Biden’s Buy American Policy & What it Means for Contractors
February 22, 2021 —
Meredith Thielbahr & Nicole Lentini - Gordon & Rees Construction Law BlogJanuary 25, 2021, President Biden signed an Executive Order (EO) “Ensuring the Future is Made in All America by All of America’s Workers”, which seeks to bolster U.S. manufacturing through the federal procurement process. Note that, just six day earlier, on January 18, the Federal Acquisition Regulation (FAR) Counsel issued a final rule implementing former President Trump’s July 2019 EO, titled “Maximizing Use of American-Made Goods, Products, and Materials” (EO No. 13881) on the then-current Buy American standards. For context, Trump’s proposed revisions – adopted and implemented by the FAR Council earlier this year – imposed three (3) significant changes worth noting: (1) increasing the percentage of domestic content (other than iron or steel) from 50% to 55% that an end product must contain in order to qualify as a “domestic end product”; (2) implementing an even higher increase in the domestic content requirement for iron and steel products to at least 95% U.S. “predominately” iron or steel product; and (3) increasing the price evaluation preference for domestic offerors from 6% to 20% (for other than small business) and 30% (for small businesses). The FAR’s rule became effective January 21, 2021, and applies to solicitations issued on or after February 22, 2021, and resulting contracts let. Biden’s EO rescinds Trump’s EO No. 13881 “to the extent inconsistent with [Biden’s] EO.” However, when dissected, it is clear Biden’s Buy American plan does little to modify thresholds inconsistent with the Trump Administration; rather, the White House’s latest EO implements changes in the form of BA administration. Nonetheless, Biden’s EO does expressly note that it supersedes and replaces Trump’s EO on the same issues.
Reprinted courtesy of
Meredith Thielbahr, Gordon & Rees and
Nicole Lentini, Gordon & Rees
Ms. Thielbahr may be contacted at mthielbahr@grsm.com
Ms. Lentini may be contacted at nlentini@grsm.com
Read the court decisionRead the full story...Reprinted courtesy of
Burden Supporting Termination for Default
January 11, 2021 —
David Adelstein - Florida Construction Legal UpdatesTerminating a contractor for default is a “‘drastic sanction’ and ‘should be imposed (or sustained) only for good grounds and on solid evidence.’” Cherokee General Corp. v. U.S., 150 Fed.Cl. 270, 278 (Fed.Cl. 2020) (citation omitted). This is true with any termination for default because terminating a contract for default is the harshest recourse that can be taken under a contract. It is a caused-based termination. For this reason, the party terminating a contract for default needs to be in a position to carry its burden supporting the evidentiary basis in exercising the default-based (or caused-based) termination. Stated differently, the party terminating a contract for default needs to justify the reasonableness in terminating the contract for default.
A party looking to terminate a contract for default should smartly work with counsel to best position its justification in exercising the termination for default. Likewise, a contractor terminated for default should immediately work with counsel to best position the unreasonableness or the lack of justification for the default-based termination.
Read the court decisionRead the full story...Reprinted courtesy of
David Adelstein, Kirwin Norris, P.A.Mr. Adelstein may be contacted at
dma@kirwinnorris.com
Real-Estate Pros Fight NYC Tax on Wealthy Absentee Owners
October 15, 2014 —
Henry Goldman and Allyson Versprille – BloombergA political battle is brewing at the apex of New York’s property market.
The real-estate industry is mobilizing to kill a proposed levy on non-resident owners of apartments valued at more than $5 million, seeking to ensure the world’s biggest city doesn’t follow London, Hong Kong and Singapore in extracting extra cash from trophy properties.
The industry’s lobbying arm, the Real Estate Board of New York, says the measure will scare off investors who fuel a business supporting more than 500,000 jobs and generating 40 percent of the five boroughs’ revenue. Brokers warn of economic calamity if officials slap a luxury tax on apartments owned by someone who lives in the city less than half the year.
Mr. Goldman may be contacted at hgoldman@bloomberg.net; Ms. Versprille may be contacted at aversprille1@bloomberg.net
Read the court decisionRead the full story...Reprinted courtesy of
Henry Goldman and Allyson Versprille, Bloomberg
3D Printing: A New Era in Concrete Construction
April 11, 2022 —
Zoey Zhao - Construction ExecutiveThe construction of buildings using concrete has been around since the time of the Romans. In all those centuries, concrete structures have been built using essentially the same method: forms, reinforcement, mixing, pouring, setting, repeat.
The process is costly and time-consuming. The construction of the forms alone demands dozens of workers and requires a substantial amount of lumber, keeping labor and materials costs high. Builders might save some time using prefabricated concrete blocks, but such materials are not appropriate for every construction project and carry their own expenses.
For the first time in history, builders have an alternative to traditional concrete construction methods that are more cost-effective, less expensive, more environmentally friendly and allow for a wide range of possible construction projects. Three-dimensional concrete printing for construction has emerged in the building field as a viable and efficient alternative.
Reprinted courtesy of
Zoey Zhao, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the court decisionRead the full story...Reprinted courtesy of
Ms. Zhao may be contacted at
zoey@aictbuild.com
Vermont Supreme Court Reverses, Finding No Coverage for Collapse
May 18, 2020 —
Tred R. Eyerly - Insurance Law HawaiiThe Vermont Supreme Court reversed the trial court's decision for collapse coverage. Commercial Constr. Endeavors, Inc. v. Ohio Sec. Ins. Co., 2019 Vt. LEXIS 173 (Vt. Sup. Ct. Dec. 13,2019).
Commercial Construction Endeavors, Inc. (CCE) built a livestock barn. By late December 2014, the barn was partially complete, with the foundation laid, wood framing erected, and roof trusses installed. In late December, strong winds caused the structure to collapse. CCE started clearing debris and rebuilding the barn, incurring additional labor and material costs.
CCE reported the collapse to Ohio Security. The policy covered loss to "Covered Property." Ohio Security determined that the loss was covered for "Off-Premises Property Damage Including Care, Custody or Control." This endorsement provided coverage for damage to real property upon which CCE was performing operations where the damage resulted from those operations. Ohio Security paid CCE $24,750, the full amount available under the endorsement, less a $250 deductible.
Read the court decisionRead the full story...Reprinted courtesy of
Tred R. Eyerly, Damon Key Leong Kupchak HastertMr. Eyerly may be contacted at
te@hawaiilawyer.com
GAO Sustains Unsupported Past Performance Evaluation and Unequal Discussion Bid Protest
November 23, 2016 —
Lindsay K. Taft – Ahlers & Cressman PLLC Construction Law BlogRotech Healthcare, Inc., a healthcare contractor, recently successfully protested the award of a home oxygen and durable medical equipment contract by the Department of Veterans Affairs to Lincare, Inc. based on an unsupported past performance evaluation and allegations of an unequal discussion. See GAO Protest File Number: File: B-413024 (August 17, 2016). The Request for Proposals (“RFP”) provided that award would be made on a “best value” basis to the offeror whose proposal was most favorable to the government[…]
Read the court decisionRead the full story...Reprinted courtesy of
Lindsay K. Taft, Ahlers & Cressman PLLC Construction Law BlogMs. Taft may be contacted at
ltaft@ac-lawyers.com
7 Areas where Technology is Shifting the Construction Business
November 21, 2018 —
Eric Weisbrot – JW Surety BondsThe digital transformation of the last two decades has taken hold of the business environment in a powerful way. Companies in nearly all sectors are experiencing a significant shift in the way business is done, with a heavy focus on improved productivity, increase profitability, and enhanced product and service offerings. The construction industry has been historically slow to update its processes and business models in-line with other industries, but technology is currently making its long-awaited appearance in the sector. Construction professionals can embrace these new solutions to run more efficient businesses and keep a closer eye on profitability by reducing
common costs over time.
These are the seven major areas where technology is changing construction.
1 - Business Management
One of the most apparent shifts taking place in the construction industry thanks to technology is the advancement of business processes and systems behind the scenes. Construction managers and job site owners have countless
digital tools at their fingertips to help with managing all aspects of the business. This includes more efficient ways to manage material use and equipment inventory, logging subcontractor hours and pay, and maintaining reporting requirements from regulatory perspectives. Many software solutions integrate with older, legacy systems, making this change an easy one for construction businesses across the board.
2 – Jobsite Productivity
Another area of transformation in construction is productivity on each job site. Technology has offered job owners and general contractors more efficient methods to keep track of project timelines as well as subcontractor progress from start to finish. The technology advancements in this arena come in the form of wearable devices that track work performed, as well as mobile devices that help keep the often mundane tasks necessary for a project’s success up to date and completed on time.
3 – Worker Safety
Although wearables are being utilized in several different ways in the construction business, these devices are making a significant difference in the safety of workers. From smart helmets to digitally enhanced eyewear, workers are alerted to potential hazards on the job that they otherwise could not identify. Similarly, augmented and virtual reality solutions are being used to train workers before they arrive at a job, preparing them for safety concerns well in advance. Even though most licensed and
bonded construction workers have appropriate training throughout their careers, the addition of these resources has the ability to further reduce the risks often associated with construction work.
4 – Surveying and Monitoring
Unmanned aerial vehicles, also known as
drones, are being used throughout construction. These digital tools are equipped with cameras to offer a bird’s eye view of a construction site to help with surveying and identifying potential hazards for workers. Drones also help with inspections throughout a project’s progression, offering some reduction in cost and improving efficiencies.
5 – Improved Materials
Technology is also playing a role in the materials used on job sites. The addition of 3D printing has proven beneficial for construction companies, as concrete composites, plastics, and other materials are being printed and used to create structures on-site. This offers a more cost-effective and accurate way to complete a project.
6 – Self-operating Equipment
Some technology firms are making waves in the construction industry because they are currently developing and implementing
autonomous equipment solutions. Heavy machinery, like excavators, bricklayers, and bulldozers, are already being used on construction sites to help ease the burden of the labor shortage in the industry. While these machines are not yet mainstream, the benefits they offer mean they are likely to become a staple in construction in the years to come.
7 – Big Data
Finally, technology is shifting the construction business by way of big data analytics. With the detailed information from new software solutions, wearable tech, and drones, construction site managers have more data than they have ever had. This influx of information offers a way to analyze job site progress, budgets, timelines, and efficiency for companies large and small.
Author:
Eric Weisbrot is the Chief Marketing Officer of
JW Surety Bonds. With years of experience in the surety industry under several different roles within the company, he is also a contributing author to the surety bond blog.
Read the court decisionRead the full story...Reprinted courtesy of
Almost Half of Homes in New York and D.C. Are Now Losing Value
September 03, 2015 —
Prashant Gopal – BloombergAlmost half of single-family houses in the New York and Washington metropolitan areas are losing value, a sign that buyers' tolerance for high prices in many large U.S. cities may be reaching a limit.
The values of 45 percent of houses in both the Washington and New York areas slumped by at least 2 percent in June from a year earlier, according to a new index created by Allan Weiss, co-founder of the Case-Shiller home price indexes. In June 2014, only 15 percent of Washington residences dropped in value, while 20 percent fell in New York. Because the index is of only single-family homes, it doesn't include Manhattan. More properties also were in decline in Los Angeles, Chicago, Phoenix and Miami.
Read the court decisionRead the full story...Reprinted courtesy of
Prashant Gopal, Bloomberg
