Cambridge Massachusetts Building Expert Directory

Meet Daniel Hall, Assistant Professor at TU Delft

January 17, 2023 — Aarni Heiskanen - AEC Business
We sat down with Daniel M. Hall, an assistant professor at TU Delft, to discuss ways of achieving circularity in the built environment. Daniel will be a keynote speaker at WDBE in September 2023, where he’ll talk more about future circular cities. Daniel is internationally known for his research on construction management and construction informatics. He did his Ph.D. at Stanford and worked for almost five years as an Assistant Professor of Innovative and Industrial Construction at ETH Zurich. In September 2022, he moved to the Netherlands. The Delft University of Technology, Daniel’s new home base, strongly emphasizes the circular economy and circularity and has a long history of excellent teaching and research. It provides an inspiring environment for innovating the future. Why we need to improve circularity in cities “We cannot keep building the way we’ve been building. We don’t have enough resources; we don’t have enough materials,” Daniel asserts. “Obviously, we have questions around carbon impact. Around 40 percent of all CO2 emissions come from a combination of building operations and building materials.” Read the court decision
Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Two-Part Series on Condominium Construction Defect Issues

May 19, 2014 — Beverley BevenFlorez-CDJ STAFF
Gregory L. Shelton, construction law attorney at Horack, Talley, Pharr & Lowndes, P.A., wrote a two-part series in the Charlotte Observer about condominium construction defect issues. The first part described “common defects and their consequences,” while the second part explained “how legal time limits can prevent the association or its owners from suing the parties responsible for defective construction.” If interested in purchasing a condo unit, Shelton recommended hiring a building inspector, though he cautioned that “the inspector should be truly independent. His client should be you and not ‘the sale.’” In the second part, Shelton discussed the complexities of statutes of limitations and statutes of repose. Read the full story, Part 1... Read the full story, Part 2... Read the court decision
Read the full story...
Reprinted courtesy of

Unlocking the Potential of AI and Chat GBT in Construction Management

September 11, 2023 — Matthew DeVries - Best Practices Construction Law
The construction industry is one of the most complex and challenging sectors. Projects can be highly demanding and require a significant amount of planning and coordination to complete successfully. However, with advancements in technology, specifically the use of artificial intelligence (AI) and chat GBT, the construction industry can experience a transformation in how it operates. One of the significant challenges in construction projects is the management of data. Information is collected from various sources and needs to be organized and analyzed to make informed decisions. AI can play a significant role in data analysis by providing real-time insights into the project’s progress. This can help in predicting potential delays, identifying areas where cost savings can be made, and even improve safety measures. Chat GBT, a natural language processing tool, can assist in project management by acting as a virtual assistant to construction managers. The software can be programmed to answer questions about the project, provide updates on the progress, and even suggest solutions to potential problems. This can help in reducing the workload of the project manager and allow them to focus on other critical tasks. Read the court decision
Read the full story...
Reprinted courtesy of Matthew DeVries, Burr & Forman LLP
Mr. DeVries may be contacted at mdevries@burr.com

Crane Firm Pulled Off NYC Projects Following Multiple Incidents

October 07, 2019 — Jeff Rubenstone - Engineering News-Record
Following a partial crane collapse at a site on Manhattan’s Lower East Side and a fatality in April on a jobsite in lower Manhattan, the New York City Dept. of Buildings announced on Aug. 12 that it is suspending United Crane & Rigging’s work on 21 construction sites across the city. Jeff Rubenstone, Engineering News-Record Mr. Rubenstone may be contacted at rubenstonej@enr.com Read the court decision
Read the full story...
Reprinted courtesy of

Arizona Supreme Court Clarifies Area Variance Standard; Property Owners May Obtain an Area Variance When Special Circumstances Existed at Purchase

October 19, 2017 — Nick Wood, Adam Lang, Noel Griemsmann, & Brianna Long – Snell & Wilmer Real Estate Litigation Blog
In Pawn 1st v. City of Phoenix, the Arizona Supreme Court rejected a Court of Appeals rule that would have unduly restrained alienation of property in Arizona. The Court of Appeals found that the City of Phoenix Board of Adjustment acted beyond its authority when it granted an area variance to a pawn shop where the special circumstances causing a need for the variance existed before the pawn shop purchased the property. Under Arizona law, boards of adjustment cannot grant an area variance where the special circumstances requiring the variance are self-imposed. The Court of Appeals adopted a rule that knowledge of special circumstances at the time of purchase made the special circumstances self-imposed, foreclosing the purchaser’s ability to obtain a variance. This rule would have severely restricted property purchasers’ ability to obtain area variances in Arizona and by extension likely strained property transactions. The underlying case involved a pawn shop that was proposed in southeast Phoenix. After the property purchaser obtained approval for a required use permit (for a pawn shop) and a variance (for a 500 foot residential setback) from the City of Phoenix Board of Adjustment, a competing pawn shop filed a special action arguing that the variance was a use variance, not an area variance, beyond the board of adjustment’s authority. Reprinted courtesy of Snell & Wilmer attorneys Nick Wood, Adam Lang, Noel Griemsmann and Brianna Long Mr. Wood may be contacted at nwood@swlaw.com Mr. Lang may be contacted at alang@swlaw.com Mr. Noel may be contacted at ngriemsmann@swlaw.com Ms. Brianna may be contacted at bllong@swlaw.com Read the court decision
Read the full story...
Reprinted courtesy of

Basement Foundation Systems’ Getting an Overhaul

October 22, 2014 — Beverley BevenFlorez-CDJ STAFF
Builder reported that “[a] new game-changing system, recently recognized for its energy-efficient composite approach to basement construction, soon could change how American builders construct foundations.” Epitome composite foundation walls from Composite Panel Systems (CPS) “was awarded the Composites and Advanced Materials Exposition’s Unsurpassed Innovation Award in Orlando, Fla., on Oct. 14.” The system “combines integrated stud cavities for mechanicals, insulation, the top plate, and a vapor barrier in a single step.” It has been approved for use in Wisconsin, and is expected to receive International Building code and International Residential Code compliance later this year. Read the court decision
Read the full story...
Reprinted courtesy of

The Texas Supreme Court Limits the Use of the Economic Loss Rule

September 03, 2014 — Beverley BevenFlorez-CDJ STAFF
According to David Fisk of Kane Russell Coleman & Logan PC, in an article published by JD Supra Business Advisor, “[T]he Texas Supreme Court issued a per curium opinion limiting the application of the economic loss doctrine or rule, as it is referred to in Texas, in the context of residential construction defect claims.” In Chapman Custom Homes, Inc. v Dallas Plumbing Co., the court “ruled that a plumbing subcontractor assumes an implied duty not to flood or otherwise damage a home while performing its contract with a builder” and that “the economic loss rule does not apply in this context.” Read the court decision
Read the full story...
Reprinted courtesy of

Product Liability Alert: Evidence of Apportionment of Fault Admissible in Strict Products Liability Action

March 26, 2014 — R. Bryan Martin and Kristian B. Moriarty - Haight Brown & Bonesteel LLP
In Romine v. Johnson Controls, Inc. (No. B239761, filed March 17, 2014), the California Court of Appeal for the Second District held that a trial court must permit a defendant, in a products liability action, to present evidence of apportionment of fault among settling and non-settling entities. The case involved an automobile collision in which the plaintiff was struck from behind, causing the driver’s seat to recline and propel plaintiff into the back seat where she struck her head. Plaintiff was left quadriplegic as a result. Plaintiff brought suit against the driver who caused the accident, the Nissan entities who manufactured the car plaintiff was driving, Johnson Controls, Inc. (“Johnson”), Ikeda Engineering Corporation (“Ikeda”), Vintec Co. (“Vintec”), and Autoliv ASP, Inc., who designed and manufactured the driver’s seat of the vehicle plaintiff was driving, and against Faurecia Automotive Seating, Inc. who manufactured the recliner mechanism of plaintiff’s vehicle’s front seat. Ikeda participated in the design of the driver’s seat and Vintec manufactured the driver’s seat. Johnson manufactured the seat belt for the driver’s seat of plaintiff’s vehicle in accordance with Nissan’s design. Prior to trial, plaintiff settled with the defendant driver, the Nissan defendants, the Autoliv defendants, and Faurecia Automotive Seating, Inc. Plaintiff elected to proceed to trial solely on a cause of action for strict products liability against Ikeda and Vintec. Pursuant to a stipulation, Johnson agreed it would be legally responsible for damages awarded to plaintiff at trial based upon the actions of Vintec or Ikeda. At trial, the court precluded Vintec and Ikeda from offering evidence that: (1) plaintiff would not have been injured if her vehicle’s seat belt was designed in a different manner by Nissan; (2) Nissan chose the manufacturer of the recliner mechanism and required defendants to use that manufacturer and that part in the seat; and (3) The other defendants had already reached settlements with plaintiff. Reprinted courtesy of R. Bryan Martin, Haight Brown & Bonesteel LLP and Kristian B. Moriarty, Haight Brown & Bonesteel LLP Mr. Martin may be contacted at bmartin@hbblaw.com; Ms. Moriarty may be contacted at kmoriarty@hbblaw.com Read the court decision
Read the full story...
Reprinted courtesy of

CAMBRIDGE MASSACHUSETTS BUILDING EXPERT DIRECTORY AND CAPABILITIES