Safe Commercial Asbestos-Removal Practices
April 18, 2023 —
Emily Newton - Construction ExecutiveContractors must proceed with caution to safely remove asbestos and protect employees and commercial buildings. Only contractors licensed by the Environmental Protection Agency (EPA) in abatement should dispose of it, because the best asbestos-removal practices require high degrees of care and safety.
Asbestos is a stealthy material, quickly becoming airborne and contaminating other areas of the building and humans. No matter a contractor's tenure in the field, it's vital to remember the top practices in the industry as people learn more about elusive, toxic asbestos-containing materials (ACMs).
Wait for Technician and Inspector Feedback
It’s important to find out if a jobsite contains asbestos. Proceed with caution if the structure was built before the 1990s. The removal process shouldn't start immediately if a business suspects asbestos and reaches out to a company. Inspectors scope the situation and grab samples for lab testing to determine how abaters should handle the case. They will need to know every potential hiding place for the asbestos, analyzing everything from caulking to wiring for asbestos coatings and other variants of the substance. This may take time, but commercial contractors must wait until they receive this information before proceeding.
Reprinted courtesy of
Emily Newton, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Creeping Incrementalism in Downstream Insurance: Carriers are Stretching Standard CGL Concepts to Untenable Limits
October 17, 2023 —
Eric M. Clarkson - Saxe Doernberger & VitaIn the construction sector, the importance of closely vetting downstream parties’ insurance has never been more critical. The markets have been hardening with no seeming end in sight and carriers are looking for any way to get an edge. Owners and general contractors need to be on the lookout for ever broader carrier-specific expansions of standard insurance provisions that are perilous for risk transfer. We are seeing more and more terms that go against the intent of ISO standard which is what is almost universally required in construction contracts.
One area where carriers are deviating from standard concepts is within pre-existing injury or damage exclusions in Commercial General Liability (“CGL”) policies. It is almost a universal requirement that downstream parties provide additional insured coverage to owners and general contractors on ISO form CG 00 01. Generally, ISO standard language provides coverage for sums the insured becomes legally obligated to pay as damages because of bodily injury or property damage. One of the few main requirements to trigger coverage is that the injury or damage must occur during the policy period. Over the years, ISO standard language has evolved to exclude injury or damage if an insured or certain persons knew that it had occurred before the policy period. Additionally, injury or damage is deemed to have been known to have occurred under certain circumstances.
Read the court decisionRead the full story...Reprinted courtesy of
Eric M. Clarkson, Saxe Doernberger & VitaMr. Clarkson may be contacted at
EClarkson@sdvlaw.com
Calling Hurricanes a Category 6 Risks Creating Deadly Confusion
March 25, 2024 —
Brian K Sullivan - BloombergCategory 5 has become part of the world’s lexicon to describe a disaster of monumental proportion.
Now, thanks to climate change, a pair of scientists don’t think that is a dire enough level to describe hurricanes. They raise the possibility, on a “hypothetical” basis, for a Category 6.
Global warming has increased the energy available for storms to grow stronger, according to a paper by Michael Wehner, senior scientist at the Lawrence Berkeley National Lab, and James Kossin, climate and atmospheric professor at the University of Wisconsin. Their work was published in Proceedings of the National Academy of Sciences of the US.
The scientists make a case for adjusting the five-step, Saffir-Simpson Hurricane Wind Scale, which is used to describe hurricane power. A Category 5 is assigned when storm winds reach 157 miles per hour, and today that goes up to the limit of physics. Wehner and Kossin suggest considering anything over 192 mph a Category 6.
Read the court decisionRead the full story...Reprinted courtesy of
Brian K Sullivan, Bloomberg
When OSHA Cites You
April 22, 2024 —
Michael Metz-Topodas - Construction ExecutiveWith the strong bonds that form among construction project teams, workers looking out for each other helps keep safety foremost in everyone’s mind. But sometimes, even the very best intentions alone can’t prevent an occasional misstep—a forgotten hard hat, a sagging rope line—which can and often does result in an OSHA citation. These regulatory reminders can bring unfortunate consequences: penalties, higher insurance premiums, potential worker injury claims, loss of bidding eligibility, loss of reputation and even public embarrassment, because citations are published on OSHA’s website.
Due to citations’ adverse effects, contractors have incentives to minimize them. They can do this by asserting available defenses, because a citation is only an alleged violation, not a confirmed one. But making defenses available begins well before a citation is issued, well before OSHA arrives to a construction site and well before a violation even occurs. Instead, contractors’ ongoing safety programs should incorporate the necessary measures to preserve OSHA citation defenses in three key areas: lack of employee exposure, lack of employer knowledge and impossibility.
EMPLOYEE EXPOSURE
To sustain a citation against an employer, OSHA must not only identify an applicable standard that the company violated but also show that the violation exposed employees to hazards and risk of injury. Absent evidence of actual exposure, OSHA often makes this showing by asserting that performing job functions necessarily exposes employees to the cited hazard.
Reprinted courtesy of
Michael Metz-Topodas, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Mr. Metz-Topodas may be contacted at
michael.metz-topodas@saul.com
Multiple Construction Errors Contributed to Mexico Subway Collapse
June 21, 2021 —
Jim Parsons - Engineering News-RecordThe May 3 collapse of an elevated section of the Line 12 subway in Mexico City that killed 26 passengers appears to have resulted from multiple construction faults, according to a risk management firm's preliminary report.
Reprinted courtesy of
Jim Parsons, Engineering News-Record
ENR may be contacted at ENR.com@bnpmedia.com
Read the full story...
Read the court decisionRead the full story...Reprinted courtesy of
A Brief Primer on Perfecting Your Mechanics Lien When the Property Owner Files Bankruptcy
January 22, 2024 —
William L. Porter - Porter Law GroupOverview of the Mechanics Lien Law
This is a brief description of steps to be taken when the Owner of property on which you have recorded a mechanics lien files bankruptcy.
The California mechanics lien is a powerful tool for contractors, subcontractors and materials suppliers to secure payment of unpaid construction debts. A contractor, subcontractor or materials supplier is allowed to record a mechanics lien on real property, based on the value added to the property by the claimant during the construction process.
The recorded mechanics lien provides the claimant with legal right to force the sale of the improved real property and thereby obtain the funds necessary to pay the delinquent debt. Under the usual procedure, the first step is the recording of the mechanics lien with County Recorder’s office in the County where the property is located. A lawsuit to foreclose on the lien must then be filed in the County Superior Court of that County, within ninety (90) days after the mechanics lien is recorded. The goal of the lawsuit is to obtain a judgment for foreclosure on the mechanics lien in order to force a sale of the property. The net proceeds of the sale will be used to pay the unpaid construction debt secured by the recorded mechanics lien, assuming sale proceeds exceed the amount of senior liens and encumbrances.
Read the court decisionRead the full story...Reprinted courtesy of
William L. Porter, Porter Law GroupMr. Porter may be contacted at
bporter@porterlaw.com
Tennessee Looks to Define Improvements to Real Property
January 27, 2020 —
Lian Skaf - The Subrogation StrategistFor subrogation practitioners dealing with an installation-based statute of repose, knowing what is an improvement to real property is the first battle in what can, but does not have to be, a long fight. Like many other states, Tennessee’s statute of repose bars claims based on improvements to real property. Tennessee’s statute of repose runs four years after substantial completion of the improvement. See Tennessee Code Ann. § 28-3-202. In the case of Maddox v. Olshan Found. Repair & Waterproofing Co. of Nashville, L.P., E A, 2019 Tenn.App. LEXIS 464, 2019 WL 4464816, the Court of Appeals of Tennessee examined whether or not the work done by the defendant, Olshan Foundation Repair & Waterproofing Co. of Nashville, L.P., E.A. (Olshan) — which addressed bowing walls, cracks in the foundation and walls and water intrusion — qualified as improvements to real property for the purposes of the statute of repose. The court held that the work by Olshan essentially amounted to repairs, and did not qualify as improvements to real property.
In Maddox, the plaintiff, Rachel Maddox (Maddox), noticed cracking in her home in 2005 and hired Olshan to assess the issue and conduct necessary repairs. Olshan made several recommendations and the parties agreed on Olshan’s proposal for the price of $27,000. From their initial work in 2005 until late 2011, Olshan visited the property several times to address ongoing structural issues with the home. Eventually, eight months after Olshan told Maddox they could not fix the house and failed to return her phone calls, Maddox filed suit, alleging fraud against the company.
After a three-day bench trial, the trial court found in favor of the plaintiff for $187,000, plus $15,0000 in punitive damages. Among other holdings, the court rejected Olshan’s statute of repose defense. Olshan appealed, raising the statute of repose issue again.
Read the court decisionRead the full story...Reprinted courtesy of
Lian Skaf, White and Williams LLPMr. Skaf may be contacted at
skafl@whiteandwilliams.com
The A, B and C’s of Contracting and Self-Performing Work Under California’s Contractor’s License Law
July 19, 2017 —
Garret Murai - California Construction Law BlogThe California Contractors State License Board issues licenses in three general classifications:
- Class A – General Engineering Contractors;
- Class B – General Building Contractors; and
- Class C – Specialty Contractors of which there are currently 42 different Class C specialty contractors license types.
Each of these license classifications has separate contracting rules, and rules regarding when work can be self-performed, which for many can be confusing.
Minor Work Exception
One important (albeit “minor”) exception is that no contractor’s license is required no matter what type of work is being performed if the project has a value of less than $500. Known as the “minor work exception,” the exception is a project-based, not work-based, exception. Thus, for example, if a project owner is remodeling their kitchen at a cost of $6,000 and the cost of doing the flooring is only $300, the person doing the flooring would need to have a contractor’s license in the appropriate classification since the aggregate cost of the work is $500 or more.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Wendel Rosen Black & Dean LLPMr. Murai may be contacted at
gmurai@wendel.com