Changes To Commercial Item Contracting
May 29, 2023 —
Marcos R. Gonzalez - ConsensusDocsThe FAR Council has recently published two changes to commercial item contracting that clarify the definition of commercial services and simplify commercial item determinations (“CIDs”) for contracting officers (“COs”). Since the 1990s, the federal government has encouraged the purchase of commercial items to ease the regulatory burden on vendors who have not previously conducted federal business, encourage innovation, and lower prices[
1]. These different objectives (cost savings, broadening markets, innovation) often have corollary policies; for example, vendors who are not accustomed to the regulatory burdens of government business are encouraged to enter the market by being exempted from a slew of regulations (found in standard commercial items clause FAR 52.212-4). As a result, the regulations applicable to commercial item contracting are those required by statute and executive orders in addition to generic commercial terms that may be tailored due to potential variation in commercial terms.[
2]
Commercial Products v. Commercial Services
The first change, in effect since November 2021 pursuant to the 2019 National Defense Authorization (“NDAA”), split the old definition of “commercial item” into two separate definitions: “commercial product” and “commercial service.”[
3] We are now blessed with the following definitions of commercial products and services, respectively:
Commercial product means—
(1) A product, other than real property, that is of a type customarily used by the general public or by nongovernmental entities for purposes other than governmental purposes, and–
(i) Has been sold, leased, or licensed to the general public; or
(ii) Has been offered for sale, lease, or license to the general public;
Reprinted courtesy of
Marcos R. Gonzalez, Peckar & Abramson, P.C.
Mr. Gonzalez may be contacted at mgonzalez@pecklaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Construction Workers Face Dangers on the Job
November 18, 2011 —
CDJ STAFFOSHA calculates that for each 33,000 active construction workers, one will die on the job each year, making their risk over the course of their careers at one out of every 200 workers. This puts it many times over OSHA’s definition of “significant risk” of 1 death per 1,000 workers over the course of their careers. According to an article in People’s World, “the main risk of death is from falls.”
At a talk at the American Public Health Association’s meeting, one expert noted that “construction workers make up 6 percent to 8 percent of all workers, but account for 20 percent of all deaths on the job every year.”
Read the full story…
Read the court decisionRead the full story...Reprinted courtesy of
Port Authority Revises Plans for $10B Midtown NYC Bus Terminal Replacement
March 04, 2024 —
Marigo Farr - Engineering News-RecordNew York City's Midtown Manhattan bus terminal replacement project advanced last week after the Port Authority of New York and New Jersey released a draft environmental impact statement and a revised project plan based on feedback from commuters, residents and local officials.
Reprinted courtesy of
Marigo Farr, Engineering News-Record
ENR may be contacted at enr@enr.com
Read the full story... Read the court decisionRead the full story...Reprinted courtesy of
More Regulations for Federal Contractors
October 08, 2014 —
Craig Martin – Construction Contractor AdvisorThe Office of Federal Contract Compliance Programs (OFCCP) has been busy. In the last several weeks, the OFCCP has proposed regulations that will require contractors and subcontractors to provide summary compensation data and another rule prohibiting federal contractors and subcontractors from discriminating against employees or applicants who inquire about, discuss, or disclose their own compensation or the compensation of another employee or applicant.
Equal Pay Report
The OFCCP has proposed Summary Compensation regulations which would require federal contractors and subcontractors with more than 100 employees to “provide summary data on the compensation paid to employees by sex, race, ethnicity, specified job categories, and other relevant data points.” Covered employers would have to submit three types of information:
1. the total number of workers within a specific EEO-1 job category by race, ethnicity and sex;
Read the court decisionRead the full story...Reprinted courtesy of
Craig Martin, Lamson Dugan and Murray, LLPMr. Gopal may be contacted at
pgopal2@bloomberg.net
Technology and the Environment Lead Construction Trends That Will Continue Through 2019
June 03, 2019 —
Ryan Gould - Construction ExecutiveThere are common factors that have always defined trends in the construction industry. Elements such as labor (be it shortages or surpluses), the economy and technology determine what gets built where, when and how.
These elements have led to the rise of entire philosophies to boost profits and maximize value, such as the lean construction movement. Often these trends appear in the form of answers that help construction companies eliminate waste, curb overproduction, use talent properly, manage inventory more effectively, boost process workflow, reduce defects, and help to plan and schedule projects more efficiently.
In 2019, two factors are driving trends that are overtaking the industry: technology and the environment. They’re not only informing construction industry trends today, but they’re going to last and evolve into the foreseeable future.
Offsite construction becomes standard
Obviously, this isn’t a new trend. The earliest origins of this method, at least in North America, date to colonists importing pre-packaged construction materials from Europe to the New World in the 17th century. Then there were the kit homes sold by Sears, Roebuck, and Co. at the turn of the 20th century. And of course, the trend reached its zenith in the World War II construction boom with pre-fab companies selling ready-to-go homebuilding components to builders.
Reprinted courtesy of
Ryan Gould, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Building Codes Evolve With High Wind Events
November 14, 2018 —
William L. Coulbourne - Construction ExecutiveDesigns for wind loads have been in building codes for a long time. Prior to the creation of the International Building Code, the three primary legacy codes had wind load provisions but they mostly dealt with wind loads on the building frame and had little load information about the building components or the exterior cladding.
Since Hurricane Andrew in 1992, building codes include more wind design information that comes from disaster investigations and wind engineering research conducted primarily at the university level. In 2000, the legacy building codes were replaced with the International Building Code (IBC). Residential buildings must comply with the International Residential Code (IRC). Both of these building code documents reference the engineering load standard, ASCE 7 Minimum Design Loads and Other Criteria for Buildings and Other Structures. This load standard has also been in existence for a long time; it now is revised every six years and the building codes revised every three years (IBC and IRC) reference ASCE 7 so the provisions in ASCE 7 become part of the building code requirements.
Reprinted courtesy of
William L. Coulbourne, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Insurance Law Alert: Ambiguous Producer Agreement Makes Agent-Broker Status a Jury Question
September 10, 2014 —
Valerie A. Moore & Christopher Kendrick - Haight Brown & Bonesteel LLPIn Douglas v. Fidelity National Ins. (No. A137645; filed 8/29/14), a California appeals court held that it was a jury question whether a retail insurance service with limited binding authority should be deemed a broker or an agent for the purpose of determining if application misrepresentations would void coverage.
In Douglas, the homeowners needed insurance for a house they had used as a group home. They sought coverage from Cost-U-Less, which provided personal lines insurance from, among others, Fidelity National Insurance Company. According to the couple’s wife, she went to a Cost-U-Less office where she answered application questions from a person on the telephone, who was later identified as an employee of another company, InsZone.
InsZone had a producer contract with Fidelity. In practice, InsZone would be contacted by Cost-U-Less via telephone, at which point an InsZone employee would verbally solicit information from the client, with the information being entered into a computer by the InsZone employee and then transmitted electronically to Fidelity.
Reprinted courtesy of
Valerie A. Moore, Haight Brown & Bonesteel LLP and
Christopher Kendrick, Haight Brown & Bonesteel LLP
Ms. Moore may be contacted at vmoore@hbblaw.com; Mr. Kendrick may be contacted at ckendrick@hbblaw.com
Read the court decisionRead the full story...Reprinted courtesy of
Pennsylvania Supreme Court: Fair Share Act Does Not Preempt Common Law When Apportioning Liability
March 09, 2020 —
Mark T. Caloyer & Joelle Nelson - Lewis Brisbois NewsroomOn February 19, 2020, the Pennsylvania Supreme Court issued a long awaited opinion in the matter of Roverano v. John Crane, Inc., No. 26 EAP 2018, No. 27 EAP 2018 (Pa. 2020). The Court’s opinion is a must-read for anyone involved in asbestos litigation in Pennsylvania.
In Roverano, the Court ruled that Pennsylvania’s Fair Share Act (42 Pa.C.S. § 7102) does not preempt Pennsylvania common law favoring per capita apportionment of liability to strict liability defendants. In addition, the Court ruled that bankruptcy trusts, that are either joined as third-party defendants or that have entered into a release with the plaintiff, may be included on the verdict sheet for purposes of liability.
In this case, Mr. Roverano sued 30 defendants in strict liability and Defendant Crane filed a joinder complaint against Johns-Manville Personal Injury Trust. The case proceeded to trial against eight defendants in the Court of Common Pleas of Philadelphia County. At trial, some of the defendants filed motions in limine seeking a ruling that the Fair Share Act applied to asbestos cases. The trial court denied the motion, concluding that asbestos exposure cannot be quantified, and held that that it would apportion liability on a per capita basis consistent with the Court’s opinion in Baker v. AC&S, 755 A.2d 664 (Pa. 2000).
Reprinted courtesy of
Mark T. Caloyer, Lewis Brisbois and
Joelle Nelson, Lewis Brisbois
Mr. Caloyer may be contacted at Mark.Caloyer@lewisbrisbois.com
Ms. Nelson may be contacted at Joelle.Nelson@lewisbrisbois.com
Read the court decisionRead the full story...Reprinted courtesy of