Homebuyers Get Break as Loan Rates Defy Fed Tapering: Mortgages
February 14, 2014 —
Kathleen M. Howley – BloombergAshley Underwood is taking advantage of the unexpected drop in mortgage rates by rushing to buy her first home before they go up again.
“I’m ready to cancel plans at a moment’s notice to go look at a house,” said Underwood, 27, who lives in Indianapolis, Indiana. “I didn’t expect to see rates falling again, and I want to lock in something before I lose out.”
The drop in the last month proved forecasters wrong, said Douglas Duncan, chief economist of Fannie Mae in Washington. After the Federal Reserve announced in December that it would begin tapering purchases of mortgage-backed securities, all the major housing forecasters said rates would jump this quarter. Economists didn’t foresee that investors would react to the Fed’s retreat by moving money from emerging markets into U.S. Treasuries, driving down home-loan rates.
Read the court decisionRead the full story...Reprinted courtesy of
Kathleen M. Howley, BloombergMs. Howley may be contacted at
kmhowley@bloomberg.net
Construction Law Alert: Concrete Supplier Botches Concrete Mix, Gets Thrashed By Court of Appeal for Trying to Blame Third Party
January 21, 2015 —
Steven M. Cvitanovic and Whitney L. Stefko – Haight Brown & Bonesteel LLPOn January 8, 2015, the Second Appellate district affirmed judgment of the lower court in State Ready Mix Inc. v. Moffatt & Nichol, and barred a concrete supplier from blaming a third party consultant for the concrete supplier's failure to deliver concrete that met project specifications.
In 2012, Major Engineering Marine, Inc. was hired by a project manager to construct a harbor pier in the Channel Islands Harbor. Major hired State Ready Mix, Inc. to supply the concrete for the project. State wrote and submitted a concrete mix design and, at the request of Major, civil engineer Moffatt & Nichol reviewed and approved State's mix design at no charge.
Reprinted courtesy of
Steven M. Cvitanovic, Haight Brown & Bonesteel LLP and
Whitney L. Stefko, Haight Brown & Bonesteel LLP
Mr. Cvitanovic may be contacted at scvitanovic@hbblaw.com; Ms. Stefko may be contacted at wstefko@hbblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Why’d You Have To Say That?
October 09, 2023 —
Daniel Lund III - LexologyA surety seeking collateral from indemnitors filed suit in federal court in Louisiana pursuant to a forum selection clause in the indemnity agreement between the parties.
The indemnitors were being called upon to provide collateral as a result of defaults on two Louisiana Department of Transportation projects. Seeking to move the dispute to Louisiana state court from federal court, the indemnitors filed a forum non conveniens motion.
Among the arguments of the indemnitors removing the case out of federal court was the doctrine of “direct-benefits” estoppel – a policy which “‘holds a non-signatory to a clause in a contract if it “knowingly exploits the agreement” containing the clause.’ In re Lloyd's Reg. N. Am., Inc., 780 F.3d 283, 291 (5th Cir. 2015) (quoting Bridas S.A.P.I.C. v. Gov't of Turkmenistan, 345 F.3d 347, 361-62 (5th Cir. 2003)).”
Read the court decisionRead the full story...Reprinted courtesy of
Daniel Lund III, PhelpsMr. Lund may be contacted at
daniel.lund@phelps.com
10 Safety Tips for General Contractors
October 09, 2018 —
Eric Weisbrot – JW Surety BondsThe construction industry continues to grow each year, paving the way for general contractors to make a profitable, sustainable living when the job is done right. However, to do so effectively, safety standards need to be met with consistency and focus on each worksite. General
contractors who are licensed and bonded must take proactive steps to avoid potentially fatal injuries among their subcontractors and employees, even though this may be easier said than done. To create and maintain a safe worksite each and every time, general contractors should consider how to implement the following best practices and safety tips on the job.
1 – Know the Risks
The most crucial step toward maintaining a safe construction site is to first be aware of the risks involved. Each year, thousands of
construction workers experience injuries on the job, and some ultimately lose their life because of safety missteps at work. As a general contractor, it is your responsibility to know that construction risks run rampant given the nature of the work. Being tuned into the potential for falls, slips, and other common safety-related incidents is a necessary part of operating a safe worksite for you and your employees.
2 – Require Protective Gear
An often overlooked safety precaution on construction sites is the use of up-to-date and well-maintained protective gear. For many subcontractors and employees, it is easy to skip this necessary step in safeguarding themselves from potential safety issues. However, general contractors can take steps to make protective gear a requirement on the job. This may include mandating hardhats and steel-toed shoes, gloves, and eyewear when appropriate. All visitors and workers on a construction site should follow protective gear instructions to avoid unnecessary safety risks.
3 – Educate on Ladder Safety
According to the Bureau of Labor Statistics, ladder injuries account for a significant number of construction worker incidents each year, making up more than 200,000 accidents on average. Ladders have continuously ranked high on OSHA’s list of violations at construction sites because the prevalence of injuries is so high. General contractors can help thwart ladder-related injuries among workers by promoting ladder safety training, including reminders about the right ladder to use for each task. Workers should also be well aware of the importance of inspection before use, and they should always follow the three points of contact rule when going up or down a ladder.
4 – Recognize Equipment Pitfalls
Many construction workers experience injuries relating to equipment used on the job. This could be tied to getting on or off equipment, or loading and unloading materials from machinery. In any case, general contractors can encourage simple tactics to improve equipment safety measures. Paying close attention to secure footing while getting on or off a machine, having more than one person assist with loading and unloading, and ensuring everyone feels comfortable asking for help with these tasks reduces safety risks.
5 – Document Potential Hazards
A general contractor’s main responsibility is to manage the construction site efficiently from start to finish. Part of this duty is recognizing the possible issues on a worksite that may lead to accidents or injuries if not addressed at the beginning of a project. It is necessary to take the time to identify safety risks such as unstable working surfaces, dangerous trenches, or weather-related concerns that may impact the safety of subcontractors, suppliers, or other site visitors. Potential hazards should be documented and shared with site workers, and they should be updated as the project progresses.
6 – Maintain Equipment and Tools
Poorly maintained equipment and tools also cause issues on construction sites. The Infrastructure Health and Safety Association suggests that general contractors
remind workers to inspect tools, machines, handheld equipment, and vehicles before each use to ensure they are properly maintained. Additionally, understanding the maintenance standards for certain tools or equipment and following those guidelines is crucial to reducing injury on the job.
7 – Minimize Crowds
Crowded work areas can be a serious safety issue for general contractors, subcontractors, and vendors and suppliers on site. It is common for crowds to gather during the use of heavy equipment or when a significant task is being completed. However, general contractors should discourage crowd-forming for spectating purposes. This can be done by limiting the number of people allowed to be in an area when certain activities are taking place, and enforcing these rules at every possible opportunity.
8 – Hire Licensed Subcontractors
General contractors may have full- or part-time employees as part of their business model, or there may be a heavy presence of subcontractors not directly tied to the main business. In either case, it is essential to have faith in the capabilities of workers, including their willingness and commitment to follow safety standards. General contractors can help ensure each worker is more likely to take safety seriously when they hire licensed contractors who follow through with
licensing requirements as mandated by the state or city.
9 – Focus on Training
Even after vetting subcontractors and employees based on their licensing status, general contractors also need to ensure training and education are a priority. Several online and in-person courses focus on construction safety training which workers should be encouraged to attend. Safety
education programs from OSHA and other reputable sources are crucial to decreasing accidents on the job.
10 – Be Present
Finally, general contractors can only have an impact on the safety of the job site when they are purposefully present. It is common for some GCs to stop by a project when they are needed or to check on progress periodically. However, new safety hazards, lacking worker training, and other risks are not easily fixed when the general contractor is not consistently on site. Reducing the potential for falls, slips, trips, and fatalities on the job requires communication with workers, and that takes place most effectively when general contractors are in person.
Eric Weisbrot is the Chief Marketing Officer of JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Hurricane Warning: Florida and Southeastern US Companies – It is Time to Activate Your Hurricane Preparedness Plan and Review Key Insurance Deadlines
November 01, 2022 —
Andrea DeField, Walter J. Andrews, Michael S. Levine, Lawrence J. Bracken II & Cary D. Steklof - Hunton Insurance Recovery BlogHurricane Ian is rapidly approaching the west coast of Florida and is expected to make landfall as a Category 4 hurricane near the Tampa area within the coming days. While the exact track is still being determined, there is a chance the storm may also impact insureds in Georgia and South Carolina. Now is the time to activate your disaster plan and ensure that you have your relevant insurance policies in your possession and that you review them for critical deadlines.
We put together an
alert here with tips to help you and your business mitigate potential storm loss and maximize coverage.
Reprinted courtesy of
Andrea DeField, Hunton Andrews Kurth,
Walter J. Andrews, Hunton Andrews Kurth,
Michael S. Levine, Hunton Andrews Kurth,
Lawrence J. Bracken II, Hunton Andrews Kurth and
Cary D. Steklof, Hunton Andrews Kurth
Ms. DeField may be contacted at adefield@HuntonAK.com
Mr. Andrews may be contacted at wandrews@HuntonAK.com
Mr. Levine may be contacted at mlevine@HuntonAK.com
Mr. Bracken may be contacted at lbracken@HuntonAK.com
Mr. Steklof may be contacted at csteklof@HuntonAK.com
Read the court decisionRead the full story...Reprinted courtesy of
California Court of Appeal Vacates $30M Non-Economic Damages Award Due to Failure to Properly Apportion Liability and Attorney Misconduct During Closing Argument
February 08, 2021 —
Krsto Mijanovic, Peter A. Dubrawski, Arezoo Jamshidi & Catherine M. Asuncion - Haight Brown & Bonesteel LLPOn January 20, 2021, the California Court of Appeal, Second District, Division Six (Ventura), in Plascencia v. Deese (B299142), vacated a $30 million non-economic damages award in a highway fatality case because: (1) the award did not properly apportion non-economic damages among everyone at fault in violation of Proposition 51; and (2) the amount of the award appeared to have been influenced by plaintiffs’ counsel’s misconduct and prejudicial remarks during closing argument.
In Plascencia, the plaintiffs sued several defendants for the wrongful death of their daughter arising from a highway fatality accident. All the defendants settled or were dismissed before trial except the trucking defendants. The highway fatality was caused when one defendant driver made an illegal U-turn on a highway as she left another defendant’s fruit stand. The plaintiffs’ daughter swerved to avoid the U-turn driver, lost control of her car, and crashed into the back of the trucking defendants’ diesel tractor-trailer. The truck driver had parked the truck on the side of the highway near the fruit stand, which the trucking defendants’ expert conceded fell below the standard of care.
Reprinted courtesy of
Krsto Mijanovic, Haight Brown & Bonesteel LLP,
Peter A. Dubrawski, Haight Brown & Bonesteel LLP,
Arezoo Jamshidi, Haight Brown & Bonesteel LLP and
Catherine M. Asuncion, Haight Brown & Bonesteel LLP
Mr. Mijanovic may be contacted at kmijanovic@hbblaw.com
Mr. Dubrawski may be contacted at pdubrawski@hbblaw.com
Ms. Jamshidi may be contacted at ajamshidi@hbblaw.com
Ms. Asuncion may be contacted at casuncion@hbblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Condos Down in Denver Due to Construction Defect Litigation
November 06, 2013 —
CDJ STAFFA new report suggests that fears of construction defect litigation may be the cause of the slump in condo building in the Denver area. The Denver Business Journal reports that the Denver Regional Council of Governments commissioned the study by Economic & Planning Systems. The conclusion of the report was that the only type of condominium likely to be built is high-cost units with high profit margins. This is not good news for the DRCOG, which is seeking to create more affordable housing.
The report found that builders assess the likeliness of being sued “is nearly 100 percent,” that costs of addressing construction defects are 12% higher than at apartment complexes, and that preparing for litigation adds about $15,000 to the cost of a condo unit.
One possible remedy is to reform Colorado’s construction defect laws. Bob Muphy, the mayor of Lakewook and an advocate of construction defect litigation reform, said that he sees “this as a verification of what I’ve been talking about.”
Read the court decisionRead the full story...Reprinted courtesy of
Contractual Waiver of Consequential Damages
January 21, 2019 —
David Adelstein - Florida Construction Legal UpdatesContractual waivers of consequential damages are important, whether they are mutual or one-sided. I believe in specificity in that the types of consequential damages that are waived should be detailed in the waiver of consequential damages provision. Standard form construction agreements provide a good template of the types of consequential damages that the parties are agreeing to waive.
But, what if there is no specificity in the waiver of consequential damages provision? What if the provision just states that the parties mutually agree to waive consequential damages or that one party waives consequential-type damages against the other party? Let me tell you what would happen. The plaintiff will argue that the damages it seeks are general damages and are NOT waived by the waiver of consequential damages provision. The defendant, on the other hand, will argue that the damages are consequential in nature and, therefore, contractually waived. FOR THIS REASON, PARTIES NEED TO APPRECIATE WHAT DAMAGES ARE BEING WAIVED OR LIMITED, AND POTENTIALLY THOSE DAMAGES NOT BEING WAIVED OR LIMITED, WHEN AGREEING TO A WAIVER OF CONSEQUENTIAL DAMAGES PROVISION!
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin NorrisMr. Adelstein may be contacted at
dma@kirwinnorris.com
