Does a Broker Forfeit His or Her Commission for Technical Non-Compliance with Department of Real Estate Statutory Requirements?
September 14, 2020 —
Kevin J. Parker - Snell & Wilmer Real Estate Litigation BlogIn a recent Arizona Court of Appeals case, CK Revocable Trust v. My Home Group Real Estate LLC, 2020 WL 4306183 (7/28/2020), the Court of Appeals addressed the distinction between “substantive” and “technical” statutory requirements for real estate broker commission agreements.
The Court explained that failure to comply with a substantive requirement would preclude the broker from recovering a commission, but failure to comply with a technical requirement would not. As examples of such substantive requirements, the Court identified the statutory requirement that the broker be licensed at the time the claim for commission arose, and the statutory requirement that the listing agreement be signed by both the broker and the client.
Read the court decisionRead the full story...Reprinted courtesy of
Kevin J. Parker, Snell & WilmerMr. Parker may be contacted at
kparker@swlaw.com
$24 Million Verdict Against Material Supplier Overturned Where Plaintiff Failed to Prove Supplier’s Negligence or Breach of Contract Caused an SB800 Violation
March 16, 2017 —
Jon A. Turigliatto, Esq. & Chelsea L. Zwart, Esq. – Chapman Glucksman Dean Roeb & Barger BulletinAcqua Vista Homeowners Assoc. v. MWL Inc. (2017) 2017 WL 371379
COURT OF APPEAL EXTENDS GREYSTONE HOMES, INC. v. MIDTEC, INC., HOLDING THAT CIVIL CODE §936 CREATES A NEGLIGENCE STANDARD FOR CLAIMS AGAINST MATERIAL SUPPLIERS BROUGHT UNDER SB800.
The Fourth District California Court of Appeal recently published its decision Acqua Vista Homeowners Assoc. v. MWI, Inc. (2017) 2017 WL 371379, holding that claims against a material supplier under SB800 (Civil Code §895 and §936) require proof that the SB800 violation was caused by the supplier's negligence or breach of contract.
Civil Code §936 states in relevant part, that it applies "to general contractors, subcontractors, material suppliers, individual product manufacturers, and design professionals to the extent that the general contractors, subcontractors, material suppliers, individual product manufacturers, and design professionals caused, in whole or in part, a violation of a particular standard as the result of a negligent act or omission or a breach of contract .... [T]he negligence standard in this section does not apply to any general contractor, subcontractor, material supplier, individual product manufacturer, or design professional with respect to claims for which strict liability would apply."
Acqua Vista Homeowners Association (the "HOA") sued MWI, a supplier of Chinese pipe used in the construction of the Acqua Vista condominium development. The HOA's complaint asserted a single cause of action for violation of SB800 standards, and alleged that defective cast iron pipe was used throughout the building. After trial, the trial court entered a judgment against MWI in the amount of $23,955,796.28, reflecting the jury's finding that MWI was 92% responsible for the HOA's damages.
MWI filed a motion for a directed verdict and motion for judgment notwithstanding the verdict on the grounds that the HOA had failed to present any evidence that MWI had caused an SB800 violation as a result of its negligence or breach of contract, and had therefore failed to prove negligence and causation as required by SB800, citing to Greystone Homes, Inc. v. Midtec, Inc.(2008) 168 Cal.App.4th 1194. The trial court denied both motions, relying on the last sentence of Civil Code §936, which states in part, "[T]he negligence standard in this section does not apply to any ... material supplier ... with respect to claims for which strict liability would apply."
The Court of Appeal reversed and ordered the trial court to enter judgment in favor of MWI. The Court of Appeal relied on the legislative history of S8800 and Greystone, which held that the first sentence of Civil Code §936 contains an "explicit adoption of a negligence standard" for S8800 claims against product manufacturers. The Court of Appeal reasoned that since §936 treats product manufacturers and material suppliers identically, the holding of Greystone must equally apply to material suppliers.
Because the complaint did not state a common law cause of action for strict liability, the HOA was required to prove that the damages were caused by MWI' s negligence or breach of contract. Although, the Court of Appeal found that while the HOA's evidence may have supported a finding that the manufacturer of the leaking pipes was negligent, the HOA had not provided any evidence that MWI, the supplier, had failed to supply the type of pipe ordered, acted unreasonably in failing to detect any manufacturing defects present in the pipe, or damaged it during transportation. Accordingly, the HOA could not prove that the alleged S8800 violation was caused, in whole or in part, by MWI' s negligence, omission, or breach of contract.
In light of the decision, homeowner and associations that allege only violations of SB800 standards without asserting a common law cause of action for strict liability cannot prevail by simply producing evidence of a violation, and are required to prove that violation was caused by the negligent act or omission, or breach of contract, of the defendant contractor, material supplier, and/or product manufacturer.
Reprinted courtesy of
Jon A. Turigliatto, Esq, Chapman Glucksman Dean Roeb & Barger and
Chelsea L. Zwart, Esq., Chapman Glucksman Dean Roeb & Barger
Mr. Turigliatto may be contacted at jturigliatto@cgdrblaw.com
Ms. Zwart may be contacted at czwart@cgdrblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Roadway Contractor Owed Duty of Care to Driver Injured Outside of Construction Zone
January 04, 2021 —
Garret Murai - California Construction Law BlogFor the roadway contractor it appeared to be an open and shut case:
Plaintiff car driver was stopped at a standard one-way “reversing lane closure” traffic control in which traffic going in one direction would be stopped while traffic going in the other direction was allowed to proceed, and then the procedure would be reversed.
Plaintiff, while stopped at the traffic control, was rear-ended by another vehicle driven by George Smithson. Smithson testified that he “must have looked off to the side” at some point prior to the collision because he did not see plaintiff’s vehicle before hitting it. He also testified that the primary reason the accident happened was that he was not paying attention and that he knew of no other cause of the accident.
For the roadway contractor you couldn’t ask for a better admission. And it ended in the trial court just the way you thought it would, with a win for the roadway contractor. That is, until it was appealed.
Read the court decisionRead the full story...Reprinted courtesy of
Garret Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
Before Celebrating the Market Rebound, Builders Need to Read the Fine Print: New Changes in Construction Law Coming Out of the Recession
November 26, 2014 —
Alan H. Packer - Newmeyer & Dillion, LLPAs the homebuilding market continues to improve, many builders find themselves maneuvering familiar roads. That said, important new realities have taken hold since the market collapse. Navigating these changes requires extra thought for practical and legal reasons.
Using Old Designs “Off the Shelf”?
The adoption of the California Building Standards Code in 2010, with an updated schedule to go into effect January 1, may complicate the use of older designs. In addition, some builders are contemplating building on pads constructed five or more years ago, temporarily shelved until market conditions improved. Because of changes in both the applicable Code and due to possible changes in the underlying soils and drainage, these projects require additional scrutiny before starting construction.
Mechanic’s Lien Law Changes
Not too long ago, the California Legislature recently overhauled the entire mechanic’s lien law system in California. New forms, new statutory references, new rules and deadlines are all applicable to projects under construction now. Make sure your documents are up to date, as the use of older forms (particularly for liens, progress payments, and final payments) could create legal problems in the future.
Indemnity Law Changes
Since 2006, California lawmakers have passed four rounds of legislation aimed at limiting indemnity provisions in construction contracts. The laws are aimed at two aspects of indemnity law: “Type 1” indemnity provisions, and liability for the costs of defending a claim.
Type 1 Indemnity. California law previously permitted a builder to obtain “Type 1” indemnity from its subcontractors for all claims. Under a Type 1 provision, if a claim arose out of the trade’s work, the trade was fully responsible to defend and indemnify the builder – even if other trades or the Builder were partially at fault. Some cases even allowed, typically in a commercial context, the builder to obtain Type 1 indemnity even if the trade was not negligent, as long as the claim involved its work.
Defense Obligation. In 2008, California’s highest court issued an opinion in Crawford v. Weather Shield, evaluating an indemnity provision requiring trade (a window supplier/manufacturer) to defend the builder in claims involving allegations of damages arising out of the trade’s work. Because the trade had contractually agreed to defend the builder, the Court held it responsible for the builder’s defense costs -- even though, ultimately, the trade was found
not liable for the actual damages claimed.
Recent legislation after Crawford has dramatically shifted how indemnity provisions will be enforced. Builders may no longer obtain Type 1 indemnity for residential construction defect claims covered by SB800; instead, indemnity is limited to the extent a claim arises out of the trade’s work. Even more recent legislation applied these changes to claims arising out of commercial construction projects. The recent legislation allows the trades “options” on how to defend the builder, with an eye toward requiring that they pay only a “reasonably allocated” portion for the builder’s defense costs.
Smart builders are refining their contract documents to take into account these new limitations on indemnity provisions.
Insurance Market Changes
Due to uncertainties in subcontractor insurance and other factors, many builders have also converted their liability insurance from a “bring your own” model to “wrap-up” insurance, where the builder’s policy also covers their trades. Builders should carefully examine their subcontracts in light of this change as well.
Trade Partner Changes
On a practical level, many trade partners, particularly in the residential sector, have gone out of business or moved on to greener pastures. Builders need to find and negotiate contracts with new trade partners on the fly, and educate them on the builders’ procedures for payment and construction.
SB800 documentation
A decade ago, most builders updated their purchase documents and subcontracts for California’s “Right to Repair Law” (also known as SB800), which set forth functionality standards for construction defects in residential housing, and procedures for resolving claims prior to litigation. Builders ramping up to meet market demand should examine how they implemented SB800 changes in contract documents. Issues to consider:
- Whether to opt out of -- or back into -- statutory procedures.
- Whether to include arbitration or judicial reference provisions to control where claims are litigated after the SB800 process.
- Re-training personnel to preserve SB800 rights, including sign-offs on purchase documentation and recordation of key documents.
- Recent Court of Appeal decisions have complicated the SB800 landscape, potentially opening the door to “common law” tort claims in at least subrogation contexts. Strategic planning at the document stage may be a good way to mitigate this risk as the cases wind their way through the judicial process.
The continuing surge in building activity is a welcome sign for builders who have weathered the storm. Before taking too many steps, builders should consult with counsel, their designers, and their insurance advisors to take into account the new realities of this recovering housing market.
About the Author
Alan H. Packer is a partner in the expanding Walnut Creek, CA, office of the law firm of
Newmeyer & Dillion LLP whose specialties include real estate, insurance, and construction litigation. To reach Alan, call 925.988.3200 or email him at alan.packer@ndlf.com.
Read the court decisionRead the full story...Reprinted courtesy of
Bill to Include Coverage for Faulty Workmanship Introduced in New Jersey
December 04, 2013 —
CDJ STAFFOn November 25, Gary S. Schaer, a Democrat from Bergen and Passic, introduced a bill into the New Jersey legislature that would require insurers to cover faulty workmanship. The bill would require commercial liability insurance policies to cover “property damage or bodily injury resulting from faulty workmanship.” Policies that do not provide this coverage could not be offered in the state of New Jersey should the measure pass and be enacted into law.
Read the court decisionRead the full story...Reprinted courtesy of
Construction Law Client Alert: Hirer Beware - When Exercising Control Over a Job Site’s Safety Conditions, You May be Held Directly Liable for an Independent Contractor’s Injury
April 06, 2011 —
Mark VonderHaar and Yvette DavisOn February 24, 2011, the California Court of Appeal held in Jeffrey Tverberg, et al v. Fillner Construction, Inc. that the imposition of direct liability on a hirer turns on whether the hirer exercised retained control of worksite safety in such a manner that affirmatively contributed to the independent contractor’s injury. Twice, Tverberg, an independent contractor hired by a general contractor's subcontractor, asked the general contractor to make the job site safe by covering up open holes created by another unrelated subcontractor while Tverberg was working at the site. After Tverberg was injured at the site by falling in a hole, he sued both the general contractor and the subcontractor which had hired him.
The Court of Appeal reasoned that when the general contractor instructed another subcontractor to create a condition that was potentially dangerous (i.e., creating open and uncovered bollard holes), and simultaneously required Tverberg to perform unrelated work near the open holes, the general contractor s conduct may have constituted a negligent exercise of its retained control which affirmatively contributed to Tverberg’s injury. The Court also reasoned that the general contractor affirmatively assumed responsibility for the safety of the workers near the holes by only requiring stakes and safety ribbon, and negligently discharged that responsibility which resulted in injury.
Read the full story...
Reprinted courtesy of Mark VonderHaar and Yvette Davis of Haight Brown & Bonesteel. Mr. VonderHaar can be contacted at mvonderhaar@hbblaw.com and Ms. Davis at ydavis@hbblaw.com.
Read the court decisionRead the full story...Reprinted courtesy of
Sweat the Small Stuff – Don’t Overlook These Three (3) Clauses When Negotiating Your Construction Contract
April 08, 2024 —
Bill Shaughnessy - ConsensusDocsReviewing and understanding the terms of your construction contract before signing on the dotted line (ideally with counsel involved) is an obvious best practice – whether you are owner, general contractor, design-professional or down-tier subcontractor or supplier. Typically, during this review process, parties pay closest attention to terms relating to price, scope, schedule, insurance, indemnification, and damages. And rightfully so, as these are just some of the most fundamental and important clauses of any construction contract.
But during this review and understanding process, parties often overlook and fail to fully review and understand several notably important contract provisions (other than the examples above) which can have just as significant an impact on the project and even unintended consequences once construction starts. This article discusses three (3) of these often-overlooked provisions which should also be carefully reviewed to ensure the project runs smoothly and to avoid unintended consequences or even disputes (and litigation) during construction:
- Incorporation by reference clause;
- Order of precedence or higher standard clause; and
- Choice of law clause.
Read the court decisionRead the full story...Reprinted courtesy of
Bill Shaughnessy, Jones Walker LLP (ConsensusDocs)Mr. Shaughnessy may be contacted at
bshaughnessy@joneswalker.com
Conflicts of Laws, Deficiency Actions, and Statutes of Limitations – Oh My!
May 10, 2017 —
Ben Reeves - Snell & Wilmer Real Estate Litigation BlogWhat law governs a deficiency action if the choice-of-law provisions in the note and deed of trust conflict? The Arizona Court of Appeals answered that very question in ZB, N.A. v. Hoeller, No. 1 CA-CV 16-0071 (Ct. App. April 15, 2017). It turns out, the note controls.
The Facts
In ZB, ZB, N.A. (ZB), a Utah bank, lent money to the Hoellers to purchase a commercial property in Missouri. The note included a choice-of-law provision stating that Utah law governed the debt. The deed of trust securing the commercial property, however, provided that Missouri law controlled “procedural matters related to the perfection and enforcement of [ZB’s] rights and remedies against the [p]roperty.” In 2012, the Hoellers defaulted, and the bank recovered the property through a trustee’s sale.
Read the court decisionRead the full story...Reprinted courtesy of
Ben Reeves, Snell & WilmerMr. Reeves may be contacted at
breeves@swlaw.com