Seattle Washington Building Expert Directory

Testing Your Nail Knowledge

September 03, 2014 — Beverley BevenFlorez-CDJ STAFF
Tools of the Trade provided “ten things you probably don’t know about nails.” For instance, “[I]n 2013 the U.S consumed 629,716 tons of steel nails.” Frane, the author of the article, said that if that “many nails were melted down and cast into a block of solid steel, the block would cover the area of a football field to a depth of 45’.” Another fact is that only 21% of nails used in the U.S. were made in the U.S. Furthermore, the leading U.S. supplier of nails is Mid Continent Nail Corporation, and they are located in Poplar, Missouri. Read the court decision
Read the full story...
Reprinted courtesy of

Constructive Change Directives / Directed Changes

June 06, 2018 — David Adelstein - Florida Construction Legal Updates
rime contracts typically contain a constructive change directive clause. A constructive change directive also goes by the acronym CCD (and for purposes of this article, such changes will be referred to as a CCD), however it can also be known as a Work Change Directive, Interim Directed Change, or Directed Change, depending on the type of contract beign utilized. An owner can order a CCD, versus issuing the contractor a formalized change order, as a mechanism to direct the prime contractor to perform work if there is a dispute as to contract amount, time, or scope. Just because an owner issues a CCD does not mean the owner is conceding that it owes the contractor a change order. Rather, the owner is ordering the CCD as a mechanism to keep the project moving forward notwithstanding a disagreement with the contractor as to the price or time impact. Standard form construction agreements such as the AIA, EJCDC, or ConsensusDocs, will have a standard provision dealing with change directives where the owner can order the contractor to proceed with work in the absence of a change order. In the federal government context, most construction contracts will contain a changes clause that authorizes the government to formally direct changes; and, there is authority for contractors to equitably pursue a constructive change based on certain directives or instructions issued by the government. Naturally, from the contractor’s perspective, this CCD provision is an important consideration as it could likely require the contractor to finance a change to the owner’s project, particularly if there is a scope dispute where the owner does not believe the contractor is entitled to any change order. Read the court decision
Read the full story...
Reprinted courtesy of David Adelstein, Florida Construction Legal Updates
Mr. Adelstein may be contacted at dadelstein@gmail.com

Haight Expands California Reach – Opens Office in Sacramento

October 21, 2015 — Haight Brown & Bonesteel, LLP
Haight Brown & Bonesteel LLP is excited to announce that the firm has opened an office in Sacramento with the addition of two new attorneys – Elizabeth W. Lawley has joined as Managing Partner for the Sacramento office and Gino Cano as Senior Counsel. Lawley and Cano bring their thriving practices to Haight with expertise in construction law and general liability matters. With the addition of Sacramento, Haight now has six offices throughout the State of California. Our footprint and ability to provide exceptional service is greatly expanded. Haight Brown & Bonesteel LLP 2485 Natomas Park Drive Suite 450 Sacramento, CA 95833 www.hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Ninth Circuit: Speculative Injuries Do Not Confer Article III Standing

February 28, 2018 — Omar Parra and Lawrence S. Zucker II – Publications & Insights
As Dwight Schrute of hit NBC show “The Office” said, “identity theft is not a joke, Jim! Millions of families suffer every year!” In response, Congress has passed a variety of legislation over the years aimed at curbing identity theft. One such piece of legislation, the Fair Credit Reporting Act (“FCRA”), as amended by corollary acts, prohibits the printing of more than the last 5 digits of the credit card number or the credit card number’s expiration date on any sales receipt. Anyone who “willfully fails to comply with [the requirements] is liable to that consumer” for statutory or actual damages, attorney’s fees and costs, and potential punitive damages. But is a statutory violation of the FCRA alone a sufficient injury to confer Article III standing? No, says the Ninth Circuit. Reprinted courtesy of Omar Parra, Haight, Brown & Bonesteel LLP and Lawrence S. Zucker II , Haight, Brown & Bonesteel LLP Mr. Parra may be contacted at oparra@hbblaw.com Mr. Zucker may be contacted at lzucker@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

New Index Tracking Mortgages for New Homes

June 18, 2014 — Beverley BevenFlorez-CDJ STAFF
The National Association of Home Builders’ Eye on Housing reported that the Mortage Bankers Association (MBA) completed their Builder Application Survey (BAS), which demonstrated that “mortgage applications for new home purchases decreased by a not seasonally adjusted monthly rate of 8.4% in May 2014. However, on a 12-month basis, mortgage applications for new home purchases in May 2014 were 4.9% higher than their level in May 2013.” According to Eye on Housing, “This is the fifth consecutive month of year-over-year increases in mortgage applications for new home purchases.” Read the court decision
Read the full story...
Reprinted courtesy of

Jobsite Safety, Workforce Shortage Drive Innovation in Machine Automation

August 07, 2018 — Scott Crozier - Construction Executive
From driverless cars and drones, to robots working in operating rooms, manufacturing plants and fast food restaurants, machine automation is making headlines – and will continue to do so for the foreseeable future. And when it comes to machine automation, the construction industry is poised to be a hotbed of innovation. Equipment manufacturers and technology providers in the construction industry have the benefit of using the lessons learned from the manufacturing and automotive industries to meet the needs of contractors, project owners and machine operators through more efficient, highly automated equipment. According to the Society of Automotive Engineers (SAE), there are six stages of automation, ranging from zero autonomy to full automation, where a vehicle is capable of performing all driving functions under all conditions. The construction industry is somewhere in the middle of these six stages, with some automation functionality available on some equipment today, but still requiring an operator to remain engaged with the driving task and the environment. Reprinted courtesy of Scott Crozier, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

Loaded Boom of Burning Tower Crane Collapses in Manhattan, Injuring Six

August 07, 2023 — James Leggate - Engineering News-Record
The boom of a tower crane, with its engine on fire, collapsed July 26 at a high-rise construction site in midtown Manhattan—hitting the face of the building across the street as it dropped its 16-ton load. City officials said they would investigate the mishap, which caused minor injuries to two firefighters and four others. Reprinted courtesy of James Leggate, Engineering News-Record Mr. Leggate may be contacted at leggatej@enr.com Read the full story... Read the court decision
Read the full story...
Reprinted courtesy of

Executive Insights 2024: Leaders in Construction Law

August 05, 2024 — Construction Executive
The key risks that should always be taken into account when a contract is signed are risks associated with uncompensated delays and cost increases. Provisions relating to the scope of work deserve significant attention to help minimize these risks. Defining the scope of work is often put on the backburner while parties focus on negotiating the rest of the terms and conditions of the contract. And when these scopes are inserted, they are often not closely reviewed by attorneys who tend to defer to project personnel on scope. These situations can lead to costly disputes. Instead, make sure: (1) the correct plans and specifications have been referenced in the contract; (2) an attorney or his/her business counterpart is familiar with relevant specifications; (3) the exhibit containing the assumptions and clarifications is clearly written, has been coordinated with language in the body of the contract and can be clearly understood by attorneys and business people beyond the preconstruction personnel who drafted them; and (4) the contract addresses the order of precedence in the event of a conflict between or among contract provisions (including exhibits). With regard to specifications referenced above, an attorney review is advised because many specification sections, including submittal sections, change order sections, payment provisions and construction progress documentation sections, regularly vary from the negotiated sections of the actual contract. Contractors also unwittingly accept design risk through performance specifications, and the accompanying obligations and risks are underestimated by those tasked with the initial review of those documents. In sum, a clear scope is as important as clear terms and conditions. Reprinted courtesy of Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the court decision
Read the full story...
Reprinted courtesy of

SEATTLE WASHINGTON BUILDING EXPERT DIRECTORY AND CAPABILITIES