark may be contacted at
bfm@hurwitzfine.com
Mitigating Mold Exposure in Manufacturing and Multifamily Buildings
July 31, 2024 —
Laura Champagne - Construction ExecutiveAs hurricanes season and summer storms approach, more apartment complexes, commercial and industrial properties, and public buildings are at risk of leaking and flooding. Water-saturated structures are prime breeding grounds for mold, but there are ways to prevent, detect and remove it before it becomes a serious and costly issue—for buildings and building residents alike. Being proactive limits an owner’s exposure to the liability of debilitating health effects and structural safety concerns.
Mold requires three things to grow: water, food and humidity. Water will stealthily penetrate small porous surfaces of any building material, such as drywall, plaster, wood, concrete or even fabrics. These materials serve as a food source to quickly produce more fungus. Common sources of undetected water flow include foundation problems, poorly installed windows, roof malfunctions, gutter clogs, storm damage, leaky pipes, improper drainage, HVAC issues, faulty appliances, bathroom vent issues and wet building materials. Mold loves humidity and thrives in dark, warm environments, such as attics, basements, lofts, building corners and bathrooms.
Reprinted courtesy of
Laura Champagne, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
AB5 Construction Exemption – A Checklist to Avoid Application of AB5’s Three-Part Test
February 18, 2020 —
Blake Dillion - Payne & Fears LLPConstruction companies have a unique opportunity to avoid the application of the restrictive new independent contractors law that took effect this year. This article provides a checklist that will help construction companies determine whether their relationships with subcontractors qualify for this exemption.
California’s Assembly Bill 5 (“AB5”), which went into effect Jan. 1, 2020, enacts into a statute last year’s California Supreme Court decision in
Dynamex Operations West, Inc. v. Superior Court, 4 Cal. 5th 903 (2018), and the Court’s three-part standard (the “ABC test”) for determining whether a worker may be classified as an employee or an independent contractor.
Certain professions and industries are potentially exempt from this standard, including the construction industry. The ABC test does not apply to the relationship between a contractor and an individual performing work pursuant to a subcontractor in the construction industry, if certain criteria are met. In order for the “construction exemption” to apply, the contractor must demonstrate that all of the following criteria are satisfied.
- The subcontract is in writing;
- The subcontractor is licensed by the Contractors State License Board and the work is within the scope of that license;
- If the subcontractor is domiciled in a jurisdiction that requires the subcontractor to have a business license or business tax registration, the subcontractor has the required business license or business tax registration;
- The subcontractor maintains a business location that is separate from the business or work location of the contractor;
- The subcontractor has the authority to hire and to fire other persons to provide or assist in providing the services;
- The subcontractor assumes financial responsibility for errors or omissions in labor or services as evidenced by insurance, legally authorized indemnity obligations, performance bonds, or warranties relating to the labor or services being provided; and
- The subcontractor is customarily engaged in an independently established business of the same nature as that involved in the work performed.
The contractor must be able to establish each of the above criteria for the construction exemption to apply. If the contractor is successful, the long standing multi-factor test for determining independent contractor vs. employee status as described in
S.G. Borello & Sons, Inc. v. Dep’t of Industrial Relations, 48 Cal. 3d 341 (1989) will apply.
You should review your processes and procedures for engaging subcontractors to ensure that you can satisfy the above criteria. If you have questions about the application of AB5, the construction exemption, or the
Borello factors, you should speak with an attorney.
Read the court decisionRead the full story...Reprinted courtesy of
Blake A. Dillion, Payne & FearsMr. Dillion may be contacted at
bad@paynefears.com
How Small Mistakes Can Have Serious Consequences Under California's Contractor Licensing Laws.
February 15, 2018 —
Eric Reed - Myers, Widders, Gibson, Jones & Feingold, LLPIn construction, some risks have nothing to do with how well a contractor executes a project. Licensing problems is one of these risks. Even a brief lapse caused by an unintentional administrative error can give the CSLB grounds to discipline a contractor, or enable a customer to seek disgorgement and other remedies provided by Business and Professions Code section 7031. This article discusses five tips for mitigating the liabilities associated with licensing problems.
Tip 1: Take workers' compensation insurance very seriously. Workers’ compensation insurance problems can trigger license suspension in California. Business and Professions Code section 7125.4 calls for automatic suspension if a contractor cannot provide proof of workers’ compensation insurance for any period of time. This is particularly serious for residential remodelers who claim exemption for workers’ compensation but are later discovered – usually during litigation with a homeowner – to have “off the books” workers helping them. Courts can declare the contractor retroactively unlicensed under these circumstances and order it to disgorge,
i.e., to pay back, every penny paid by the customer for the entire project (even for materials). (Bus. & Prof. Code, § 7031, subd. (b);
Wright v. Issak (2007) 149 Cal.App.4th 1116.) The contractor will also find itself unable to collect any amounts owed to it by the customer. (Bus. & Prof. Code, § 7031, subd. (a).)
Tip 2: Watch out for licensing confusion after a merger or acquisition. The economic downturn of 2008 and 2009 resulted in consolidation throughout the building industry. The newly merged or acquired entities often allowed redundant licenses to expire, assuming they could complete all pending projects under the umbrella of the acquiring company's license. Many learned this was a mistake the hard way. Armed with the California Supreme Court's opinion in
MW Erectors, Inc. v. Niederhauser Ornamental & Metal Works Co., Inc. (2005) 36 Cal.4th 412, customers began refusing to pay invoices and demanding disgorgement under Business and Professions Code section 7031 because the original contractor did not maintain licensure “at all times.” Many of these customers succeeded.
Tip 3: If a license suspension has occurred or is imminent, prepare to prove substantial compliance. Section 7031(a) and (b) give a disgruntled or indebted customer every incentive to capitalize on a contractor's licensing problems. Subdivision (e) is where a contractor must turn to protect its interests if this happens. It allows the contractor to prove “substantial compliance” with licensing requirements and avoid (a)’s and (b)’s sharp edges if it can show the following:
(1) The contractor “had been duly licensed as a contractor in this state prior to the performance of the act or contract”;
(2) It “acted reasonably and in good faith to maintain proper licensure”; and
(3) It “acted promptly and in good faith to remedy the failure to comply with the licensure requirements upon learning of the failure.”
The Court of Appeal confirmed in
Judicial Council of California v. Jacobs Facilities, Inc. (2015) 239 Cal.App.4th 882 that a contractor, upon request, is entitled to a hearing on these three factors before it is subjected to disgorgement under Section 7031(b). The legislature amended Section 7031 shortly after the Court of Appeal published this case. The Assembly’s floor analysis went so far as to directly quote the opinion’s observation that penalizing a construction firm for “technical transgressions only indirectly serves the Contractors Law’s larger purpose of preventing the delivery of services by unqualified contractors.” (Assem. Com. on Bus. and Prof., Off. of Assem. Floor Analyses, analysis of Sen. Holden's No. 1793 (2015-2016 Reg. Sess.) as amended August 2, 2016, p. 2.) This echoed an industry consensus that clarifying the law was needed to ensure that properly licensed and law-abiding construction firms were not “placed at fatal monetary risk by malicious lawsuits motivated by personal gain rather than consumer protection.” (Assem. Com. on Judiciary, com. on Assem. Bill No. 1793 (2015-2016 Reg. Sess.), pp. 6-7.)
Unfortunately, existing law does not give many examples of what it means to act “reasonably and in good faith to maintain proper licensure” or to act “promptly and in good faith” to fix license problems. A practical approach is for a contractor to work backwards by assuming it will need to prove substantial compliance at some point in the future. Designated individuals within the organization should have clear responsibility over obtaining and renewing the proper licenses and should keep good records. If necessary, these designees can testify about the contractor's internal policies and their efforts to fix licensing problems when they arose. For example, if the suspension resulted from not providing the CSLB proof of workers’ compensation insurance, the designee can testify about the cause (a broker miscommunication, transmission error,
etc.) and produce documents showing how he or she worked promptly to procure a certificate of insurance to send CSLB. Saved letters, emails, and notes from telephone calls will provide designees and their successors with an important resource months or years down the line if a dispute arises and the contractor is required to reconstruct the chronology of a licensing glitch and prove its due diligence.
Tip 4: Don't sign new contracts unless all necessary licenses are active and any problems are resolved. A recently-formed contractor should not begin soliciting and signing contracts until all required licenses are confirmed as “active.” The first requirement of substantial compliance – being “duly licensed as a contractor in this state prior to the performance of the act or contract” – cannot be met by a contractor that first obtains its license mid-project. (Bus. & Prof. Code, § 7031, subd. (e)(1);
Alatriste v. Cesar’s Exterior Designs (2010) 183 Cal.App.4th 656.) A licensed contractor should also consider refraining from signing new contracts if there is any reason to believe its license might be suspended in the near future – especially if the suspension will be retroactive. Having a suspension on record at the time of contracting may complicate the question of whether the contractor was “duly licensed . . . prior to performance” for the purposes of substantial compliance.
Tip 5: Any judgment against a contractor can cause license suspension if not handled promptly and correctly. The Business and Professions Code authorizes the CSLB to suspend the license of a contractor that does not pay a construction related court judgment within 90 days. The term “construction related” is interpreted to include nearly all types of disputes involving a contractor. (16 Cal. Code Reg. 868;
Pacific Caisson & Shoring, Inc. v. Bernards Bros. Inc. (2015) 236 Cal.App.4th 1246, 1254-1255.) This means a contractor should treat a judgment against it for unpaid office rent, for example, as one carrying the same consequences as one arising from a construction defect or subcontractor claim. The contractor should also not assume that filing an appeal, or agreeing with the other side to stay enforcement, automatically excuses the 90-day deadline in the eyes of the CSLB. It does not. A contractor must notify the CSLB in writing before this period expires, then post bond for the amount of judgment, if it wishes to delay payment for any reason. (Bus. & Prof. Code, § 7071.17, subd. (d).) A suspension may result if it does not. This applies even to small claims judgments.
Recent case law and the 2016 amendments to Business and Professions Code section 7031 provide some solace to those caught in the dragnet of California's licensing laws. But avoiding these problems altogether is preferable. Consider licensing the foundation of a successful business and deserving of the same attention as the structures a contractor builds.
Eric R. Reed is a business and insurance litigator in the Ventura office of Myers, Widders, Gibson, Jones & Feingold, LLP.
Read the court decisionRead the full story...Reprinted courtesy of
Eric Reed, Myers, Widders, Gibson, Jones & Feingold, LLPMr. Reed may be contacted at
ereed@mwgjlaw.com
Pennsylvania Federal Court Confirms: Construction Defect Claims Not Covered by CGL Policies
March 06, 2022 —
Nathan A. Cazier & Scott S. Thomas - Payne & FearsThe construction industry operates under the constant spectre of claims seeking damages for defective or faulty workmanship. Fortunately, the law in most states treats these claims as covered under commercial general liability (“CGL”) policies. A small minority of states take a much stingier view. In a newly decided case, a Pennsylvania federal court confirmed that Pennsylvania belongs to this small group of states that regard construction claims as not worthy of liability insurance coverage. Main St. Am. Assurance Co. v. Howard Lynch Plastering, Inc., No. CV 21-3977, 2022 WL 445768, (E.D. Pa. Feb. 14, 2022).
Main St. involves a typical construction defect case: W.B. Homes (“W.B.”) developed a residential community, contracting with various trades to build the homes. W.B. required these subcontractors to obtain liability insurance covering their work and, when homeowners sued W.B. for damages due to allegedly faulty work, W.B. tendered the claim to these insurers. One of them, Main Street Assurance Co. (“Main Street”) then sued W.B. for declaratory relief, arguing that under Pennsylvania law, it had no duty to defend W.B.
Reprinted courtesy of
Nathan A. Cazier, Payne & Fears and
Scott S. Thomas, Payne & Fears
Mr. Cazier may be contacted at nac@paynefears.com
Mr. Thomas may be contacted at sst@paynefears.com
Read the court decisionRead the full story...Reprinted courtesy of
Drones Used Despite Uncertain Legal Consequences
March 12, 2015 —
Beverley BevenFlorez-CDJ STAFFFrancis Manchisi of Wilson Elser discussed how several industries—including construction—are using unmanned aircraft systems or unmanned aerial vehicles, commonly referred to as drones, and are either exploiting legal loopholes or ignoring laws altogether.
The Federal Aviation Administration (FAA) has recently released a Notice of Proposed Rulemaking, which is now in a 60-day “notice and comment” period that is open to the public. Once that period ends, the FAA will consider the comments before putting the rules into law.
According to Manchisi, the proposed rules include:
- Unmanned aircraft must weigh less than 55 lbs. (25 kg).
- Unmanned aircraft must remain within visual line of sight (VLOS) of the operator or visual observer.
- Maximum altitude is 500 feet above ground level.
- Preflight inspection by the operator is required.
- Operators are required to obtain an unmanned aircraft operator certificate with a sUAS rating from the FAA.
Read the court decisionRead the full story...Reprinted courtesy of
Toward Increased Citizen Engagement in Urban Planning
November 14, 2018 —
Aarni Heiskanen - AEC BusinessDigitalization creates new opportunities for citizen engagement in urban planning. I gave a short presentation on the topic at the Digitalization in Urban Planning event in Helsinki.
The event was organized by CHAOS Architects, a tech company. Its AI cloud platform allows citizens to share ideas about their city and co-create it with their community. The platform contains engagement-driven applications and third-party APIs that process business intelligence for better interaction and decision-making.
Read the court decisionRead the full story...Reprinted courtesy of
Aarni Heiskanen, AEC BusinessMr. Heiskanen may be contacted at
aec-business@aepartners.fi
The Multigenerational Housing Trend
May 02, 2014 —
Beverley BevenFlorez-CDJ STAFFReuters reported that “[m]ore than 50 million Americans already live in multigenerational situations, according to Pew Research, and the number is expected to grow as baby boomers age.” Lennar Corp has “Next Gen” home models, which provides multigenerational housing for prices similar to traditional homes. For instance, according to Reuters, one of the Next Gen models contains “an 800-square-foot house-within-a-house” with “a separate entrance and its own patio, plus a bedroom, sitting area, and bathroom.”
Other home builders are also providing multigenerational housing: “Gertz Fine Homes, which builds between 12-30 houses a year near Portland, Oregon, says about 30 percent of sales are now multigenerational models, which can cost around $600,000.”
Read the court decisionRead the full story...Reprinted courtesy of